Roborock S7 Max Ultra Q100TSC වැකුම් ක්ලීනර් උපාංග උපදෙස් අත්පොත

හැඳින්වීම

This manual provides instructions for the installation and maintenance of replacement parts for your Roborock S7 Max Ultra, S7 Pro Ultra, and Q100TSC robotic vacuum cleaners. Regular replacement and cleaning of these accessories are crucial for maintaining optimal performance and extending the lifespan of your device.

Setup and Replacement

Follow these steps to replace the various accessories of your Roborock vacuum cleaner. Refer to the video demonstration for visual guidance.

1. Dustbin Filter Replacement

1. Open the main cover of the robot vacuum.
2. Press the latch to remove the dustbin.
3. Open the filter cover on the dustbin.
4. පැරණි පෙරහන ඉවත් කරන්න.
5. Insert the new filter and close the cover.
6. Place the dustbin back into the robot vacuum and close the main cover.

2. දූවිලි බෑග් ආදේශ කිරීම

1. Locate the dust bag compartment on the auto-empty dock.
2. Carefully pull out the full dust bag. The bag will automatically seal upon removal.
3. Insert a new dust bag, ensuring it is securely seated in the compartment.

3. පැති බුරුසු ආදේශනය

1. රොබෝ රික්තය උඩු යටිකුරු කරන්න.
2. Use a screwdriver to remove the screw holding the side brush.
3. පැරණි පැති බුරුසුව ඉවත් කරන්න.
4. Align the new side brush and secure it with the screw.

4. ප්‍රධාන බුරුසු ආදේශනය

1. රොබෝ රික්තය උඩු යටිකුරු කරන්න.
2. Release the main brush cover latches and remove the cover.
3. පැරණි ප්‍රධාන බුරුසුව ඉවත් කරන්න.
4. නව ප්‍රධාන බුරුසුව ඇතුළු කරන්න, කෙළවර කට්ට සමඟ පෙළගැසී ඇති බව සහතික කර ගන්න.
5. Reattach the main brush cover, making sure the tabs are inserted correctly into the slots.

5. මොප් පෑඩ් ප්‍රතිස්ථාපනය

1. Remove the dirty mop pad from the mop attachment.
2. Attach a new mop pad, ensuring it is securely fastened.

නඩත්තු කිරීම

Regular maintenance of your vacuum cleaner accessories ensures optimal cleaning performance.

• පැති බුරුසු: It is recommended to clean the side brush once a month.
• ප්‍රධාන බුරුසුව: It is recommended to clean the main brush every two weeks.
• හෙපා පෙරහන: Clean the filter regularly by tapping out dust. Replace every 3-6 months depending on usage.
• මොප් පෑඩ්: Wash the mop pad after each use. Replace every 1-3 months depending on usage.
• දූවිලි බෑගය: Replace the dust bag when full. The auto-empty dock will usually indicate when replacement is needed.

පිරිවිතර

දෝෂගවේෂණය

If your Roborock vacuum cleaner is not performing optimally after replacing parts, consider the following:

• අඩු කළ චූෂණ: Ensure the HEPA filter is clean and correctly installed. Check the dust bag for fullness and proper seating.
• Poor Sweeping: Verify that the side brush and main brush are free of tangled hair or debris and are installed correctly.
• අකාර්යක්ෂම පිසදැමීම: Ensure the mop pad is clean and properly attached.
• නොගැලපෙන කොටස්: Double-check that you have purchased the correct replacement parts for your specific Roborock model (S7 Max Ultra, S7 Pro Ultra, or Q100TSC).

For persistent issues, consult your Roborock vacuum cleaner's main user manual or contact Roborock customer support.

පරිශීලක ඉඟි

සපයා ඇති ප්‍රති-වෙබ් අඩවියෙන් නිශ්චිත පරිශීලක උපදෙස් ලබා ගත නොහැකි විය.views or Q&A. However, general tips for vacuum accessories include:

• Always keep spare parts on hand to ensure continuous operation of your robot vacuum.
• For households with pets, consider more frequent cleaning and replacement of brushes to manage pet hair effectively.
• Wash reusable mop pads thoroughly after each use to prevent odor and maintain hygiene.

වගකීම් සහ සහාය

For information regarding warranty coverage, technical support, or service inquiries for your Roborock vacuum cleaner and its accessories, please refer to the official Roborock website or contact their authorized customer service channels. Keep your purchase receipt as proof of purchase.