Waytronic Powersound V1 PIR Motion Sensor Voice Programmable Speaker User Manual

හැඳින්වීම

This manual provides detailed instructions for the installation, operation, and maintenance of your Waytronic Powersound V1 PIR Motion Sensor Voice Programmable Speaker. Please read this manual thoroughly before using the device to ensure proper function and safety.

ආරක්ෂිත තොරතුරු

• Ensure the power supply matches the device's requirements (DC12V).
• මෙම උපාංගය වේ ජල ආරක්ෂිත නොවේ. Avoid exposure to rain, moisture, or any liquids.
• උපාංගය ඔබම විසුරුවා හැරීමට හෝ අලුත්වැඩියා කිරීමට උත්සාහ නොකරන්න. සියලුම සේවා සුදුසුකම් ලත් පුද්ගලයින් වෙත යොමු කරන්න.
• උපාංගය අධික උෂ්ණත්වයන්ගෙන් සහ සෘජු හිරු එළියෙන් ඈත් කරන්න.
• Install the device securely to prevent it from falling.

නිෂ්පාදනය අවසන්view

The Waytronic Powersound V1 is a wall-mountable PIR motion sensor speaker designed to play custom audio files upon motion detection. It features a sensitive sensor, a built-in 10W loudspeaker, and supports audio file updates via USB or SD card.

Figure 1: Waytronic Powersound V1 PIR Motion Sensor Speaker with included power adapter.

සංරචක සහ විශේෂාංග:

• PIR චලන සංවේදකය: Detects movement within approximately 16 feet (5 meters) and triggers audio playback.
• බිල්ට් ස්පීකර්: 10W loudspeaker for clear audio output.
• USB අතුරුමුහුණත: For connecting a USB flash drive to transfer audio files.
• SD කාඩ් තව්: For inserting an SD card (max 2GB) to play audio directly or transfer files.
• ශබ්ද පාලනය: Buttons for adjusting playback volume.
• පසුධාවන මාදිලි: Supports single cycle or sequential playback of audio files.

රූපය 2: පැත්ත view of the device showing the Infrared Indicator Light, SD card slot, USB interface, and control buttons (Previous/A, Next/B, Volume+/C, Volume-/L).

සැලසුම

1. උපාංගය සවි කිරීම

• The Powersound V1 is designed for wall mounting.
• Choose a location where the motion sensor has an unobstructed view of the desired detection area.
• Consider installing it on the top of a wall or discreetly behind an object like a tree in a covered outdoor area, ensuring it is protected from moisture.
• Secure the device using appropriate mounting hardware (not included).

2. බල සම්බන්ධතාවය

• Connect the provided DC12V power adapter to the device's power input port.
• Plug the power adapter into a standard electrical outlet. The device will power on automatically.

3. Customizing Audio Files

The device supports MP3 audio files. You can update audio files using either a USB flash drive or an SD card.

Figure 3: Close-up of the USB port and SD card slot for audio file කළමනාකරණය.

Using a USB Flash Drive:

1. Format your USB flash drive to FAT32. (Note: NTFS format may cause transfer issues).
2. Copy your desired MP3 audio fileUSB ෆ්ලෑෂ් ධාවකයේ මූල නාමාවලිය වෙත s.
3. Insert the USB flash drive into the USB interface on the device.
4. ඔබා අල්ලාගෙන සිටින්න V+/C button. The device should automatically begin copying files to its internal memory. The red indicator light may blink during this process.
5. Once the transfer is complete, remove the USB flash drive.

Using an SD Card:

1. Copy your desired MP3 audio files to a standard SD card (maximum 2GB).
2. Insert the SD card into the SD card slot on the device.
3. The device can play audio files directly from the SD card.

මෙහෙයුම් උපදෙස්

1. Motion Detection and Playback

• Once powered on and with audio files loaded, the device will enter standby mode.
• When the PIR motion sensor detects movement within its range (approximately 16 feet), it will trigger the playback of the stored audio files.
• The audio can be heard up to 100 feet (30 meters) away.

Figure 4: Illustration of the motion sensor detecting movement and triggering sound playback.

2. පසුධාවන ක්‍රම

The device supports two main playback modes:

• Single Cycle Playback: Plays one audio file and then stops until motion is detected again.
• Order Playback (Sequential): ශ්රව්ය උපකරණ වාදනය කරයි files in sequence. After playing the last file, it will loop back to the first.

Specific instructions for switching between these modes are typically found in the device's internal programming or may be controlled by the order of files on the SD card/USB drive. Refer to the manufacturer's specific guidance if available.

3. පරිමාව ගැලපීම

• භාවිතා කරන්න V+/C ශබ්දය වැඩි කිරීමට බොත්තම.
• භාවිතා කරන්න V-/L ශබ්දය අඩු කිරීමට බොත්තම.
• The device offers multiple volume levels.

නඩත්තු කිරීම

• පිරිසිදු කිරීම: මෘදු වියළි රෙද්දකින් උපාංගය පිස දමන්න. දියර පිරිසිදු කරන්නන් හෝ උල්ෙල්ඛ ද්‍රව්‍ය භාවිතා නොකරන්න.
• ගබඩා: දිගු කාලයක් භාවිතයේ නොමැති විට, බල ඇඩැප්ටරය විසන්ධි කර උපාංගය සිසිල් වියළි ස්ථානයක ගබඩා කරන්න.
• පාරිසරික ආරක්ෂාව: As the device is not waterproof, ensure it is always protected from rain and high humidity, especially if used in outdoor settings.

දෝෂගවේෂණය

පිරිවිතර

වගකීම් සහ සහාය

වගකීම් තොරතුරු

The Waytronic Powersound V1 comes with a සම්පූර්ණ වගකීම. For specific terms and conditions, please refer to the warranty card included with your product or contact Waytronic customer service.

පාරිභෝගික සහාය

If you encounter any issues or have questions not covered in this manual, please contact Waytronic customer service. You can often find contact information on the product packaging, the official Waytronic webඅඩවිය, හෝ ඔබේ මිලදී ගැනීමේ වේදිකාව හරහා.

When contacting support, please have your product model (Powersound V1) and purchase details ready.