හැඳින්වීම
This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your Portronics Power Plus II Mini UPS. This device is designed to provide uninterrupted power to your 12V DC Wi-Fi router or broadband modem, ensuring continuous internet connectivity during power outages. It features automatic power switching and is built for simple plug-and-play installation.
සැකසුම් උපදෙස්
Follow these steps to correctly install your Portronics Power Plus II Mini UPS:
- Unplug your Wi-Fi Router's Power Adapter: Disconnect the power adapter from your Wi-Fi router.
- Connect Router Adapter to UPS (IN): Plug your Wi-Fi router's power adapter into the 'IN' port of the Power Plus II Mini UPS.
- Connect UPS (OUT) to Wi-Fi Router: Connect the 'OUT' port of the Power Plus II Mini UPS to your Wi-Fi router using the provided DC cable.
Image: Step-by-step connection guide for the Power Plus II Mini UPS.
ගැළපුම
The Power Plus II Mini UPS supports devices requiring 12V DC and up to 3A current. It includes both 2.1 mm and 5.5 mm DC pins for broad compatibility.
Image: DC pin compatibility details for the Power Plus II Mini UPS.
This device is compatible with a wide range of router and modem brands, including but not limited to TP-Link, Cisco, ASUS, Tenda, Linksys, Netgear, ACT Fibernet, Excitel, YOU Broadband, Huawei, Gigatel, Spectranet, and D-Link.
Image: List of compatible router and modem brands.
මෙහෙයුම් උපදෙස්
Once connected, ensure the ON/OFF switch on the Power Plus II Mini UPS is in the 'ON' position. The device will automatically detect the power supply and provide continuous power to your router.
Image: Location of the ON/OFF switch on the Power Plus II Mini UPS.
Automatic Power Switching
The Power Plus II features zero-lag switching. In the event of a power cut, the device instantly switches to battery mode without any interruption to your internet connection. When grid power is restored, it seamlessly switches back to direct supply while recharging its internal batteries.
ආරක්ෂණ විශේෂාංග
The Mini UPS is equipped with multiple protection mechanisms to ensure the safety and longevity of your devices:
- Zero Lag Switching: Ensures seamless transition between grid power and battery backup.
- Over-charging Protection: Prevents damage to the battery from excessive charging.
- වෙළුම යටතේtagඊ ආරක්ෂාව: Safeguards connected devices from low voltagඊ කොන්දේසි.
Image: Key protection features of the Power Plus II Mini UPS.
බැටරි බැකප්
The device provides up to 4 hours of backup power, depending on the current consumption of the connected Wi-Fi router. It is powered by 2 x 2000mAh Lithium Polymer batteries.
නඩත්තු කිරීම
To ensure optimal performance and longevity of your Power Plus II Mini UPS, consider the following maintenance tips:
- පිරිසිදු කිරීම: මෘදු, වියළි රෙද්දකින් උපාංගය නිතිපතා පිස දමන්න. දියර පිරිසිදු කරන්නන් හෝ උල්ෙල්ඛ ද්රව්ය භාවිතා කිරීමෙන් වළකින්න.
- වාතාශ්රය: අධික උනුසුම් වීම වැළැක්වීම සඳහා උපාංගය හොඳින් වාතාශ්රය ඇති ප්රදේශයක තබා ඇති බවට වග බලා ගන්න. කිසිදු වාතාශ්රය විවරයක් අවහිර නොකරන්න.
- ගබඩා: If storing the device for an extended period, ensure it is fully charged and store it in a cool, dry place. Recharge periodically to maintain battery health.
- පාරිසරික තත්ත්වයන්: උපාංගය අධික උෂ්ණත්වයට, සෘජු හිරු එළියට හෝ අධික ආර්ද්රතාවයට නිරාවරණය කිරීමෙන් වළකින්න.
දෝෂගවේෂණය
If you encounter issues with your Power Plus II Mini UPS, refer to the following common troubleshooting steps:
- No Power to Router:
- Ensure the ON/OFF switch on the UPS is in the 'ON' position.
- Verify that the router's original power adapter is securely plugged into the UPS 'IN' port.
- Check that the DC cable from the UPS 'OUT' port is firmly connected to your router.
- Confirm that the wall outlet providing power to the router's adapter is functional.
- Short Backup Time:
- Backup duration depends on the power consumption of your router. Higher consumption will result in shorter backup times.
- Ensure the UPS has been fully charged before use.
- Router Restarts During Power Transition:
- The Power Plus II is designed for zero-lag switching. If restarts occur, ensure all connections are secure and the UPS is functioning correctly. Contact support if the issue persists.
For issues not covered here, please refer to the Support section.
පිරිවිතර
| විශේෂාංගය | පිරිවිතර |
|---|---|
| වෙළඳ නාමය | Portronics |
| ආදර්ශ අංකය | POR-3159 |
| බැටරි සෛල සංයුතිය | ලිතියම් පොලිමර් |
| නිෂ්පාදන මානයන් (D x W x H) | 11.7D x 7.4W x 5.5H සෙන්ටිමීටර |
| වෙළුමtage | වෝල්ට් 12 |
| Ampකෝපය | 3 Amps |
| බැටරි ආරෝපණ කාලය | පැය 4 යි |
| ආකෘති සාධකය | සංයුක්ත |
| උපරිම බලය | වොට් 36 |
| ප්රතිදාන ධාරාව | 3 Amps |
| ප්රතිදාන වෙළුමtage | වෝල්ට් 12 |
| සම්බන්ධක වර්ගය | DC |
| අලෙවිසැල් ගණන | 1 |
| Battery Average Life (Runtime) | පැය 4 යි |
| ප්රතිදානය Wattage | වොට් 36 |
| අයිතමයේ බර | ග්රෑම් 240 යි |
| සංවෘත ද්රව්ය | ABS ප්ලාස්ටික් |
වගකීම් සහතිකය
The Portronics Power Plus II Mini UPS comes with a වසර 1ක වගකීමක් from the date of purchase. Please retain your purchase receipt for warranty claims. For detailed warranty terms and conditions, refer to the official Portronics webවෙබ් අඩවිය හෝ පාරිභෝගික සහාය අමතන්න.
සහාය
For any assistance, technical support, or warranty-related queries, please contact Portronics customer support:
- විද්යුත් තැපෑල: help@portronics.com
- දුරකථන/WhatsApp: +91 9555-245-245
- ආධාරක ද්වාරය: https://support.portronics.com
Support hours are typically 10 AM - 6 PM (local time).
Image: Portronics Port-Care support details.