APOLLO Manual Pallet Jack (Model A-1001) Instruction Manual

1 ආරක්ෂිත තොරතුරු

Read and understand all instructions before operating this pallet jack. Failure to follow safety guidelines can result in serious injury or property damage.

• පැටවීමේ ධාරිතාව: Do not exceed the maximum rated load capacity of 5500 lbs (2495 kg).
• පැටවීමේ ස්ථායිතාව: Ensure loads are centered and stable on the forks. Unevenly distributed loads can cause tipping.
• මෙහෙයුම් මතුපිට: Operate the pallet jack on flat, level, and clear surfaces. Avoid slopes, uneven ground, or obstacles.
• පුද්ගලික ආරක්ෂක උපකරණ (PPE): Always wear appropriate safety footwear and gloves when operating.
• නිෂ්කාශනය: Maintain a safe distance from other personnel, equipment, and walls.
• Lowering Speed: Control the lowering speed to prevent sudden drops and potential damage to goods or injury.
• නඩත්තු: Regularly inspect the pallet jack for damage, wear, or leaks. Do not operate a damaged unit.
• ළමුන් සහ අනවසර පුද්ගලයින්: ළමයින් සහ අනවසර පුද්ගලයින් මෙහෙයුම් ප්‍රදේශයෙන් ඈත් කර තබන්න.

2. නිෂ්පාදන අවසන්view

The APOLLO Model A-1001 Manual Pallet Jack is designed for efficient material handling, offering a robust solution for moving heavy loads on pallets. Key features include:

• ධාරිතාව: 5500 lbs (2495 kg) maximum load.
• දෙබලක මානයන්: 21 inches wide by 48 inches long.
• එසවීමේ පරාසය: Maximum lifting height of 7.3 inches (18.5 cm) and a lowered fork height of 3 inches (7.6 cm).
• හසුරුව: Ergonomic rubber-covered handle with a 3-function control (raise, neutral, lower).
• පොම්ප පද්ධතිය: Integrated hydraulic pump for reliable lifting. Approximately 12 pump strokes for maximum lift.
• රෝද: 7.1-inch nylon steering wheels and 2.9-inch single nylon fork rollers for smooth movement.
• ඉදිකිරීම්: Welded joints and reinforced fork tips for enhanced durability.

2.1. සංරචක හඳුනා ගැනීම

Figure 1: Key Components of the Pallet Jack. This image highlights the control lever, auto-return handle, ergonomic reinforced handle, and the high-quality wheels and bearings.

Figure 2: Pallet Jack Dimensions. This diagram illustrates the overall height (47.8"), overall length (63.5"), fork length (48"), fork width (21"), and maximum lifting height (7.3").

Figure 3: Detailed Fork Dimensions. This image provides specific measurements for the fork width (6.3"), thickness (2.1"), inside distance between forks (7.9"), and lowered fork height (3").

3. සැකසීම සහ එකලස් කිරීම

The APOLLO Pallet Jack requires partial assembly, primarily the installation of the handle.

3.1. Handle Installation

1. සියලුම සංරචක ඉවත් කර සියලුම කොටස් පවතින බවට වග බලා ගන්න.
2. Align the handle base with the mounting point on the pump assembly.
3. Insert the provided pin to secure the handle to the pump assembly. Ensure the pin is fully engaged and secured.
4. Verify that the control lever on the handle operates smoothly and engages the lift/lower/neutral functions.

Figure 4: Ergonomic Handle. The handle is designed for comfortable grip and control.

Figure 5: Integrated Hydraulic Pump. This image shows the robust hydraulic pump system.

4. මෙහෙයුම් උපදෙස්

Follow these steps for safe and effective operation of your pallet jack.

4.1. Moving the Pallet Jack

To move the pallet jack without a load, ensure the control lever is in the මධ්යස්ථ position. This allows the handle to move freely and prevents accidental lifting or lowering.

4.2. බරක් එසවීම

1. Position the pallet jack: Carefully guide the forks completely under the pallet. Ensure the load is centered on the forks.
2. Set the control lever: Move the control lever on the handle to the ඔසවන්න තනතුර.
3. Pump the handle: Pump the handle up and down repeatedly. The forks will gradually lift the pallet. Continue pumping until the pallet is clear of the ground and ready for transport.

4.3. Transporting a Load

Once the load is lifted, move the control lever to the මධ්යස්ථ position. This disengages the hydraulic pump, allowing you to pull or push the pallet jack and its load to the desired location. Ensure a clear path and maintain control of the handle.

4.4. බරක් අඩු කිරීම

1. Position the load: Carefully position the pallet over the desired resting spot.
2. Set the control lever: Move the control lever on the handle to the පහළ position. The forks will slowly descend.
3. Controlled descent: For a controlled descent, gently move the lever to the lower position. The speed of descent can be regulated by the lever.
4. Alternatively, use the foot pedal: The pallet jack also features a foot pedal for lowering control. Press the foot pedal to lower the forks.

Figure 6: Durable Construction. This image highlights the smooth welding and double-layer baking varnish for scratch resistance.

Figure 7: Thickening Tow Bar. The robust tow bar design ensures stability during movement.

5. නඩත්තු කිරීම

Regular maintenance ensures the longevity and safe operation of your APOLLO Pallet Jack.

• හයිඩ්‍රොලික් තරලය: Check the hydraulic fluid level periodically. Refer to the pump unit for specific fluid type and refill instructions.
• ලිහිසි තෙල්: Lubricate all moving parts, including wheel bearings, pivot points, and the handle mechanism, with appropriate grease or oil at regular intervals.
• රෝද පරීක්ෂාව: Inspect wheels and rollers for wear, damage, or debris. Replace worn wheels to maintain smooth operation.
• පිරිසිදු කිරීම: Keep the pallet jack clean and free of dirt, dust, and corrosive materials.
• ගබඩා: Store the pallet jack in a dry, protected area when not in use.

Figure 8: Nylon Wheels. The durable nylon wheels provide smooth movement.

6. දෝශ නිරාකරණය

පොදු ගැටළු සහ ඒවායේ විසඳුම් සඳහා මෙම කොටස බලන්න.

7. පිරිවිතර

8. වගකීම් සහ සහාය

For any questions, concerns, or support regarding your APOLLO Pallet Jack, please contact APOLLOLIFT customer service.

• ප්‍රතිලාභ: This product is eligible for 30-day easy returns. Please refer to your purchase documentation for specific return policies.
• පාරිභෝගික සහාය: Contact APOLLOLIFT directly for assistance.
• ආරක්ෂණ සැලසුම්: Optional protection plans may be available for purchase. Refer to your retailer for details.