Milesight MS-C2972-FIPB
Milesight MS-C2972-FIPB 2MP Pro Dome IP ජාල කැමරා පරිශීලක අත්පොත
Model: MS-C2972-FIPB
නිෂ්පාදනය අවසන්view
The Milesight MS-C2972-FIPB is a 2MP Pro Dome IP Day/Night Network Camera designed for robust surveillance applications. It features remote focus and zoom capabilities, an IK10 vandal-proof and IP66 weather-resistant casing, and advanced imaging technologies like 140 dB WDR (Wide Dynamic Range) and Smart IR II for superior image quality in varying light conditions.
This camera supports H.265 video compression for efficient storage and bandwidth usage, and includes a 256GB MicroSD card slot for on-board storage. It is fully ONVIF compliant, ensuring broad compatibility with various network video recorders (NVRs) and video management systems (VMS).
ප්රධාන ලක්ෂණ
- Motorized Zoom and Focus: Allows for remote adjustment of the camera's field of view සහ තියුණු බව.
- IK10 Vandal-proof & IP66 Weather-resistant: Ensures durability and protection against impact and harsh environmental conditions, suitable for outdoor use.
- 140 dB WDR: Provides clear images in scenes with strong contrast, such as bright backlighting.
- Smart IR II: Advanced infrared technology for uniform illumination in low-light conditions, preventing overexposure of close objects.
- H.265+ සම්පීඩනය: Reduces bandwidth and storage requirements significantly compared to older compression standards.
- 256GB MicroSD Support: Enables on-board storage for local recording and redundancy.
- Full ONVIF Compliance: Ensures interoperability with a wide range of surveillance equipment.
- SIP/VoIP Support: Integrates voice and video over IP for enhanced communication capabilities.
සැකසුම සහ ස්ථාපනය
පැකේජයේ අන්තර්ගතය
ස්ථාපනය ආරම්භ කිරීමට පෙර, සියලුම සංරචක පවතින බවට වග බලා ගන්න:
- Milesight MS-C2972-FIPB IP Camera
- සවිකරන අච්චුව
- සවි කරන ඉස්කුරුප්පු සහ බිත්ති ප්ලග්
- ඊතර්නෙට් කේබලය සඳහා ජල ආරක්ෂිත සම්බන්ධකය
- ඉක්මන් ආරම්භක මාර්ගෝපදේශය
කැමරාව සවි කිරීම
The MS-C2972-FIPB is designed for ceiling mount installation. Follow these steps:
- සවි කරන මතුපිට සකස් කරන්න: Choose a suitable location on a ceiling or wall that can support the camera's weight and provides the desired field of view.
- Detach the Mounting Plate: Rotate the camera body counter-clockwise to detach it from the mounting plate. This plate will be secured to the surface first.
- විදුම් සිදුරු සලකුණු කරන්න: Use the provided mounting template to mark the positions for drilling holes on the mounting surface.
- සිදුරු සිදුරු: Drill holes according to the marked positions. Insert wall plugs if mounting on a masonry surface.
- ආරක්ෂිත සවි කිරීමේ තහඩුව: සපයා ඇති ඉස්කුරුප්පු භාවිතයෙන් සවි කිරීමේ තහඩුව මතුපිටට සවි කරන්න.
- කේබල් සම්බන්ධ කරන්න: Route the Ethernet cable through the mounting plate and connect it to the camera's RJ45 port. Ensure a waterproof connection using the supplied connector for outdoor installations. If not using PoE, connect the DC12V power supply.
- කැමරා ශරීරය අමුණන්න: Align the camera body with the mounting plate and rotate clockwise until it locks securely into place.
Network Connection and Initial Setup
The camera supports Power over Ethernet (PoE) for simplified installation, requiring only one Ethernet cable for both power and data. Alternatively, it can be powered by a 12V DC adapter.
- ජාලයට සම්බන්ධ වන්න: Connect the camera to your network switch or router using an Ethernet cable. If using PoE, ensure your switch supports PoE (802.3af).
- කැමරාව සොයා ගන්න: Use the Milesight Smart Tools software (available on the Milesight website) to discover the camera on your network.
- IP ලිපිනය පවරන්න: Assign a static IP address or configure DHCP for the camera.
- ප්රවේශය Web අතුරු මුහුණත: a විවෘත කරන්න web browser and enter the camera's IP address to access its web අතුරු මුහුණත.
- මූලික පිවිසුම: Log in using the default username and password (refer to the Quick Start Guide for default credentials). It is highly recommended to change the default password immediately for security.
- ස්ථිරාංග යාවත්කාලීන කිරීම: Check for and install any available firmware updates to ensure optimal performance and security.
කැමරාව ක්රියාත්මක කිරීම
Remote Focus and Zoom
The MS-C2972-FIPB features a motorized varifocal lens, allowing you to adjust the zoom and focus remotely from the camera's web interface or compatible NVR/VMS software. This eliminates the need for manual adjustment at the camera's physical location.
වීඩියෝ වින්යාසය
Access the "Video" settings in the web වින්යාස කිරීමට අතුරුමුහුණත:
- විභේදනය: Up to 1920x1080 (2MP).
- රාමු අනුපාතය: Adjust for desired smoothness of video.
- සම්පීඩනය: Select H.265+, H.265, H.264+, H.264, or MJPEG. H.265+ is recommended for efficiency.
- බිට් අනුපාතය: Configure constant (CBR) or variable (VBR) bit rates.
- රූප සැකසීම්: Adjust brightness, contrast, saturation, sharpness, WDR, and noise reduction.
- රහස්යතා ආවරණ: Define up to 8 areas to be masked for privacy concerns.
ශ්රව්ය වින්යාසය
The camera includes a built-in microphone and supports two-way audio via an audio output interface. Configure audio settings under the "Audio" section:
- ශ්රව්ය සම්පීඩනය: G.711, AAC, G.722, G.726.
- මයික්රෆෝන ලාභය: Adjust sensitivity of the built-in microphone.
- ද්වි-මාර්ග ශ්රව්ය: Enable and configure for interactive communication.
Storage and Recording
The camera supports local storage on a MicroSD card up to 256GB. Configure recording schedules, motion detection recording, and continuous recording options in the "Storage" settings.
SIP/VoIP Integration
The MS-C2972-FIPB supports SIP/VoIP for voice and video-over-IP functionality. This allows for integration with VoIP systems for advanced communication and monitoring. Refer to the "System" or "Network" settings for SIP/VoIP configuration.
නඩත්තු කිරීම
පිරිසිදු කිරීම
- Lens and Dome Cover: Regularly clean the camera lens and the transparent dome cover with a soft, clean cloth. For stubborn dirt, use a mild, non-abrasive cleaning solution specifically designed for optical surfaces. Avoid harsh chemicals that could damage the coating.
- කැමරා ශරීරය: දැන්වීමෙන් කැමරා ශරීරය පිස දමන්නamp දූවිලි හා දූවිලි ඉවත් කිරීමට රෙදි.
ස්ථිරාංග යාවත්කාලීන කිරීම්
Milesight නිලධාරියා වරින් වර පරීක්ෂා කරන්න website for new firmware versions. Keeping the firmware updated ensures optimal performance, introduces new features, and addresses potential security vulnerabilities.
- නවතම ස්ථිරාංග බාගන්න file from the Milesight support page.
- Access the camera's web interface and navigate to the "System" or "Maintenance" section.
- Follow the on-screen instructions to upload and install the firmware. Do not power off the camera during the update process.
පාරිසරික සලකා බැලීම්
Although the camera is IP66 rated for weather resistance, extreme conditions can still affect performance. Ensure proper drainage around the camera if installed in areas prone to heavy rain or snow accumulation. Avoid direct exposure to prolonged strong sunlight if possible, as this can affect image quality and component lifespan.
දෝෂගවේෂණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| කැමරාව ක්රියාත්මක නොවේ. | No power supply; PoE not active; faulty cable. | Check power adapter/PoE switch. Ensure Ethernet cable is properly connected and functional. |
| හරහා කැමරාවට ප්රවේශ විය නොහැක web බ්රවුසරය. | Incorrect IP address; network connectivity issue; firewall blocking. | Verify IP address. Check network cable. Temporarily disable firewall on PC. Use Milesight Smart Tools to discover camera. |
| Poor image quality (blurry, dark, overexposed). | Lens out of focus; incorrect image settings; dirty lens/dome; insufficient IR illumination. | Adjust focus remotely. Configure brightness, contrast, WDR, and IR settings. Clean lens and dome cover. |
| No video recording to MicroSD card. | MicroSD card full/faulty; recording schedule not configured; motion detection not triggered. | Check MicroSD card status and format if necessary. Verify recording schedule and motion detection settings. |
| Vandalism or physical damage. | External impact. | The camera is IK10 vandal-proof, but extreme force can still cause damage. Contact support for repair options. |
පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| ආදර්ශ අංකය | MS-C2972-FIPB |
| රූප සංවේදකය | 1/2.8" ප්රගතිශීලී ස්කෑන් CMOS |
| උපරිම. රූප විභේදනය | 1920x1080 (2MP) |
| අවම ආලෝකකරණය | Color: 0.002Lux@F1.2; B/W: 0Lux with IR on |
| කාච වර්ගය | Motorized P-IRIS varifocal 3.0~10.5mm (Optional: 2.7~13.5mm/ 7~22mm) |
| IR දුර | Up to 50m (3.0~10.5mm lens); Up to 90m (7~22mm lens) |
| වීඩියෝ සම්පීඩනය | H.265+/ H.265(HEVC)/ H.264+/ H.264/MJPEG |
| ඩබ්ලිව්ඩීආර් | 140 dB Super WDR |
| ශ්රව්ය I/O | බිල්ට් මයික්රෆෝනය සහ 1 ශ්රව්ය ප්රතිදාන අතුරුමුහුණත |
| ගබඩා කිරීම | Support micro SD/SDHC/SDXC Card, up to 256GB |
| ජාල අතුරුමුහුණත | 1*RJ45 10M/100M ඊතර්නෙට් වරාය |
| පද්ධති අනුකූලතාව | ඔන්විෆ් ප්රෝfile G&Q&S&T, API |
| බල සැපයුම | PoE (802.3af) / DC12V±10% |
| බලශක්ති පරිභෝජනය | 8W Max; 12W Max (With IR on) |
| මානයන් | Φ143mm x 108.4mm (5.63 x 4.27 x 4.27 inches) |
| බර | ආසන්න වශයෙන්. රාත්තල් 3.28 කි |
| ඇතුල්වීමේ ආරක්ෂාව | IP66 |
| වැන්ඩල් ප්රතිරෝධය | IK10 |
වගකීම් සහ සහාය
Specific warranty details for the Milesight MS-C2972-FIPB camera are typically provided at the point of purchase or can be found on the official Milesight webවෙබ් අඩවිය. වගකීම් හිමිකම් සඳහා කරුණාකර ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.
For technical support, product inquiries, or service requests, please visit the official Milesight support portal or contact their customer service. Contact information is usually available on the manufacturer's webඅඩවිය.
Note: This manual provides general guidance. For detailed technical specifications and advanced configurations, please refer to the complete product documentation available on the Milesight official webඅඩවිය.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.