EVTSCAN 4Pcs COB LED Chip Instruction Manual

1. නිෂ්පාදන අවසන්view

The EVTSCAN 4Pcs COB LED Chip set provides a high-quality, pure white light source suitable for various DIY lighting projects. Each chip features a COB (Chip-on-Board) design, ensuring uniform and soft light emission without dazzling or strobe effects. These chips are designed for durability and efficient performance.

Image 1.1: Four EVTSCAN COB LED Chips, showing their dimensions (40mm width, 45mm height).

ප්රධාන ලක්ෂණ:

• Uniform Light Emission: Supports single-sided light emission, providing soft light without glare or flicker.
• Aluminum Metal Substrate: Ensures high heat dissipation, low light attenuation, and extended service life.
• බහුකාර්ය භාවිතය: Ideal for DIY table lamps, spotlights, downlights, ceiling lamps, and other custom lighting applications.
• Pure White Light: COB light source chip emits 6500K pure white light with a wide irradiation area.
• පහසු ස්ථාපනය: Designed for straightforward and safe connection to compatible lamp සවිකෘත.

2. පිහිටුවීම සහ ස්ථාපනය

These LED chips are designed for easy integration into existing or new lighting fixtures. Proper installation is crucial for safety and optimal performance.

ආරක්ෂිත පූර්වාරක්ෂාවන්:

• Always disconnect power to the fixture before installation or maintenance.
• Ensure proper electrical insulation and connections to prevent short circuits.
• Handle LED chips by their edges to avoid touching the light-emitting surface.
• නිශ්චිත පරිමාව ඉක්මවා නොයන්නtage (150-170V) or wattage (60W) per chip.

ස්ථාපන පියවර:

1. සවිකිරීම සකස් කරන්න: Ensure the lighting fixture is clean, dry, and has adequate space for the LED chip.
2. Mount the Chip: Securely attach the LED chip to the fixture's heat sink or mounting surface. The aluminum substrate is designed for heat dissipation, so good thermal contact is essential.
3. රැහැන් සම්බන්ධ කරන්න: Connect the positive (+) and negative (-) terminals of the LED chip to the corresponding power supply wires. Refer to the markings on the chip for correct polarity.
4. පරීක්ෂණය: Once all connections are secure and insulated, restore power and test the light.

රූපය 2.1: සමීප රූපය view of the COB LED chips, highlighting the positive (+) and negative (-) connection points for wiring.

3. මෙහෙයුම් උපදෙස්

Once properly installed, the EVTSCAN COB LED chips operate by simply applying the specified voltage. They are designed to provide consistent and high-quality illumination.

ආලෝක ලක්ෂණ:

• වර්ණ උෂ්ණත්වය: 6500K (Pure White Light).
• දීප්තිමත් ප්රවාහය: 6000LM per chip, providing bright illumination.
• කදම්භ කෝණය: Wide irradiation area due to COB design.

Image 3.1: The COB LED chips shown alongside a desk lamp, illustrating their potential use in various lighting applications.

These chips are designed for continuous operation within their specified voltage and temperature ranges. Ensure adequate ventilation for the fixture to maintain optimal performance and longevity.

4. නඩත්තු කිරීම

The EVTSCAN COB LED chips are designed for long-term reliability with minimal maintenance. However, following these guidelines can help ensure their extended service life.

සාමාන්‍ය රැකවරණය:

• පිරිසිදු කිරීම: If necessary, gently wipe the surface of the LED chip with a soft, dry, lint-free cloth. Avoid using abrasive cleaners or solvents.
• තාප කළමනාකරණය: The aluminum metal substrate provides high heat dissipation. Ensure that the chips are mounted to a suitable heat sink or fixture that allows for efficient heat transfer to prevent overheating.
• පාරිසරික තත්ත්වයන්: Operate the chips within a stable temperature and humidity environment. Avoid exposure to extreme temperatures or moisture.

Image 4.1: The reverse side of the COB LED chips, illustrating the aluminum metal substrate designed for efficient heat dissipation.

Regular inspection of wiring and connections is recommended to ensure continued safety and performance.

5. දෝශ නිරාකරණය

If you encounter issues with your EVTSCAN COB LED chips, refer to the following common troubleshooting steps:

If problems persist after following these steps, contact customer support for further assistance.

6. පිරිවිතර

Detailed technical specifications for the EVTSCAN COB LED Chip:

7. වගකීම් සහ සහාය

Specific warranty information for this product is not provided in the available documentation. For any product-related inquiries, technical support, or warranty claims, please contact the manufacturer or seller directly.

You can visit the official EVTSCAN store for more information and support:

EVTSCAN Official Store