VEVOR PA250 Electric Hoist පරිශීලක අත්පොත

1. හැඳින්වීම

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your VEVOR PA250 Electric Hoist. Please read and understand all instructions before using the product. Keep this manual for future reference.

Figure 1: VEVOR PA250 Electric Hoist with key dimensions (Length: 13.5", Width: 5.5", Height: 7.8"). This image shows the overall structure of the hoist, including the motor, cable drum, hook, and remote control.

2. ආරක්ෂිත උපදෙස්

Always prioritize safety when operating the electric hoist. Failure to follow these instructions may result in serious injury or property damage.

• අත්පොත කියවන්න: Ensure all operators have read and understood this manual before use.
• බර සීමාවන්: Never exceed the rated lifting capacity of the hoist (125 kg / 275 lbs for single line, 250 kg / 550 lbs for double line with pulley hook).
• පරීක්ෂාව: Before each use, inspect the hoist, cable, hook, and mounting for any signs of wear, damage, or malfunction. Do not use if damaged.
• ස්ථාවර සවි කිරීම: Ensure the hoist is securely mounted to a structure capable of supporting the hoist's weight plus the maximum load.
• පැහැදිලි කලාපය: Keep the lifting area clear of personnel and obstructions. Never lift loads over people.
• Balanced Load: බර එසවීමට පෙර එය නිසි ලෙස සමතුලිත කර ආරක්ෂිතව තබා ගන්න.
• බල සැපයුම: Connect the hoist to a grounded power outlet with the correct voltage (වෝල්ට් 220) සහ සංඛ්‍යාතය.
• හදිසි නැවතුම: Familiarize yourself with the emergency stop procedure.
• Avoid Side Pulling: Do not use the hoist for side pulling or dragging loads. Lift vertically only.
• පාරිසරික තත්ත්වයන්: Do not operate the hoist in hazardous environments, such as those with explosive atmospheres or excessive moisture.

3. නිෂ්පාදන අවසන්view

The VEVOR PA250 Electric Hoist is designed for efficient and reliable lifting operations in various settings.

3.1 ප්‍රධාන සංරචක සහ විශේෂාංග

• Full Copper Motor: Equipped with a robust copper wire motor for enhanced durability and performance.

Figure 2: Detail of the hoist's motor, highlighting its full copper winding for improved efficiency and lifespan.
• High-Efficient Lifting: Offers versatile lifting capacities depending on the configuration.


Figure 3: Illustration of the hoist's lifting capabilities: 275 lbs (125 kg) with a single line and 550 lbs (250 kg) with a double line using the pulley hook.

• Durable Pulley Hook & Cable: Features a strong steel cable and a robust hook, with an additional pulley hook for increased capacity.


රූපය 4: සවිස්තරාත්මක view of the heavy-duty pulley hook and the durable steel cable, essential for secure lifting operations.

• දුරස්ථ පාලක: Wired remote control for safe operation from a distance, featuring intuitive 'UP' and 'DOWN' buttons.

Figure 5: The wired remote control unit, showing the 'UP' and 'DOWN' buttons for precise load manipulation.
• සීමාව මාරු කරන්න: Integrated safety limit switch to prevent over-lifting or over-lowering, protecting the hoist and the load.


Figure 6: The limit switch, a crucial safety feature that automatically stops the hoist when the hook reaches its upper or lower travel limits.

4. පිහිටුවීම සහ ස්ථාපනය

Proper installation is crucial for the safe and effective operation of your electric hoist.

4.1 දොඹකරය සවි කිරීම

1. ස්ථානය තෝරන්න: Choose a mounting location that is structurally sound and capable of supporting at least 1.5 times the maximum rated load of the hoist.
2. සවිකරන වරහන්: Securely attach the hoist's mounting brackets to a suitable beam or support structure using appropriate hardware (not included). Ensure all bolts are tightened to the manufacturer's specifications.
3. නිෂ්කාශනය: Ensure there is adequate clearance around the hoist for operation and maintenance, and that the cable can move freely without obstruction.

4.2 විදුලි සම්බන්ධතාවය

1. බල අවශ්යතා: Verify that your power supply matches the hoist's requirements (220 Volts, 500 Watts).
2. බිම් අලෙවිසැල: Plug the hoist into a properly grounded electrical outlet. Do not use extension cords unless absolutely necessary and ensure they are rated for the hoist's power requirements.
3. කේබල් කළමනාකරණය: Route the power cable and remote control cable to prevent entanglement or damage during operation.

4.3 Pulley Hook Installation (for Double Line Operation)

To achieve the maximum lifting capacity (250 kg / 550 lbs), install the pulley hook:

1. Loop the steel cable through the pulley wheel of the auxiliary hook.
2. Attach the end of the cable back to the hoist body at the designated anchor point.
3. Ensure the cable is seated correctly in all grooves and the hook is free to move.

5. මෙහෙයුම් උපදෙස්

Follow these steps for safe and effective operation of your VEVOR PA250 Electric Hoist.

1. පූර්ව මෙහෙයුම් පරීක්ෂාව: Before each use, perform a visual inspection of the hoist, cable, hooks, and mounting points for any damage or wear.
2. පැටවීම සුරක්ෂිත කරන්න: Attach the load securely to the hook. Ensure the load is balanced and the hook's safety latch is closed. For double line operation, ensure the pulley hook is correctly installed.
3. ඔබම ස්ථානගත කරන්න: Stand at a safe distance from the load and the hoist, ensuring a clear view of the lifting area.
4. බර ඔසවන්න: Press the 'UP' button on the remote control to slowly raise the load. Observe the load's stability. If the load swings or is unbalanced, lower it and re-secure it.
5. බර අඩු කරන්න: Press the 'DOWN' button to slowly lower the load. Guide the load if necessary, but never use your hands directly on the load while it is moving.
6. Limit Switch Activation: The hoist will automatically stop if the limit switch is activated (e.g., when the hook reaches its highest or lowest point). Do not attempt to override this safety feature.
7. මෙහෙයුමෙන් පසු: Once the task is complete, lower the hook to a safe position, disconnect the power, and store the remote control safely.

6. නඩත්තු කිරීම

Regular maintenance ensures the longevity and safe operation of your hoist.

• දෛනික පරීක්ෂාව: Visually inspect the cable for fraying, kinks, or corrosion. Check the hook for deformation or cracks. Ensure all fasteners are tight.
• Cable Lubrication: Periodically lubricate the steel cable according to the manufacturer's recommendations to prevent rust and wear.
• පිරිසිදු කිරීම: Keep the hoist body clean and free of dust, dirt, and debris. Do not use high-pressure water or solvents that could damage electrical components.
• මෝටර් වාතාශ්රය: Ensure the motor's ventilation openings are clear to prevent overheating.
• වෘත්තීය සේවය: For any complex repairs or internal component issues, contact qualified service personnel.

7. දෝශ නිරාකරණය

This section addresses common issues you might encounter with your electric hoist.

8. පිරිවිතර

Technical details for the VEVOR PA250 Electric Hoist.

රූපය 7: උදාamples of typical environments where the VEVOR electric hoist can be effectively used, including workshops, garages, and industrial settings.

9. වගකීම් සහ සහාය

For warranty information, technical support, or to inquire about replacement parts, please contact VEVOR customer service through their official webභාණ්ඩය මිලදී ගත් ස්ථානය හෝ සිල්ලර වෙළෙන්දා. මිලදී ගත් බවට සාක්ෂියක් ලෙස ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.