1. හැඳින්වීම
The LanParte Wireless LANC Remote Control (Model LRC-02) provides comprehensive wireless control for Panasonic GH4, GH5, and other cameras utilizing the LANC protocol. This device allows users to remotely manage video recording, photo capture, and zoom functions, enhancing operational flexibility during shoots.
2. පැකේජ අන්තර්ගතය
පහත ලැයිස්තුගත කර ඇති සියලුම අයිතම ඔබේ පැකේජයට ඇතුළත් කර ඇති බව තහවුරු කරගන්න:
- රැහැන් රහිත දුරස්ථ සම්ප්රේෂකය
- රැහැන් රහිත ග්රාහකයා
- 2.5mm to 2.5mm LANC Connection Cable
- Hot Shoe Adapter Screw
- කුඩා ඉස්කුරුප්පු නියනක් (බැටරි මැදිරිය සඳහා)
Image: All components of the LanParte Wireless LANC Remote Control system, including the transmitter, receiver, cable, hot shoe adapter, and screwdriver.
3. නිෂ්පාදන අවසන්view
3.1. සම්ප්රේෂකය
The transmitter features several buttons for controlling camera functions:
- ඡායාරූප බොත්තම: Press to capture a still image.
- W/T Buttons: Control zoom functions (Wide and Telephoto) when using compatible power zoom lenses.
- Cam Power Button: Intended to power the camera on/off. Note: Functionality may vary by camera model.
- START/STOP බොත්තම: Initiates and terminates video recording.
3.2. ග්රාහකයා
The receiver connects to your camera and communicates wirelessly with the transmitter:
- 2.5mm LANC Port: Connects to the camera's LANC input using the provided cable.
- දර්ශක ආලෝකය: Provides status feedback (e.g., power, connection status).
- සවිකරන නූල්: Allows attachment to a hot shoe or other mounting points using the adapter screw.
Image: The LanParte wireless remote transmitter and receiver, connected by the 2.5mm LANC cable.
4. පිහිටුවීම
4.1. සම්ප්රේෂක බැටරි ස්ථාපනය
- Locate the battery compartment on the back of the transmitter.
- බැටරි මැදිරි කවරය විවෘත කිරීමට සපයා ඇති කුඩා ඉස්කුරුප්පු නියනක් භාවිතා කරන්න.
- Insert a CR2032 coin cell battery, ensuring correct polarity (+/-).
- බැටරි මැදිරි ආවරණය ආරක්ෂිතව වසා දමන්න.
4.2. Receiver Connection and Mounting
- Connect one end of the 2.5mm LANC connection cable to the receiver's 2.5mm port.
- Connect the other end of the cable to the LANC input port on your Panasonic GH4, GH5, or compatible camera.
- Attach the hot shoe adapter screw to the receiver's mounting thread.
- Slide the receiver onto your camera's hot shoe and tighten the adapter screw to secure it.
Image: A user holding the LanParte remote transmitter, with the receiver connected to a Panasonic GH5 camera via cable.
5. මෙහෙයුම් උපදෙස්
Ensure both the camera and the remote control system are powered on before operation.
- Power On/Off Camera: ඔබන්න කැම් පවර් button on the transmitter. Note that this function's compatibility can vary by camera model.
- වීඩියෝ පටිගත කිරීම ආරම්භ කරන්න/නවත්වන්න: ඔබන්න START/STOP button to begin recording. Press it again to stop recording.
- ඡායාරූපය ගන්න: ඔබන්න ඡායාරූපය button to take a still photograph.
- විශාලන පාලනය: If using a power zoom lens, press the W button to zoom out (Wide) and the T button to zoom in (Telephoto).
6. නඩත්තු කිරීම
- Keep the remote control and receiver clean and dry. Use a soft, dry cloth for cleaning.
- උපාංගය අධික උෂ්ණත්වයට, තෙතමනයට හෝ සෘජු හිරු එළියට නිරාවරණය කිරීමෙන් වළකින්න.
- When not in use for extended periods, consider removing the battery from the transmitter to prevent leakage.
- Store the device in a protective case to prevent physical damage.
7. දෝශ නිරාකරණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| දුරස්ථ පාලකය ප්රතිචාර නොදක්වයි. | Low or dead transmitter battery. Receiver not powered or connected. Out of range. | Replace transmitter battery. Ensure receiver is properly connected to camera's LANC port. Move closer to the receiver. |
| Cam Power button does not work. | Camera model does not support remote power control via LANC. | This is a camera-specific limitation. Manually power on/off the camera. |
| Zoom function not working. | Non-power zoom lens attached. Power zoom function disabled in camera settings. | Ensure a compatible power zoom lens is used. Check camera settings to enable power zoom control. |
| Recording/Photo not activating. | Incorrect camera mode. Loose cable connection. | Set camera to appropriate video or photo mode. Verify the LANC cable is securely connected to both receiver and camera. |
8. පිරිවිතර
- ආදර්ශ අංකය: LRC-02
- වෙළඳ නාමය: LanParte
- අයිතමයේ බර: අවුන්ස 8.3 කි
- සම්බන්ධතා තාක්ෂණය: Wireless (Infrared, based on product description)
- ගැළපෙන උපාංග: Cameras (specifically Panasonic GH4, GH5, and LANC protocol cameras)
- උපරිම සහාය දක්වන උපාංග ගණන: 1 (one receiver per camera)
- විශේෂ ලක්ෂණය: Ergonomic නිර්මාණය
9. වගකීම් සහ සහාය
LanParte products are typically covered by a limited manufacturer's warranty. For specific warranty details, duration, and terms, please refer to the documentation provided with your purchase or visit the official LanParte webඅඩවිය.
For technical support, troubleshooting assistance, or service inquiries, please contact LanParte customer support directly through their official channels. Provide your product model number (LRC-02) and purchase information when seeking support.