CLOVER D25-B-TL Touchless Water Cooler Purifier Dispenser User Manual

හැඳින්වීම

Thank you for choosing the CLOVER D25-B-TL Touchless Water Cooler Purifier Dispenser. This advanced system provides convenient access to purified cold and ambient water. Featuring a GAC filtration system, UV LED self-cleaning, and touchless dispense technology, it ensures a hygienic and refreshing hydration experience. This manual provides essential information for proper setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your dispenser.

රූපය 1: ඉදිරිපස view of the CLOVER D25-B-TL Water Cooler Dispenser.

වැදගත් ආරක්ෂක තොරතුරු

උපකරණය භාවිතා කිරීමට පෙර කරුණාකර සියලු උපදෙස් හොඳින් කියවන්න. අනාගත යොමුව සඳහා මෙම අත්පොත තබා ගන්න.

• විදුලි ආරක්ෂාව: Ensure the dispenser is connected to a grounded electrical outlet. Do not use extension cords. Disconnect power before cleaning or servicing.
• ජල සම්බන්ධතාවය: Connect the dispenser only to a potable water supply. Ensure all connections are secure to prevent leaks.
• ස්ථානගත කිරීම: Place the dispenser on a flat, stable surface. Allow adequate clearance around the unit for ventilation.
• ළමුන් සහ සුරතල් සතුන්: Keep children and pets away from the dispenser, especially during operation and maintenance.
• උෂ්ණත්වය: This unit dispenses cold and ambient water only. It does NOT produce hot water.
• හානිය: Do not operate the dispenser if it has a damaged cord or plug, or if it has been dropped or damaged in any way. Contact customer support.

පැකේජයේ අන්තර්ගතය

Verify that all items listed below are included in your package.

• CLOVER D25-B-TL Water Cooler Dispenser
• First Filter (GAC Purification System)
• ජල නල
• සම්බන්ධක
• Emergency Shutoff Valve
• Tubing Clips
• පරිශීලක අත්පොත

Figure 2: Included installation kit components.

සැකසුම් උපදෙස්

1. ඇසිරීම: Carefully remove the dispenser and all components from the packaging. Retain packaging for future transport if needed.
2. ස්ථානගත කිරීම: Position the freestanding dispenser on a level, stable surface. Ensure there is adequate space around the unit for proper ventilation, especially at the rear where the cooling coils are located. The dimensions are approximately 13.58"D x 12.2"W x 43.3"H.
3. පෙරහන් ස්ථාපනය:
   • Locate the filter housing, typically at the rear or bottom access panel of the unit.
   • Insert the provided GAC purification filter into the housing as per the arrows indicating water flow.
   • Secure the filter firmly.
   

   රූපය 3: අභ්යන්තර view illustrating filter placement and water tubing.
4. ජල සැපයුම් සම්බන්ධතාවය:
   • Connect the water tubing from your potable water source to the dispenser's inlet using the provided connectors and emergency shutoff valve.
   • Ensure all connections are tight to prevent leaks. Use tubing clips to secure the tubing if necessary.
   • Slowly open the water supply valve to allow water to fill the dispenser's internal tank. Check for any leaks.
5. බල සම්බන්ධතාවය: Plug the dispenser into a grounded 120V AC electrical outlet.
6. මූලික ෆ්ලෂ්: Before first use, dispense several cups of water from both cold and ambient spouts to flush the system and filter. Discard this water.

මෙහෙයුම් උපදෙස්

The CLOVER D25-B-TL features touchless dispense and UV LED self-cleaning for enhanced hygiene.

1. බල ගැන්වීම: Once plugged in, the dispenser will begin to cool the water. Allow approximately 1-2 hours for the water to reach optimal cold temperature (35.6°F).
2. Dispensing Water (Touchless):
   • Place your cup or container under the desired spout (cold or ambient).
   • Wave your hand in front of the sensor located above the spout. The water will begin to dispense.
   • Remove your hand to stop the water flow.
   

   Figure 4: Detail of the touchless dispense spouts and sensors.

3. UV LED Self-Cleaning: The dispenser is equipped with a UV LED self-cleaning system for enhanced water purification. This system operates automatically to maintain the hygiene of the internal water tanks. Refer to the indicator lights on the top panel for its status.

නඩත්තු කිරීම

Regular maintenance ensures the best performance and water quality from your dispenser.

1. පෙරහන් ආදේශනය:
   • The GAC purification filter should be replaced periodically, typically every 6 months or as indicated by the dispenser's filter change indicator (if present).
   • Turn off the water supply and unplug the dispenser before replacing the filter.
   • Follow the filter installation steps in the Setup section to replace the old filter with a new one.
   • Flush the new filter as described in the Initial Flush step.
2. බිංදු තැටි පිරිසිදු කිරීම: The ABS drip tray is easily removed for cleaning.
   • එය ඉවත් කිරීමට බිංදු තැටිය ඉදිරියට අදින්න.
   • Empty any collected water and wash the tray with mild soap and water.
   • Rinse thoroughly and reinsert the tray.
3. බාහිර පිරිසිදු කිරීම: මෘදු, d සමග බාහිර පෘෂ්ඨයන් පිස දමන්නamp රෙදි. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්රාවණ භාවිතා නොකරන්න.
4. Internal Tank Cleaning: The UV LED self-cleaning system helps maintain internal hygiene. For additional cleaning, consult the manufacturer's website or customer support for specific instructions.

දෝෂගවේෂණය

පාරිභෝගික සහාය සම්බන්ධ කර ගැනීමට පෙර, කරුණාකර පහත පොදු ගැටළු සහ විසඳුම් වෙත යොමු වන්න:

පිරිවිතර

රූපය 5: ස්ථානගත කිරීමේ යොමුව සඳහා නිෂ්පාදන මානයන්.

වගකීම් සහ පාරිභෝගික සහාය

For warranty information, product registration, or technical assistance, please contact CLOVER customer support.

නිෂ්පාදකයා: Clover
Webඅඩවිය: CLOVER Official Store (සාමාන්‍ය නිෂ්පාදන තොරතුරු සඳහා)
නිශ්චිත වගකීම් නියමයන් සහ සම්බන්ධතා තොරතුරු සඳහා කරුණාකර ඔබේ මිලදී ගැනීමේ ලියකියවිලි බලන්න.