නිෂ්පාදනය අවසන්view
The Intermatic PE953 MULTIWAVE wireless hand-held controller is designed to transmit user commands and receive equipment data from various devices, including the PE650, PE653, specific OEM equipment, and any Z-Wave compatible transceiver device. This all-in-one multitasking controller communicates with these devices by toggling screens on the controller. Featuring a backlit display and improved functionalities, the new PE953 MultiWave controller replaces the i-wave PE950 controller.
ප්රධාන ලක්ෂණ
- Water-resistant backlit display shows time of day, equipment status, and water and air temperature.
- Programs and displays all on/off schedules, thermostat settings, time of day, and variable pump speeds.
- Internal memory backup retains communication link during power outages.
- Ability to copy programming to additional remote controls.
- Uses three AA batteries (included).
නිෂ්පාදන රූපය
An image of the Intermatic PE953 MULTIWAVE Wireless Remote Control, showcasing ඒක සුදු casing and blue display area with numbered buttons.
සැකසුම සහ ස්ථාපනය
This section details the initial setup and installation of your Intermatic PE953 MULTIWAVE Wireless Remote Control.
අසුරනවා
ඇසුරුම්කරණයෙන් සියලුම සංරචක ප්රවේශමෙන් ඉවත් කරන්න. පහත අයිතම එහි ඇති බවට වග බලා ගන්න:
- Intermatic PE953 MULTIWAVE Wireless Remote Control
- 3 AA බැටරි (ඇතුළත්)
- සවිකරන වරහන
- Dummy Cap
බැටරි ස්ථාපනය
The PE953 requires 3 AA batteries for operation. Locate the battery compartment on the back of the remote and insert the batteries, observing the correct polarity.
Antenna Connection (for improved reception)
For optimal wireless reception, an external antenna connection using a Cat5 cable can be utilized. Follow these steps:
- Remove the Antenna Cover: Carefully remove the two small screws securing the antenna cover on the top of the PE953 unit. Lift the cover to expose the internal antenna board.
- Connect Cat5 Cable to Antenna Board: Take one end of a standard Cat5 cable (readily available from electronics or hardware stores) and plug it into the designated port on the antenna board. Ensure it clicks securely into place.
- Connect Cat5 Cable to PE953 Unit: Plug the other end of the Cat5 cable into the corresponding port on the top of the main PE953 unit.
- Mount the Dummy Cap: The system includes a dummy cap and a mounting bracket. The mounting bracket can be oriented vertically or horizontally using the arrows as a guide. Once the desired location is chosen and the bracket is mounted, attach the antenna board (with the Cat5 cable connected) to the mounting bracket.
- Reattach Dummy Cap: Securely reattach the dummy cap to the top of the PE953 unit, ensuring it is pressed down tightly for weatherproofing. Reinsert the two small screws to fasten it.
Video: Improving Wireless Reception
This video demonstrates the process of connecting an external Cat5 cable to improve wireless reception for the Intermatic PE953 MultiWave Wireless Remote. It shows how to access the antenna board, connect the cable, and reassemble the unit with the dummy cap.
මෙහෙයුම
The PE953 MULTIWAVE controller is designed for multi-tasking, allowing communication with various devices such as the PE650, PE653, and Z-Wave compatible transceiver devices. The backlit display provides real-time information.
තොරතුරු පෙන්වන්න
The water-resistant backlit display shows:
- දවසේ වේලාව
- උපකරණ තත්ත්වය
- ජල උෂ්ණත්වය
- වායු උෂ්ණත්වය
වැඩසටහන්කරණ කාර්යයන්
The controller allows you to program and display:
- All on/off schedules
- තාප ස්ථාය සැකසුම්
- දවසේ වේලාව
- Variable pump speeds
මතක උපස්ථ
An internal memory backup feature ensures that the communication link is retained even during power outages, preventing loss of settings.
Copying Programming
Programming can be copied from one PE953 remote control to additional units, simplifying setup for multiple controllers.
නඩත්තු කිරීම
Regular maintenance ensures the longevity and optimal performance of your PE953 MULTIWAVE Wireless Remote Control.
බැටරි ප්රතිස්ථාපනය
When the display indicates low battery or the remote's performance degrades, replace the 3 AA batteries. Always use fresh alkaline batteries for best results.
පිරිසිදු කිරීම
දුරස්ථ පාලකය මෘදු, d තුණ්ඩයකින් පිස දමන්න.amp රෙදි. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්රාවක භාවිතා නොකරන්න, මන්ද මේවා සංදර්ශකයට හෝ සී වලට හානි කළ හැකිය.asing. The unit is water-resistant, but avoid submerging it.
ගබඩා කිරීම
If storing the remote for an extended period, remove the batteries to prevent leakage and potential damage to the device.
දෝෂගවේෂණය
This section provides solutions to common issues you might encounter with your PE953 MULTIWAVE Wireless Remote Control.
No Display or Unresponsive Buttons
- බැටරි ස්ථාපනය පරීක්ෂා කර නිවැරදි ධ්රැවීයතාව සහතික කරන්න.
- බැටරි නැවුම් ඒවා සමඟ ප්රතිස්ථාපනය කරන්න.
- Ensure the remote is within range of the main control unit.
Poor Wireless Reception
- Ensure the Cat5 cable is securely connected to both the antenna board and the PE953 unit.
- Verify the external antenna (dummy cap with mounting bracket) is positioned optimally, away from large metal objects or other sources of interference.
- Consider relocating the external antenna to a higher or more open position.
Remote Not Communicating with Pool/Spa System
- Ensure the PE953 is properly paired or linked with your PE650, PE653, or Z-Wave compatible transceiver device. Refer to your main system's manual for pairing instructions.
- Check for any error messages on the PE953 display or the main control unit.
- Verify that the main control unit is powered on and functioning correctly.
පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| නිෂ්පාදකයා | අන්තර් සම්බන්ධිත |
| ආදර්ශ අංකය | PE953 |
| අයිතමයේ බර | අවුන්ස 10.4 කි |
| නිෂ්පාදන මානයන් | අඟල් 1.5 x 3.62 x 6.5 |
| බැටරි | 3 AA බැටරි (ඇතුළත්) |
| වර්ණය | සුදු |
| ද්රව්ය | තඹ |
| ඇතුළත් සංරචක | Intermatic PE953 Multiwave Wireless Remote |
වගකීම් සහ සහාය
වගකීම් තොරතුරු
The Intermatic PE953 MULTIWAVE Wireless Remote Control comes with a වසර 1ක සීමිත වගකීමක් from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For full warranty terms and conditions, please refer to the documentation included with your product or visit the official Intermatic webඅඩවිය.
පාරිභෝගික සහාය
For technical assistance, troubleshooting, or warranty claims, please contact Intermatic customer support. Contact information can be found on the official Intermatic webඅඩවියේ හෝ ඔබේ නිෂ්පාදන ඇසුරුම්වල.
