LLCC68 LoRa Wireless Module E220-400M30S User Manual

1. හැඳින්වීම

The EBYTE E220-400M30S is a high-performance LoRa wireless module designed for long-range data transmission. Based on the original Semtech LLCC68 chip, this module operates in the 433/470MHz global license-free ISM band, offering excellent anti-interference capabilities, longer transmission distance, and stable communication. It features a maximum transmit power of 30dBm and a reference distance of up to 10km in clear, open areas.

The module supports both LoRa and FSK modes, providing flexibility for various applications such as smart home systems, intelligent control, wireless control, and wireless data transmission. Its compact SMD package and optional dual antenna interfaces (IPEX and stamp hole) make it easy to integrate into diverse projects.

2 ප්රධාන ලක්ෂණ

• චිප්සෙට්: Original Semtech LLCC68
• මෙහෙයුම් සංඛ්යාතය: 433/470MHz (ISM band, 410~493MHz range)
• සම්ප්‍රේෂණ බලය: උපරිම 30dBm
• සන්නිවේදන දුර: Up to 10km (clear and open area, antenna height 2.5m, air data rate 2.4kbps)
• දත්ත හුවමාරු අනුපාතය:
  • LoRa mode: 1.76k ~ 62.5kbps
  • FSK mode: 0.6k ~ 300kbps
• ඇන්ටෙනා විකල්ප: IPEX antenna interface or built-in stamp hole antenna
• අතුරු මුහුණත: SPI
• පැකේජය: SMD
• මෙහෙයුම් වෙළුමtage: 3.0V - 5.5V (typical 5V)
• මෙහෙයුම් උෂ්ණත්වය: -40℃ to +85℃ (Industrial grade)
• FIFO Storage: Built-in 256Byte data buffer
• RF ආවරණ: Professional alloy shield for anti-interference and anti-static

3. පිරිවිතර

3.1. Limit Parameters

3.2 මෙහෙයුම් පරාමිතීන්

4. පිහිටුවීම සහ ස්ථාපනය

4.1. Module Integration

The E220-400M30S module comes in an SMD (Surface Mount Device) package, designed for integration onto a PCB. Ensure proper soldering techniques are used to avoid damage to the module. The module's pins are spaced at 2.54mm for easy connection.

4.2. බල සැපයුම

Provide a stable power supply between 3.0V and 5.5V. A typical operating voltage of 5V is recommended to ensure optimal output power. Using a 5V TTL communication level is risky and may damage the module; ensure your communication level matches the module's 3.3V.

4.3. Antenna Selection

The module offers two antenna options:

• IPEX Antenna Interface: For connecting an external antenna. This is suitable for applications requiring increased transmission distance.
• Stamp Hole Antenna: A built-in antenna option, easier to integrate and suitable for most general requirements.

Note: Only one antenna type can be selected and used at a time.

4.4. සන්නිවේදන අතුරු මුහුණත

The module uses an SPI (Serial Peripheral Interface) for communication. Ensure your host microcontroller is configured to communicate via SPI at speeds between 0-10Mbps.

5. මෙහෙයුම

5.1. Data Transmission and Reception

The E220-400M30S module facilitates wireless data communication using LoRa spread spectrum technology. This technology provides robust anti-interference capabilities and ensures stable communication over long distances.

5.2. Transmit Power Adjustment

The module allows for adjustment of the transmit power, with a maximum output of 30dBm. This enables optimization of range and power consumption based on application requirements.

5.3. වැඩසටහන්කරණය

The module's air data rate and other operational parameters are controlled via user programming through the SPI interface. Refer to the detailed user manual PDF for specific register configurations and programming examples.

6. නඩත්තු කිරීම

• හැසිරවීම: Always handle the module with care, preferably using anti-static precautions, to prevent damage from electrostatic discharge.
• පරිසරය: Operate the module within the specified industrial temperature range of -40℃ to +85℃. Avoid exposure to extreme temperatures, humidity, or corrosive environments.
• පිරිසිදු කිරීම: If necessary, clean the module gently with a dry, soft cloth. Do not use liquids or harsh chemicals.
• RF පලිහ: The module is equipped with a professional RF shield to protect against external electromagnetic interference. Do not attempt to remove or modify this shield.

7. දෝශ නිරාකරණය

• සන්නිවේදනය නැත:
  - Verify power supply voltage 3.0V-5.5V තුළ ඇත.
  - Check all SPI connections (NSS, SCK, MOSI, MISO) for proper wiring.
  - Ensure communication level is 3.3V; 5V TTL can damage the module.
  - Confirm your microcontroller's SPI configuration matches the module's requirements.
• දුර්වල පරාසය/සංඥාව:
  - Ensure an appropriate antenna is connected and properly installed (either IPEX external or built-in stamp hole).
  - Check for obstructions between transmitting and receiving modules.
  - Verify transmit power settings in your programming.
  - Ensure the operating environment is free from excessive electromagnetic interference.
• මොඩියුලය අධික ලෙස රත් වීම:
  - Check the power supply voltage; excessive voltage can cause overheating.
  - Ensure adequate ventilation if the module is enclosed.
• මොඩියුලය ප්‍රතිචාර නොදක්වයි:
  - Try resetting the module via the NRST pin.
  - Re-check all power and ground connections.

8 පරිශීලක ඉඟි

• ඇන්ටෙනා ප්‍රශස්තකරණය: For maximum range, especially in outdoor or challenging environments, consider using an external IPEX antenna with appropriate gain.
• බලශක්ති පරිභෝජනය: Utilize the module's sleep mode (1µA sleep current) in battery-powered applications to conserve energy when not actively transmitting or receiving.
• මැදිහත්වීම් කළමනාකරණය: While LoRa offers good anti-interference, proper grounding and shielding of your PCB design can further enhance performance in noisy electrical environments.
• ස්ථිරාංග සංවර්ධනය: Start with simple transmit/receive examples provided by EBYTE or the LLCC68 chip manufacturer to quickly get your application running.

9. වගකීම් සහ සහාය

For detailed technical support, additional documentation, and warranty information, please refer to the official EBYTE resources. The comprehensive user manual PDF can be downloaded from the manufacturer's webඅඩවිය:

E220-400M30S පරිශීලක අත්පොත PDF

For PCB design files, you can find them here:

E220-400M30S PCB Files

EBYTE is committed to providing reliable products and support for their wireless communication modules.