පැරඩොක්ස් DCTXP2/86 රේඩියෝ චුම්බක සම්බන්ධතා පරිශීලක අත්පොත

හැඳින්වීම

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the Paradox DCTXP2/86 868 MHz Radio Magnetic Contact. This device is designed to enhance the security of your premises by detecting the opening and closing of doors and windows. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

නිෂ්පාදනය අවසන්view

The Paradox DCTXP2/86 is a supervised radio magnetic contact operating at 868 MHz, specifically designed for doors and windows. It features two independent radio channels and the capability to connect one external sensor. An anti-tamper switch is integrated for enhanced security.

• සංඛ්යාතය: 868 MHz version.
• නාලිකා: Two independent radio channels.
• බාහිර සංවේදකය: Possibility to connect one external sensor.
• Tamper ආරක්ෂාව: Includes an anti-tamper ස්විචය.
• අනුකූලතාව: Conforms to EN50131-2-6 Grade 2.

The image displays the Paradox DCTXP2/86 radio magnetic contact. It consists of two main components: a larger rectangular sensor unit and a smaller rectangular magnet. Both components are white and designed to be mounted on a door or window frame and its corresponding moving part.

සැකසුම සහ ස්ථාපනය

1. බැටරි ස්ථාපනය

The DCTXP2/86 requires two AAA alkaline batteries for operation. Ensure correct polarity when inserting the batteries.

1. c එක පරිස්සමෙන් විවෘත කරන්න.asinප්‍රධාන සංවේදක ඒකකයේ g.
2. Insert two AAA alkaline batteries into the designated battery compartment, observing the polarity markings (+/-).
3. c වසා දමන්නasing ආරක්ෂිතව.

2. Mounting the Contact

The magnetic contact consists of two parts: the main sensor unit and the magnet. They should be mounted on the door/window frame and the moving part (door/window) respectively, ensuring they are aligned and in close proximity when the door/window is closed.

• Choose a mounting location where the sensor and magnet can be securely attached and are not easily accessible to intruders.
• Mount the larger sensor unit on the fixed frame of the door or window.
• Mount the smaller magnet on the moving part of the door or window, directly opposite the sensor unit.
• Ensure the gap between the sensor and the magnet is minimal (typically less than 1 cm) when the door/window is closed for reliable detection.
• Use screws or strong adhesive pads (not included) for secure mounting.

3. Programming/Pairing with Alarm System

The DCTXP2/86 needs to be programmed into your Paradox alarm system. Refer to your alarm system's main control panel manual for specific instructions on adding wireless zones. The DCTXP2/86 offers two independent radio channels that can be assigned to different zones.

• Access the programming mode of your Paradox alarm control panel.
• Select the option to add a new wireless zone or device.
• Activate the DCTXP2/86 (e.g., by opening and closing the contact, or by triggering the tamper switch) to transmit its unique serial number to the control panel.
• Assign the contact to the desired zone(s) and configure its attributes (e.g., entry/exit, perimeter, 24-hour).
• Test the communication and detection by opening and closing the protected door/window.

මෙහෙයුම් උපදෙස්

Once properly installed and programmed, the Paradox DCTXP2/86 operates automatically. When the protected door or window is opened, the magnetic contact separates, triggering an alarm signal to the control panel. When the door or window is closed, the contact re-establishes, and the zone returns to a normal state.

• හඳුනාගැනීම: The sensor detects the separation of the magnet from the main unit.
• අධීක්ෂණය: The DCTXP2/86 is a supervised device, meaning it periodically communicates with the control panel to confirm its presence and operational status. If communication is lost, the control panel will indicate a fault.
• Tamper ආරක්ෂාව: සී නම්asing of the main sensor unit is opened, the integrated tamper switch will trigger an alarm, even if the system is disarmed.
• බාහිර සංවේදක ආදානය: The two independent radio channels allow for monitoring of the magnetic contact itself and an additional wired sensor connected to the DCTXP2/86's input terminals.

නඩත්තු කිරීම

බැටරි ප්රතිස්ථාපනය

The control panel will typically indicate a low battery condition for the DCTXP2/86. Replace batteries promptly to ensure continuous protection.

1. Disarm your alarm system before replacing batteries to avoid false alarms.
2. ඇ විවෘත කරන්නasinප්‍රධාන සංවේදක ඒකකයේ g.
3. පැරණි AAA බැටරි ඉවත් කරන්න.
4. Insert new AAA alkaline batteries, ensuring correct polarity.
5. c වසා දමන්නasing securely. The tamper switch will activate briefly, and the device will re-establish communication with the control panel.

පිරිසිදු කිරීම

Clean the device periodically with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the casing or internal components. Ensure the sensor and magnet surfaces are free from dirt or debris that could interfere with their operation.

දෝෂගවේෂණය

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Paradox technical support or a certified alarm system installer.

පිරිවිතර

වගකීම් සහ සහාය

For information regarding the warranty of your Paradox DCTXP2/86, please refer to the warranty card included with your product or visit the official Paradox webවෙබ් අඩවිය. වගකීම් නියමයන් සහ කොන්දේසි කලාපය අනුව වෙනස් විය හැකිය.

If you require technical assistance, support, or have questions about your device, please contact your authorized Paradox dealer or Paradox customer support. Contact information can typically be found on the Paradox webවෙබ් අඩවියේ හෝ ඔබේ නිෂ්පාදන ලියකියවිලිවල.

It is recommended that installation and maintenance of security system components be performed by qualified professionals.