LiebeWH HW-QB6 5-in-1 Wall Scanner Detector

1. හැඳින්වීම

The LiebeWH HW-QB6 is a versatile 5-in-1 wall scanner detector designed to accurately locate wood studs, metal objects (rebar, pipes, conduit), and live AC wires behind walls, floors, and ceilings. This device is an essential tool for home renovation projects, installation tasks, and general DIY work, providing critical information to prevent damage and ensure safety.

This manual provides detailed instructions for the safe and effective operation, maintenance, and troubleshooting of your LiebeWH HW-QB6 wall scanner.

රූපය 1: ඉදිරිපස view of the LiebeWH HW-QB6 Wall Scanner Detector, showing the LCD display and control buttons.

2 ආරක්ෂිත තොරතුරු

WARNING: Read all safety warnings and instructions before using this device. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

• Always assume live electrical wires are present behind walls. Exercise extreme caution when drilling or cutting.
• Do not rely solely on the detector to locate live AC wires. Always turn off power to the area you are working on at the circuit breaker before drilling or cutting.
• This device is intended for detecting objects behind common wall materials such as drywall, plywood, and concrete. Performance may vary with different materials or wall thicknesses.
• Keep the device dry and clean. Do not expose it to moisture or extreme temperatures.
• උපාංගය විවෘත කිරීමට හෝ වෙනස් කිරීමට උත්සාහ නොකරන්න. ඇතුළත පරිශීලක-සේවා කළ හැකි කොටස් නොමැත.
• දේශීය රෙගුලාසි වලට අනුව වගකීමෙන් යුතුව බැටරි බැහැර කරන්න.

3. නිෂ්පාදන සංරචක

The LiebeWH HW-QB6 wall scanner features an ergonomic design for comfortable handling and a clear LCD display for easy interpretation of results.

Figure 2: Close-up of the LCD display and control buttons, including Power, Mode Selection, and AC detection.

ප්රධාන ලක්ෂණ:

• LCD සංදර්ශකය: Provides visual indications for detection mode, signal strength, battery level, and center indication.
• බල බොත්තම: උපාංගය සක්‍රිය/අක්‍රිය කරයි.
• මාදිලිය තේරීමේ බොත්තම: Cycles through different detection modes (Wood, Metal, AC).
• Ergonomic Handle: Designed for comfortable and secure grip during use.
• Sensor Area: Located on the back of the device, this area must be flat against the wall for accurate scanning.

4. පිහිටුවීම

4.1 බැටරි ස්ථාපනය

1. උපාංගයේ පිටුපස බැටරි මැදිරි කවරය සොයා ගන්න.
2. මැදිරිය විවෘත කිරීම සඳහා කවරය ලිස්සන්න හෝ ගලවන්න.
3. Insert one 9V (6F22) battery, ensuring the polarity (+/-) matches the diagram inside the compartment.
4. බැටරි මැදිරි කවරය ආරක්ෂිතව වසා දමන්න.

Figure 3: Open battery compartment for 9V (6F22) battery installation.

4.2 මූලික ක්‍රමාංකනය

For accurate results, the device must be calibrated before each use or when changing scanning locations.

1. උපාංගය සක්‍රිය කිරීමට බල බොත්තම ඔබන්න.
2. Place the device flat against the wall surface where you intend to scan, ensuring there are no known studs, metal, or wires in that specific spot.
3. Press and hold the Mode Selection button (or the dedicated calibration button if present, refer to display for indication) until the calibration process is complete (usually indicated by a beep or a stable display reading).
4. The device is now calibrated and ready for use.

5. මෙහෙයුම් උපදෙස්

The LiebeWH HW-QB6 offers multiple detection modes for various materials. Select the appropriate mode for your task.

5.1 Selecting a Detection Mode

Press the Mode Selection button to cycle through the available modes. The selected mode will be indicated on the LCD display.

• ලී ස්ටඩ් ස්කෑන්: For locating wood studs and joists.
• ලෝහ ස්කෑන්: For detecting metal objects such as rebar, pipes, and metal conduit.
• AC Wire Scan: For identifying live unshielded AC electrical wires.

5.2 Scanning Procedure

1. Ensure the device is calibrated as described in Section 4.2.
2. උපාංගය බිත්ති මතුපිටට සමතලාව තබන්න.
3. Slowly slide the device horizontally across the surface. Maintain constant contact with the wall.
4. Observe the LCD display for indications of detected objects.
5. When an object is detected, the signal strength indicator will increase, and an audible alert may sound. The "CENTER" indicator will illuminate when the device is directly over the center of the object.
6. Mark the edges and center of the detected object for accurate positioning.

Figure 4: Close-up of the LCD display showing a detected object with center indication and signal strength.

5.3 Interpreting the LCD Display

• Signal Strength Bars: Indicate proximity to a detected object. More bars mean closer proximity.
• CENTER Indicator: Appears when the device is directly over the center of a stud or object.
• ප්‍රකාර අයිකනය: Displays the currently selected detection mode (e.g., wood icon, metal icon, AC lightning bolt icon).
• බැටරි දර්ශකය: Shows the current battery level. Replace batteries when low.
• Depth Indication (if applicable): Some models may show an approximate depth. Refer to the specific icons on your display.

6. නඩත්තු කිරීම

• පිරිසිදු කිරීම: උපාංගය මෘදු, ඩී සමඟ පිස දමන්නamp රෙදි. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්රාවණ භාවිතා නොකරන්න.
• ගබඩා: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the battery to prevent leakage.
• බැටරි ආදේශනය: Replace the 9V battery when the low battery indicator appears on the LCD display.

7. දෝශ නිරාකරණය

8. පිරිවිතර

• ආකෘතිය: HW-QB6
• හඳුනාගැනීමේ මාතයන්: Wood, Metal, AC Wire
• බලශක්ති ප්රභවය: 1 x 9V (6F22) Battery (not included)
• නිෂ්පාදන මානයන්: Approximately 19L x 8W x 5H Centimetres
• බර: ආසන්න වශයෙන් 205 g (බැටරි නොමැතිව)
• මෙහෙයුම් උෂ්ණත්වය: 0°C සිට 40°C (32°F සිට 104°F)
• ගබඩා උෂ්ණත්වය: -10°C සිට 50°C (14°F සිට 122°F)

9. වගකීම් සහ සහාය

For warranty information and technical support, please refer to the documentation provided with your purchase or contact LiebeWH customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

For further assistance, please visit the official LiebeWH webඅඩවියට පිවිසෙන්න හෝ ඔවුන්ගේ සහාය නාලිකා අමතන්න.