iDIGMALL Bluetooth 5.0 Transmitter Receiver (Model BTI-018) User Manual

හැඳින්වීම

The iDIGMALL BTI-018 is a versatile 2-in-1 Bluetooth 5.0 audio adapter designed to function as both a transmitter (TX) and a receiver (RX). This device allows you to wirelessly stream audio from non-Bluetooth devices to Bluetooth headphones or speakers, or to receive Bluetooth audio from your smartphone or tablet and output it to wired speakers or car stereos. Featuring aptX Low Latency technology, it minimizes audio delay for a synchronized listening experience.

Image: The iDIGMALL BTI-018 Bluetooth 5.0 Transmitter Receiver.

පැකේජයේ අන්තර්ගතය

කරුණාකර පහත අයිතම සඳහා පැකේජය පරීක්ෂා කරන්න:

• iDIGMALL BTI-018 Bluetooth 5.0 Transmitter Receiver
• Micro USB Charging Cable
• 3.5mm ශ්රව්ය කේබල්
• RCA ශ්‍රව්‍ය කේබලය
• පරිශීලක අත්පොත

Image: The iDIGMALL BTI-018 device, 3.5mm audio cable, and RCA audio cable.

නිෂ්පාදන විශේෂාංග

• බ්ලූටූත් 5.0 තාක්ෂණය: Ensures stable connection and wide compatibility.
• 2-in-1 ක්‍රියාකාරීත්වය: Easily switch between Transmitter (TX) and Receiver (RX) modes.
• aptX Low Latency: Reduces audio delay to approximately 40ms, providing a synchronized audio-visual experience.
• Dual Stream Support: In TX mode, connect two Bluetooth headphones or speakers simultaneously.
• ස්වයංක්‍රීය නැවත සම්බන්ධ කිරීම: Automatically pairs with the last connected device upon power-on.
• දිගු බැටරි ආයු කාලය: Up to 16 hours of operating time on a single charge.
• සංයුක්ත නිර්මාණය: Small, lightweight, and portable.

උපාංගය අවසන්view

Familiarize yourself with the buttons and ports on your iDIGMALL BTI-018:

Image: The iDIGMALL BTI-018 showing the Multi-Function & Power Button, LED Light Indicator, Micro USB Charging Port, and 3.5mm Aux In / Out. The TX/RX mode switch is also visible.

• Multi-Function & Power Button: Used for power on/off, play/pause, and pairing.
• LED ආලෝක දර්ශකය: උපාංග තත්ත්වය පෙන්වයි (යුගලනය, සම්බන්ධ කිරීම, ආරෝපණය කිරීම).
• Micro USB Charging Port: අභ්‍යන්තර බැටරිය ආරෝපණය කිරීම සඳහා.
• 3.5mm Aux In / Out: Audio input/output port.
• TX/RX ස්විචය: Slides to select Transmitter or Receiver mode.

සැකසුම සහ මෙහෙයුම්

1. උපාංගය ආරෝපණය කිරීම

1. Connect the Micro USB charging cable to the device's Micro USB port.
2. Connect the other end of the USB cable to a USB power adapter (DC 5V) or a computer's USB port.
3. The LED indicator will show red during charging and turn off when fully charged. A full charge typically takes about 2 hours.
4. ආරෝපණය කිරීමේදී උපාංගය භාවිතා කළ හැකිය.

Image: The iDIGMALL BTI-018 offers up to 14 hours of working time and can be used while charging.

2. සම්ප්‍රේෂක (TX) මාදිලිය

In TX mode, the BTI-018 transmits audio from a non-Bluetooth device (e.g., TV, PC, MP3 player) to Bluetooth headphones or speakers.

Image: Diagram illustrating the iDIGMALL BTI-018 in TX (Transmitter) Mode, connecting to TV, PC, or Music Player and transmitting to Bluetooth speakers or headphones.

1. TX මාදිලියට මාරු වන්න: TX/RX ස්විචය "TX" ස්ථානයට තල්ලු කරන්න.
2. ශ්‍රව්‍ය මූලාශ්‍රය සම්බන්ධ කරන්න: Use the 3.5mm audio cable or RCA cable to connect the BTI-018's 3.5mm Aux port to the audio output port of your non-Bluetooth device (e.g., TV headphone jack, PC audio out).
3. බල ගැන්වීම: Press and hold the Multi-Function button for 3 seconds to power on the device. The LED will flash blue rapidly, indicating it's in pairing mode.
4. බ්ලූටූත් උපාංගය සමඟ යුගල කරන්න: Put your Bluetooth headphones or speaker into pairing mode. Place them close to the BTI-018.
5. සම්බන්ධතාවය: The BTI-018 will automatically search and connect to your Bluetooth device. Once connected, the LED will turn solid blue.
6. Dual Headphone Pairing (Optional): To connect a second pair of Bluetooth headphones, put the second headphones into pairing mode. Then, double-press the Multi-Function button on the BTI-018. The LED will flash blue rapidly again, and it will connect to the second device. Both devices will then receive audio simultaneously.

Image: The iDIGMALL BTI-018 in TX Mode, demonstrating the ability to pair with two headphones simultaneously for shared listening.

3. ග්‍රාහක (RX) මාදිලිය

In RX mode, the BTI-018 receives Bluetooth audio from your smartphone or tablet and outputs it to wired speakers, car stereos, or wired headphones.

Image: Diagram illustrating the iDIGMALL BTI-018 in RX (Receiver) Mode, receiving audio from smartphones, laptops, or tablets and connecting to home stereo, car stereo, or wired headphones.

1. RX මාදිලියට මාරු වන්න: TX/RX ස්විචය "RX" ස්ථානයට තල්ලු කරන්න.
2. ශ්‍රව්‍ය ප්‍රතිදානය සම්බන්ධ කරන්න: Use the 3.5mm audio cable or RCA cable to connect the BTI-018's 3.5mm Aux port to the audio input port of your wired audio device (e.g., home stereo AUX-in, car stereo AUX-in, wired headphones).
3. බල ගැන්වීම: Press and hold the Multi-Function button for 3 seconds to power on the device. The LED will flash blue rapidly, indicating it's in pairing mode.
4. ස්මාර්ට් ජංගම දුරකථනය/ටැබ්ලටය සමඟ යුගල කරන්න: On your smartphone or tablet, enable Bluetooth and search for new devices. Select "BTI-018" from the list of available devices.
5. සම්බන්ධතාවය: Once connected, the LED will turn solid blue. You can now play audio from your smartphone/tablet through the connected wired audio device.

නඩත්තු කිරීම

• පිරිසිදු කිරීම: Wipe the device with a soft, dry cloth. Do not use liquid cleaners or solvents.
• ගබඩා: උපාංගය සෘජු හිරු එළියෙන් සහ අධික උෂ්ණත්වයන්ගෙන් ඈත්ව සිසිල් වියළි ස්ථානයක ගබඩා කරන්න.
• බැටරි සත්කාර: To prolong battery life, charge the device fully before first use and at least once every three months if not used regularly. Avoid fully discharging the battery frequently.
• ජලයෙන් වළකින්න: මෙම උපාංගය ජල ආරක්ෂිත නොවේ. එය ජලයෙන් හා තෙතමනයෙන් ඈත් කර තබන්න.

දෝෂගවේෂණය

No Sound / Poor Sound Quality:

• සියලුම ශ්‍රව්‍ය කේබල් ආරක්ෂිතව සම්බන්ධ වී ඇති බවට වග බලා ගන්න.
• Check the volume levels on both the BTI-018 and the connected audio devices.
• Verify that the BTI-018 is in the correct mode (TX for transmitting, RX for receiving).
• Ensure the connected Bluetooth device (headphones/speaker) is powered on and paired correctly.
• Move the BTI-018 closer to the connected Bluetooth device to reduce interference.

බ්ලූටූත් උපාංගය සමඟ යුගල කළ නොහැක:

• Ensure the BTI-018 is in pairing mode (rapidly flashing blue LED).
• Make sure your Bluetooth device is also in pairing mode.
• Turn off and restart both the BTI-018 and your Bluetooth device.
• ඔබගේ බ්ලූටූත් උපාංගයේ පෙර යුගල කිරීමේ වාර්තා හිස් කර නැවත යුගල කිරීමට උත්සාහ කරන්න.
• යුගල කිරීමේ ක්‍රියාවලියට වෙනත් කිසිදු බ්ලූටූත් උපාංගයක් බාධා නොකරන බවට වග බලා ගන්න.

Audio Delay (Lip-Sync Issue):

• Ensure both the BTI-018 and your connected Bluetooth headphones/speaker support aptX Low Latency. If only one device supports it, the low latency feature will not be active.
• Some devices may have slight delays even with aptX LL. Try restarting both devices.

Short Bluetooth Range:

• Bluetooth range can be affected by obstacles (walls, furniture) and interference from other wireless devices.
• Ensure there are no major obstructions between the BTI-018 and the connected Bluetooth device.
• Avoid placing the device near Wi-Fi routers, microwaves, or other strong signal sources.

පිරිවිතර

Image: The iDIGMALL BTI-018 showing its compact size with a diameter of 4.9cm, height of 1.3cm, and net weight of 21g.

වගකීම් සහ සහාය

iDIGMALL products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your purchase or contact iDIGMALL customer support.

If you encounter any issues or have questions regarding your iDIGMALL BTI-018, please visit the official iDIGMALL website or contact their customer service for assistance. Always provide your product model number (BTI-018) when seeking support.