පරිශීලක අත්පොත

1. හැඳින්වීම

This manual provides detailed instructions for the setup, operation, and maintenance of your Waytronic Infrared Motion Sensor Activated Sound Speaker. This device is designed to detect motion and play a pre-recorded or custom voice message, serving various purposes such as greeting visitors, providing security alerts, or acting as a reminder.

2. නිෂ්පාදන ලක්ෂණ

The Waytronic Infrared Motion Sensor Activated Sound Speaker offers the following key functionalities:

• Customizable Voice Recording: Equipped with a built-in microphone, allowing users to record and customize their own voice messages. Recording is initiated by pressing a button.
• Extended Recording Capacity: Supports recording up to 130 seconds, with the ability to segment recordings.
• පුළුල් චලන අනාවරණය: Features a detection range with a 120-degree horizontal and 60-degree vertical angle.
• වෙනස් කළ හැකි පරිමාව: Provides two distinct volume levels for clear audio output.
• නම්‍යශීලී බල විකල්ප: Can be powered by three AAA dry batteries or a DC5V USB power supply.
• Easy Re-recording: Messages can be re-recorded as many times as needed, simply by pressing a button.

3. පැකේජ අන්තර්ගතය

කරුණාකර සියලුම අයිතම පැකේජයේ ඇති බව තහවුරු කරගන්න:

• Infrared Motion Sensor Activated Sound Speaker (Black)
• සවිකරන ඉස්කුරුප්පු
• Ball Mounting Accessories
• පරිශීලක අත්පොත (මෙම ලේඛනය)

4. නිෂ්පාදන අවසන්view

රූපය 4.1: ඉදිරිපස සහ පැත්ත view of the Waytronic Infrared Motion Sensor Activated Sound Speaker. The front features the PIR sensor and speaker grille, while the side shows the mounting bracket.

රූපය 4.2: සවිස්තරාත්මක ඉදිරිපස view of the speaker with key components labeled: PIR Sensor, Volume/ON/OFF switch, Button A (Record), Button B (Play/Stop), and the built-in speaker/microphone. The ball mounting accessory is also shown.

රූපය 4.3: පසුපස view of the speaker showing the Screw Mounting Hole, Bracket Mounting points, and the Battery Case for three AAA batteries.

රූපය 4.4: පැත්ත view illustrating the USB port for power supply (DC5V) and the 360-degree rotatable mounting bracket.

5. ස්ථාපනය

1. බල සැපයුම:
   • Insert three AAA batteries into the battery case located on the back of the device (refer to Figure 4.3). Ensure correct polarity.
   • Alternatively, power the device using a DC5V USB cable connected to the USB port on the side (refer to Figure 4.4).
2. සවිකරන ස්ථානය:
   • Choose an indoor location such as a front door, corridor, or shop entrance.
   • For optimal performance and to prevent false triggers, avoid areas with direct sunlight, significant temperature variations, or proximity to air conditioners and heaters.
3. උපාංගය සවි කිරීම:
   • Use the provided mounting screws and ball mounting accessories to secure the speaker to a wall or surface. The ball mounting allows for 360-degree rotation to adjust the detection angle.
   • Ensure the PIR sensor (Figure 4.2) faces the area where motion detection is desired.

6. මෙහෙයුම

6.1. Recording a Message

1. Ensure the device is powered on using the Volume/ON/OFF switch (Figure 4.2).
2. ඔබන්න Button A (Record). The indicator light may change to confirm recording mode.
3. Speak clearly into the built-in microphone (located near the speaker grille, Figure 4.2). The maximum recording time is 130 seconds.
4. නිදහස් කරන්න බොත්තම A to stop recording. A successful recording typically requires more than 3 seconds of audio.
5. To re-record, simply repeat the process. The new recording will overwrite the previous one.

6.2. Playing a Message

1. After recording, the device is ready to play the message upon motion detection.
2. To manually play the current message, press Button B (Play/Stop). Press again to stop playback.

6.3. පරිමාව සකස් කිරීම

භාවිතා කරන්න Volume/ON/OFF switch (Figure 4.2) to select between two volume levels. Slide the switch to the desired position.

6.4. චලන හඳුනාගැනීම

Once powered on and a message is recorded, the device will automatically play the message when motion is detected within its 120-degree horizontal and 60-degree vertical detection range.

රූපය 6.1: This diagram illustrates that audio files are changed via button recording, not through USB data cable or TF card.

7. යෙදුම්

The Waytronic Motion Sensor Speaker can be utilized in various scenarios:

• Greeting Visitors: Place at an entrance to play a welcoming message.
• Security Reminder: Record a warning message to deter intruders or remind individuals of security protocols.
• Daily Audio Reminders: Use for personal reminders in homes or offices.
• Sale Advertising: Play promotional messages in retail environments.
• Animal Deterrent: Record sounds to discourage animals from entering certain areas.
• Event Enhancement: Integrate into festive displays or haunted house setups for interactive sound effects.

රූපය 7.1: Examples of applications including entrance door greeting, celebrating festivals, and home daily reminders.

රූපය 7.2: The speaker used to greet visitors upon entry.

රූපය 7.3: The speaker playing a security message to an approaching individual.

රූපය 7.4: The speaker used to deter animals, such as a lemur, with an audible message.

8. දෝශ නිරාකරණය

9. පිරිවිතර

10 ආරක්ෂිත තොරතුරු

• උපාංගය අධික උෂ්ණත්වයන්ට, සෘජු හිරු එළියට හෝ අධික ආර්ද්‍රතාවයට නිරාවරණය නොකරන්න.
• උපාංගය ජලය සහ අනෙකුත් දියර වලින් ඈත් කරන්න.
• උපාංගය ඔබම විවෘත කිරීමට හෝ අලුත්වැඩියා කිරීමට උත්සාහ නොකරන්න. සේවාව සඳහා සුදුසුකම් ලත් පුද්ගලයින් වෙත යොමු වන්න.
• දේශීය රෙගුලාසි වලට අනුව බැටරි බැහැර කරන්න. පැරණි සහ නව බැටරි හෝ විවිධ වර්ගයේ බැටරි මිශ්‍ර නොකරන්න.
• Keep out of reach of children to prevent accidental ingestion of small parts or batteries.

11. පාරිභෝගික සහාය

If you have any questions or encounter issues with your Waytronic Infrared Motion Sensor Activated Sound Speaker, please contact our customer support team. We are committed to assisting you within 24 hours.

සහාය සඳහා, කරුණාකර පිවිසෙන්න Waytronic Store on Amazon නැතහොත් ඔබේ මිලදී ගැනීම සමඟ සපයා ඇති සම්බන්ධතා තොරතුරු වෙත යොමු වන්න.