LEDVANCE 65636

Sylvania 32ft RGB Flexible Light Strip Starter Kit Instruction Manual

මාදිලිය: 65636 | වෙළඳ නාමය: LEDVANCE

වැදගත් ආරක්ෂක තොරතුරු

  • ගෘහස්ථ භාවිතය පමණි: මෙම නිෂ්පාදනය වියළි ස්ථානවල ගෘහස්ථ භාවිතය සඳහා නිර්මාණය කර ඇත. ජලයට හෝ අධික ආර්ද්‍රතාවයට නිරාවරණය නොවන්න.
  • විදුලි ආරක්ෂාව: බල ඇඩැප්ටරය සුදුසු බල සැපයුමකට සම්බන්ධ කර ඇති බවට වග බලා ගන්න. විදුලි පරිපථ අධික ලෙස පටවන්න එපා.
  • කැපීමේ උපදෙස්: The LED strips can be cut for customized length. Only cut along the designated markings to avoid damaging the strip.
  • ස්ථාපනය: ස්ථාපනය කිරීමට හෝ නඩත්තු කිරීමට පෙර සෑම විටම විදුලිය විසන්ධි කරන්න.
  • තාපය: Do not cover the LED strips with materials that may trap heat, as this can cause overheating.
  • දරුවන්: නිෂ්පාදිතය සහ එහි සංරචක දරුවන්ට ළඟාවිය නොහැකි ලෙස තබා ගන්න.

පැකේජයේ අන්තර්ගතය

ඔබගේ පැකේජයේ සියලුම සංරචක ඇති බව තහවුරු කරගන්න:

  • (2) 16.4ft RGB Flexible LED Light Strips
  • (1) බල සැපයුම
  • (1) IR Remote Controller (with battery included)
  • (20) සවිකරන ක්ලිප්
Sylvania 32ft RGB Flexible Light Strip Starter Kit components

Image: Main product image showing the light strips, remote, power adapter, and clips.

සැකසුම සහ ස්ථාපනය

  1. මතුපිට සකස් කරන්න: Ensure the installation surface is clean, dry, and smooth for optimal adhesion of the clips.
  2. සංරචක සම්බන්ධ කරන්න: Connect the LED light strips to the controller, ensuring the arrows on the connectors align. Then, connect the power supply to the controller.
  3. පරීක්ෂණ ක්‍රියාකාරීත්වය: Before permanent mounting, plug in the power supply and use the remote control to test the light strips. Verify all colors and modes function correctly.
  4. Customize Length (Optional): If a shorter length is desired, only cut the LED strips along the designated cutting marks (usually indicated by a scissor icon or copper pads). Cutting elsewhere will damage the strip.
  5. Mount the Strips: Remove the adhesive outer layer from the back of the mounting clips and press firmly for five seconds when mounting. Use the provided clips to secure the light strips in your desired location, such as under cabinets, behind TVs, or along shelves.
  6. දුරස්ථ පාලකය සක්‍රිය කරන්න: Remove the plastic tab from the remote control's battery door to activate the battery.
Diagram showing connection, cutting points, and mounting of LED strips

Image: Step-by-step diagram illustrating how to connect the light strips, identify cutting points, and mount them using clips.

මෙහෙයුම

The Sylvania RGB Flexible Light Strips are controlled using the included IR remote. Ensure the remote is pointed towards the IR receiver on the controller for optimal response.

දුරස්ථ පාලන කාර්යයන්:

  • සක්‍රිය/අක්‍රිය: Power the light strips on or off.
  • වර්ණ තේරීම: Choose from 16 static colors using the color buttons.
  • අඳුරු වීම: Adjust the brightness of the selected color or dynamic mode.
  • ගතික මාදිලි: Select from 4 pre-programmed dynamic modes (e.g., Flash, Strobe, Fade, Smooth) to create different lighting effects.
Diagram of the IR remote control with labeled buttons for colors and modes

Image: Detailed illustration of the IR remote control, highlighting buttons for power, color selection, dimming, and dynamic modes.

නඩත්තු කිරීම

  • පිරිසිදු කිරීම: Gently wipe the LED strips with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
  • ආයු කාලය: The LED technology provides a long operational life of up to 30,000 hours under normal use conditions.
  • දුරස්ථ බැටරි ප්රතිස්ථාපනය: If the remote control becomes unresponsive, replace the CR2025 lithium coin cell battery.

දෝෂගවේෂණය

ගැටලුවවිය හැකි හේතුවවිසඳුම
විදුලි පහන් දැල්වෙන්නේ නැත.Power connection issue, remote battery dead, IR receiver blocked.Check all connections (power supply, controller, strips). Ensure arrows on connectors align. Replace remote battery. Ensure remote is pointed at the IR receiver without obstruction.
දුරස්ථ පාලකය ප්‍රතිචාර නොදක්වයි.Remote battery dead, remote too far, IR receiver blocked.Replace remote battery. Ensure remote is within range and pointed directly at the IR receiver. Remove any obstructions between the remote and receiver.
Some sections of the light strip are not lighting up.Damaged section, incorrect cutting.Inspect the strip for physical damage. If a section was cut incorrectly, it may be permanently damaged. Ensure connections are secure.

පිරිවිතර

විශේෂාංගයවිස්තර
ආදර්ශ අංකය65636
වෙළඳ නාමයLEDVANCE (සිල්වේනියාව)
වර්ණයRGB (16 colors) + White
දිග32ft (2 x 16.4ft strips)
භාවිතයගෘහස්ථ පමණි
විශේෂ ලක්ෂණColor Changing, Dimmable, Energy Efficient
ආලෝක ප්රභවයේ වර්ගයLED
බලශක්ති ප්රභවයරැහැන්ගත විදුලි
පාලක වර්ගයIR දුරස්ථ පාලකය
වෙළුමtageවෝල්ට් 12
වට්tageවොට් 24 යි
සම්බන්ධතාවයඅධෝරක්ත කිරණ
ද්රව්යප්ලාස්ටික්
අයිතමයේ බරඅවුන්ස 10.88 කි
ආයු කාලයපැය 30,000 දක්වා
ජල ප්රතිරෝධයජලයට ඔරොත්තු නොදෙන
UPC046135656361

වගකීම් සහ සහාය

This Sylvania LED Flexible Light Strip Starter Kit is backed by a වසර 1ක නිෂ්පාදකයාගේ වගකීමක්.

For technical support, warranty claims, or additional product information, please visit the official LEDVANCE webවෙබ් අඩවිය හෝ ඔවුන්ගේ පාරිභෝගික සේවා දෙපාර්තමේන්තුව අමතන්න.

ඔබට ද නැරඹිය හැකිය Amazon හි LEDVANCE වෙළඳසැල තවත් නිෂ්පාදන සහ තොරතුරු සඳහා.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.