Philips SFL3183RH LED Headlamp පරිශීලක අත්පොත

1. හැඳින්වීම

The Philips SFL3183RH LED Headlamp is a versatile and durable lighting solution designed for various outdoor and indoor activities. Featuring a powerful 200-lumen LED, multiple lighting modes, and a rechargeable battery, this headlamp provides reliable illumination for hiking, camping, running, repairing, fishing, and cycling. Its waterproof design and intelligent sensor function enhance usability and convenience.

2. පැකේජ අන්තර්ගතය

සියලුම අයිතම පැකේජයේ ඇති බව තහවුරු කරගන්න:

• නැවත ආරෝපණය කළ හැකි LED හිසamp x 1
• Hat Clip x 1
• USB ආරෝපණ කේබලය (වර්ගය-C) x 1
• Adjustable Light Strip (Headband) x 1

3. නිෂ්පාදන ලක්ෂණ

• 6 ආලෝකකරණ මාදිලි: Includes low, medium, high, SOS flash, red light, and red/blue flashing light modes for diverse needs.
• විශාලන කාර්යය: Easily switch between spotlight and floodlight modes by rotating the headlamp.
• අධි බලැති LED: 200 lumens LED bulb illuminates up to 200 meters.
• නැවත ආරෝපණය කළ හැකි බැටරි: Built-in 1200 mAh lithium battery, rechargeable via USB-C. Provides up to 9 hours of light in medium brightness mode.
• සකස් කළ හැකි නිර්මාණය: හෙඩ්ල්amp rotates 140° for angle adjustment. Comes with an adjustable non-slip elastic headband and a hat clip.
• සැහැල්ලු සහ කල් පවතින: Weighs only 75 grams, made from ABS material, drop-proof, and waterproof.
• Intelligent Sensor Function: Control the light switch with a hand wave, ideal for situations where hands are wet or dirty.
• Smart Battery Reminder: Green light (above 30%), red light (30%-10%), flashing red light (below 10%).

4. පිහිටුවීම

4.1 හෙඩ්බෑන්ඩ් එක සවි කිරීම

The adjustable elastic headband is pre-attached. To adjust the fit, slide the buckles on the strap until it comfortably fits around your head or helmet. Ensure it is snug but not too tight.

4.2 Using the Hat Clip

For alternative wear, attach the headlamp to the brim of a hat using the included hat clip. This allows for hands-free operation without obstructing your view.

හෙඩ්ල් එකamp can be attached to a hat brim using the included clip and offers 140-degree rotation.

5. මෙහෙයුම් උපදෙස්

5.1 බලය සක්‍රිය/අක්‍රිය කිරීම සහ මාදිලි තේරීම

Press the power button once to turn on the headlamp. Subsequent presses will cycle through the white light modes: Low → Medium → High. Double-click the power button to activate the SOS flash mode. Hold down the power button to turn on the red auxiliary light. Double-click again to switch to the red and blue flashing mode.

Control buttons and various light modes including white, red, red/blue, and SOS flash.

5.2 විශාලනය කිරීමේ කාර්යය

To adjust the beam focus, rotate the head of the lamp:

• Rotate counterclockwise for a focused අවධානය යොමු කිරීම කදම්බ.
• Rotate clockwise for a wide ගංවතුර ආලෝකය කදම්බ.

Illustration of spotlight for focused illumination and floodlight for wide area coverage.

5.3 Intelligent Sensor Function

හෙඩ්ල් එකamp features an infrared sensor for hands-free operation. Press the dedicated sensor button to activate this function. Once activated, you can turn the light on or off by waving your hand approximately 20 cm in front of the sensor. Press the sensor button again to deactivate the sensor function.

Activate the intelligent infrared sensor to control the light with a simple hand wave.

6. ආරෝපණය සහ බැටරිය

6.1 හෙඩ්ල් ආරෝපණය කිරීමamp

Connect the included USB-C charging cable to the headlamp's charging port and plug the other end into a compatible USB power source (e.g., wall adapter, power bank, computer USB port). A full charge takes approximately 3 hours.

හෙඩ්ල් එකamp charges via USB-C, requiring approximately 3 hours for a full charge.

6.2 බැටරි දර්ශකය

හෙඩ්ල් එකamp features an intelligent battery reminder system:

• හරිත ආලෝකය: බැටරි මට්ටම 30% ට වඩා වැඩිය.
• රතු ආලෝකය: බැටරි මට්ටම 30% සහ 10% අතර වේ.
• දැල්වෙන රතු ආලෝකය: බැටරි මට්ටම 10% ට වඩා අඩුය.

Battery indicator lights show remaining power: green (above 30%), red (10-30%), flashing red (below 10%).

6.3 ආරෝපණ පූර්වාරක්ෂාවන්

Charge the product promptly when the battery is low. Avoid fully depleting the battery before recharging, as this can shorten the product's lifespan and affect performance.

7. නඩත්තු කිරීම

7.1 පිරිසිදු කිරීම

හිස පිස දමන්නamp මෘදු සමග, ඩීamp cloth. Do not use abrasive cleaners or solvents, as they may damage the surface or internal components. Ensure the charging port cover is securely closed before cleaning or exposing to water.

7.2 ගබඩා කිරීම

ශීර්ෂය ගබඩා කරන්නamp in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, charge the battery periodically to maintain its health.

7.3 ජල ප්‍රතිරෝධය

හෙඩ්ල් එකamp is waterproof. However, avoid prolonged submersion or exposure to high-pressure water jets to prevent potential damage.

හෙඩ්ල් එකamp is designed to be waterproof, suitable for use in various weather conditions.

8. දෝශ නිරාකරණය

9. පිරිවිතර

10. වගකීම් සහ සහාය

10.1 නිෂ්පාදකයාගේ වගකීම

This Philips SFL3183RH LED Headlamp comes with a 2-year manufacturer's warranty. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use.

10.2 පාරිභෝගික සහාය

For technical assistance, troubleshooting, or warranty inquiries, please contact Philips customer support through their official website or the retailer where the product was purchased. Please have your model number (SFL3183) and purchase date available when contacting support.