aigo AF12 3-in-1 ARGB Fan Kit Instruction Manual

හැඳින්වීම

This manual provides detailed instructions for the installation, operation, and maintenance of your aigo AF12 3-in-1 ARGB Fan Kit. Please read this manual thoroughly before use to ensure proper functionality and longevity of the product.

නිෂ්පාදන විශේෂාංග

The aigo AF12 3-in-1 ARGB Fan Kit offers efficient cooling and customizable lighting for your computer system. Key features include:

• ආකෘතිය: AF123IN1-BK
• විදුලි පංකා ප්‍රමාණය: 3 x 120mm fans
• විදුලි පංකාවේ වේගය: 800-2000 RPM (±10%)
• Fan Noise Level: ≤30dBA
• වායු දහරාව: 86.6 CFM
• ස්ථිතික පීඩනය: 1.27mm-H²O
• Working Current (Motor): ≤0.2A (12V)
• Working Current (Light): ≤0.48A (5V)
• මානයන්: 120 x 120 x 25 මි.මී
• ARGB ආලෝකකරණය: Addressable RGB lighting for customizable effects.

පැකේජයේ අන්තර්ගතය

පහත ලැයිස්තුගත කර ඇති සියලුම අයිතම ඔබේ පැකේජයේ ඇති බව තහවුරු කරගන්න:

• 3 x aigo AF12 ARGB Fans
• සවිකරන ඉස්කුරුප්පු
• ARGB Controller (if included in kit)
• Cables (Power, ARGB Sync)

ස්ථාපන මාර්ගෝපදේශය

Follow these steps to properly install your aigo AF12 ARGB fans into your computer case.

1. ඔබේ පද්ධතිය සූදානම් කරන්න: Power off your computer and disconnect it from the power source. Open your computer case.
2. සවිකරන ස්ථාන හඳුනා ගන්න: Determine the desired locations for your fans (e.g., front, top, rear, bottom of the case). Ensure proper airflow direction.
3. Mount the Fans: Position each fan in its chosen location. Use the provided mounting screws to secure the fans to the case. Ensure the fan blades are not obstructed.
   

   Image: An aigo AF12 fan viewed from an angle, highlighting the mounting points on its corners. This illustrates how the fan is secured.
4. බල කේබල් සම්බන්ධ කරන්න: Connect the 3-pin power connector from each fan to an available fan header on your motherboard or fan controller.
5. Connect ARGB Cables: Connect the ARGB cable from each fan to the ARGB controller (if applicable) or directly to a compatible 5V 3-pin ARGB header on your motherboard. Ensure correct pin orientation to avoid damage.
   

   රූපය: පැති වෘත්තිකයෙක්file of the aigo AF12 fan, illustrating the thickness and potential locations for cable connections on the frame.

6. කේබල් කළමනාකරණය: Route cables neatly to prevent interference with other components and to improve airflow.
7. කවරය වසා බලය සක්‍රිය කරන්න: Close your computer case, reconnect the power, and power on your system.

මෙහෙයුම් උපදෙස්

Once installed, your aigo AF12 ARGB fans will operate automatically based on your system's fan control settings. The ARGB lighting can be controlled via your motherboard's software or a dedicated ARGB controller.

විදුලි පංකා වේග පාලනය

Fan speed can typically be adjusted through your motherboard's BIOS/UEFI settings or through fan control software provided by your motherboard manufacturer. Refer to your motherboard manual for specific instructions.

ARGB ආලෝකකරණ පාලනය

If connected to a 5V 3-pin ARGB header on your motherboard, use your motherboard's ARGB synchronization software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync) to customize lighting effects, colors, and patterns.

If using a dedicated ARGB controller (often included with fan kits), refer to the controller's specific instructions for lighting adjustments.

නඩත්තු කිරීම

නිතිපතා නඩත්තු කිරීම ප්‍රශස්ත ක්‍රියාකාරිත්වය සහතික කරන අතර ඔබේ විදුලි පංකා වල ආයු කාලය දීර්ඝ කරයි.

• දූවිලි පිරිසිදු කිරීම: Periodically clean dust from the fan blades and housing using compressed air or a soft brush. Ensure the system is powered off before cleaning.
• කේබල් පරීක්ෂාව: Verify that all cables are securely connected and free from damage.
• ශබ්ද අධීක්ෂණය: Listen for unusual noises, which may indicate a fan bearing issue or obstruction.

දෝෂගවේෂණය

If you encounter issues with your aigo AF12 ARGB fans, refer to the following common solutions:

විදුලි පංකා කැරකෙන්නේ නැත

• බල සම්බන්ධතාවය පරීක්ෂා කරන්න: Ensure the fan's 3-pin power connector is securely plugged into the motherboard or controller.
• Check BIOS Settings: Verify that fan headers are enabled in your motherboard's BIOS/UEFI settings.
• Test Another Header: Try connecting the fan to a different fan header to rule out a faulty header.

ARGB ලයිට් ක්‍රියා නොකරයි

• Check ARGB Connection: Ensure the 5V 3-pin ARGB connector is correctly and securely plugged into the motherboard or controller. Verify the pin orientation.
• Check Software: Confirm that your motherboard's ARGB software is installed and configured correctly.
• ගැළපුම: Ensure your motherboard has a compatible 5V 3-pin ARGB header. This product is not compatible with 12V 4-pin RGB headers.

අධික ශබ්දය

• බාධා කිරීම් සඳහා පරීක්ෂා කරන්න: Ensure no cables or other components are touching the fan blades.
• සවි කරන ඉස්කුරුප්පු: Verify that all mounting screws are tightened to prevent vibrations.
• දූවිලි ගොඩනැගීම: Clean any dust from the fan blades.

තාක්ෂණික පිරිවිතර

වගකීම් සහ සහාය

This aigo product comes with a මාස 12ක වගකීමක් නිෂ්පාදන දෝෂ ආවරණය කරමින්, මිලදී ගත් දින සිට.

For technical support, warranty claims, or further assistance, please visit the official aigo store or contact their customer service through the details provided on their webඅඩවිය.

Official aigo Store: aigo Store on Amazon