1. හැඳින්වීම
This instruction manual provides essential information for the installation, maintenance, and safe use of your Segway Navimow Blade Assembly Plus. These blades are designed to ensure effective and precise cutting for your robotic lawnmower. Please read this manual thoroughly before use.
2. නිෂ්පාදන අවසන්view
The Segway Navimow Blade Assembly Plus includes durable carbon steel blades with cutting edges on both sides, designed for powerful and sturdy mowing. This package contains 12 blades and 12 screws for replacement.
Figure 2.1: Segway Navimow Blade Assembly Plus packaging, illustrating the included 12 blades and 12 screws.
Figure 2.2: Close-up of a robotic lawnmower's cutting disc with blades installed, demonstrating their position for mowing.
3. ගැළපුම
These blades are fully compatible with the following Segway Navimow robotic mower series:
- Segway Navimow X3 Series
- Segway Navimow i Series (i105N, i110N)
- Segway Navimow H Series (H800N-VF, H1500N-VF, H3000N-VF)
4 ආරක්ෂිත තොරතුරු
අවවාදයයි: The blades are extremely sharp. Always wear heavy-duty protective gloves when handling or replacing the blades to prevent injury. Refer to your main Navimow User Manual for additional safety guidelines.
5. පැකේජ අන්තර්ගතය
The Segway Navimow Blade Assembly Plus package includes:
- 12 x Replacement Blades (carbon steel)
- 12 x ඉස්කුරුප්පු
6. Setup & Installation (Blade Replacement)
Regular blade replacement is crucial for maintaining optimal cutting performance and lawn health. Follow these steps to replace the blades:
- විදුලිය විසන්ධි කිරීම: Ensure your Navimow robotic mower is completely powered off and disconnected from its charging station before beginning any maintenance.
- අත්වැසුම් පළඳින්න: Put on heavy-duty protective gloves to handle the sharp blades.
- Access Cutting Deck: Carefully turn the mower over to access the cutting deck and existing blades.
- පැරණි තල ඉවත් කරන්න: Use a screwdriver to remove the screws holding the old blades in place. Discard the old blades and screws safely.
- නව තල සවි කරන්න: Place a new blade onto the cutting disc, aligning the holes. Secure it with a new screw. Ensure the blade can pivot freely after installation.
- නැවත කරන්න: Repeat the process for all blades on the cutting disc. It is recommended to replace all blades simultaneously for balanced cutting.
- පරීක්ෂා කරන්න: After replacing all blades, ensure they are securely fastened and can move freely.
- Return to Service: Turn the mower upright and return it to its charging station or designated mowing area.
Video: How to Replace the Blades
This video demonstrates the step-by-step process of replacing the blades on your Segway Navimow robotic mower, ensuring proper installation for optimal performance.
Video: Replacement 6-Blade Disc Overview
ඕවර් එකක්view of a 6-blade disc, showing the components and how blades are attached, providing context for blade replacement.
7. Operating Instructions (Mower)
For detailed operating instructions of your Segway Navimow robotic mower, including initial setup, boundary mapping, and scheduling, please refer to your main Navimow User Manual. The new blades will enhance the cutting quality during operation.
Video: How to Start Manual Mowing
This video guides you through the process of initiating manual mowing with your Navimow robotic mower, including options for starting via the app or directly on the device.
Video: How to Enable and Use the Anti-theft Feature
Learn how to activate and utilize the anti-theft feature on your Navimow robotic mower, including setting up geofence boundaries and responding to alarms.
8. නඩත්තු කිරීම
To maintain optimal cutting performance, inspect the blades regularly for wear and tear. Replace blades as needed, typically when you notice a decrease in cutting quality or frayed grass tips. Always use genuine Segway Navimow replacement blades for best results.
9. දෝශ නිරාකරණය
If your mower's cutting performance declines:
- දුර්වල කැපුම් ගුණාත්මකභාවය: Replace all blades with new ones. Dull or damaged blades are the most common cause of poor cutting.
- අසාමාන්ය ශබ්දය: Check if blades are properly secured and not bent or damaged. Replace if necessary.
- කම්පනය: Ensure all blades are correctly installed and balanced. Replace any bent or damaged blades.
For other issues related to the robotic mower itself, consult the comprehensive troubleshooting section in your main Segway Navimow User Manual or contact customer support.
10. පිරිවිතර
| ගුණාංගය | විස්තර |
|---|---|
| වෙළඳ නාමය | සෙග්වේ |
| ආදර්ශ අංකය | HA002E |
| ද්රව්ය | Carbon Steel (Blades) |
| වර්ණය | Silver (Blades) |
| පැකේජයේ අන්තර්ගතය | 12 Blades, 12 Screws |
| Item Weight (per blade) | Approximately 9.07 g (0.32 ounces) |
| Product Dimensions (per blade) | 0.02"D x 0.73"W x 1.39"H |
11. වගකීම් තොරතුරු
For specific warranty details regarding the Segway Navimow Blade Assembly Plus, please refer to the product packaging or the official Segway Navimow website. General warranty information for Navimow robotic mowers typically includes:
- Mower: 3 Years
- Battery: 2 Years
වගකීම් හිමිකම් සඳහා කරුණාකර ඔබගේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.
12. සහාය
If you have any questions, require further assistance, or need to troubleshoot issues not covered in this manual, please utilize the following resources:
- නිල Webඅඩවිය: Visit the Segway Navimow official website for comprehensive FAQs and support documentation.
- Navimow App: Access Live Chat support directly through the Navimow mobile application for real-time assistance.
