1. හැඳින්වීම සහ අවසන්view
The ESTINK P6 Digital Head-Up Display (HUD) is an advanced automotive accessory designed to project essential driving information directly into your line of sight, enhancing safety and convenience. Featuring a dual system (OBD2 and GPS), it offers comprehensive data display and broad compatibility.
Key features include dynamic LED lighting that changes color with driving speed (blue for normal, red flashing for alarms), customizable display modes, and the ability to show both OBD2 and GPS data on the same interface. The 3-inch screen provides clear and concise information.
Figure 1: ESTINK P6 HUD mounted on a car dashboard, displaying key driving information.
2. පැකේජ අන්තර්ගතය
සියලුම අයිතම පවතින බවත් හොඳ තත්ත්වයේ පවතින බවත් සහතික කර ගැනීමට කරුණාකර පැකේජය ප්රවේශමෙන් පරීක්ෂා කරන්න:
- 1 x P6 Head-Up Display Host
- 1 x OBD කේබලය
- 1 x USB කේබලය
- 1 x Small Crowbar
- 1 x පරිශීලක අත්පොත
- 1 x ද්විත්ව ඒක පාර්ශවීය ටේප්
- 1 x Suction Cup Bracket
- 1 x ඉස්කුරුප්පු නියනක්
Figure 2: All components included in the ESTINK P6 HUD package.
3. පිරිවිතර
| විශේෂාංගය | විස්තරය |
|---|---|
| අයිතමයේ වර්ගය | හිස ඉහළට සංදර්ශකය |
| ද්රව්ය | ඉලෙක්ට්රෝනය |
| වැඩ කරන වෙළුමtage | 11V-18V (Use USB cable for vehicles with voltage 24V ට වැඩි) |
| පද්ධතිය | OBD2+GPS Dual System |
| තිර ප්රමාණය | අඟල් 3 |
| OBD Mode Functions | Vehicle speed, water temperature, voltage, fuel consumption, rotational speed (RPM), single mileage, total mileage, travel time, driving direction, number of satellites, altitude, time, intake pressure, oil temperature, air-fuel ratio, turbine pressure, acceleration test, brake test, fault code clearing, data stream reading. |
| OBD Mode Alarms | Overspeed alarm, overhigh rotational speed alarm, water temperature alarm, voltagඊ අනතුරු ඇඟවීම. |
| GPS මාදිලියේ කාර්යයන් | වාහන වේගය, වෝල්ට්tage, satellite time, altitude, number of satellites, driving direction, single mileage, driving time, acceleration test, brake test. |
| GPS Mode Alarms | Overspeed alarm, low voltagඊ අනතුරු ඇඟවීම. |
| මානයන් (L x W x H) | 13 cm x 11 cm x 8 cm |
| බර | කිලෝ ග්රෑම් 0.321 කි |
අනුකූලතා සටහන: The OBD2 mode is compatible with European cars manufactured after 2005 and cars from other regions manufactured after 2008. The GPS mode is universally compatible with all vehicles. If your vehicle is not OBD2 compatible, please use the GPS mode.
Figure 3: Illustration of the dual OBD and GPS system architecture.
4. පිහිටුවීම සහ ස්ථාපනය
Follow these steps to install your ESTINK P6 Head-Up Display:
- සකස් කිරීම: Ensure you have the P6 HUD unit and the appropriate connection cable (OBD or USB).
- කේබලය සම්බන්ධ කරන්න:
- For OBD2 mode: Locate your car's OBD interface (usually under the dashboard near the steering wheel) and connect the provided OBD cable to both the car's port and the HUD.
- For GPS mode (or if car voltage is >24V): Connect the provided USB cable to the HUD and a suitable USB power source in your vehicle.
- බල ගැන්වීම: Start your vehicle's engine. Then, turn on the power switch of the HUD unit.
- Self-Test and Initialization: The HUD will power on, perform a self-test, and display a startup screen. After completion, it will enter the working interface, indicating successful installation.
- සවි කිරීම:
- Tear off the adhesive film from the bottom of the HUD unit or attach the suction cup bracket.
- Choose a suitable position on your dashboard that provides a clear line of sight without obstructing your view of the road. Secure the unit in place.
Figure 4: Proper placement of the HUD on the dashboard for optimal visibility.
5. මෙහෙයුම් උපදෙස්
The ESTINK P6 HUD offers various functions and customization options:
5.1 Mode Selection (OBD2 vs. GPS)
The P6 HUD automatically detects the connection type. If an OBD2 connection is established, it will default to OBD2 mode. If OBD2 is not detected or not compatible, it will switch to GPS mode. You can typically switch between modes or customize display settings using the physical buttons on the device (refer to the included manual for specific button functions).
5.2 සංදර්ශක අභිරුචිකරණය
The device allows for DIY selection across 9 different display modes. You can customize small icons and the data displayed on the interface. Refer to the detailed user manual for instructions on navigating the menu and selecting your preferred display configurations.
5.3 ඒකක මාරු කිරීම
You can switch between different measurement units:
- Speed: Miles Per Hour (MPH) or Kilometers Per Hour (KM/H)
- Pressure: PSI, Bar, or 100KPA
5.4 Ambient Light Feature
The ambient light strip on the HUD changes color based on your driving status:
- නිල්: Indicates normal operation. The color may change subtly with the environment.
- රතු සහ දැල්වීම: Activates during an alarm condition (e.g., overspeed, high RPM). It remains in the brightest state during an alarm.
The ambient light can be turned off or adjusted manually through the device settings. However, even if turned off, it will still flash red in case of an alarm to ensure critical warnings are visible.
Figure 5: Ambient light behavior and settings.
5.5 අනතුරු ඇඟවීමේ සැකසුම්
You can configure various alarms to alert you to critical vehicle conditions:
- අධික වේගයෙන් අනතුරු ඇඟවීම
- Overhigh Rotational Speed (RPM) Alarm
- ජල උෂ්ණත්ව අනතුරු ඇඟවීම
- වෙළුමtagඊ එලාම්
- අඩු වෙළුමtage Alarm (GPS mode)
Consult the included user manual for detailed instructions on how to access and adjust these alarm thresholds.
5.6 දෝෂ කේත ඉවත් කිරීම
In OBD2 mode, the HUD can display and clear certain fault codes. This feature can be accessed through the device's menu. Always consult a qualified mechanic for persistent or serious fault codes.
5.7 වේලාව සැකසීම
The device allows you to set the time displayed on the lower right corner. Refer to the manual for specific menu navigation to adjust the time.
6. දෝශ නිරාකරණය
If you encounter issues with your ESTINK P6 HUD, refer to the following common problems and solutions:
| ගැටලුව | විය හැකි හේතුව / විසඳුම |
|---|---|
| HUD බලය ක්රියාත්මක නොවේ. |
|
| වෙළුම පමණිtage is displayed, or no data in OBD mode. |
|
| Inaccurate fuel consumption readings. |
|
| HUD turns off after a few minutes. |
|
| GPS සංඥා නැත. |
|
| සංදර්ශකය ඉතා අඳුරු/දීප්තිමත්. |
|
7 පරිශීලක ඉඟි
- Accurate Fuel Consumption: For precise fuel consumption readings, remember to adjust the engine displacement in the HUD's settings to match your vehicle's engine size.
- අනුකූලතා පරීක්ෂාව: If your car is an older model (pre-2005 for European, pre-2008 for others) or you experience issues with OBD2 mode, utilize the GPS mode. It provides essential speed and driving data universally.
- Ambient Light Awareness: While the ambient light can be customized or turned off, be aware that it will always flash red during alarm conditions, ensuring you don't miss critical warnings.
- භාෂා සහාය: The device instructions and interface support multiple languages, allowing for easier setup and operation.
- Diesel Vehicle Use: The GPS mode is suitable for diesel vehicles, especially if OBD2 compatibility is uncertain for older diesel models.
8. නඩත්තු කිරීම
To ensure the longevity and optimal performance of your ESTINK P6 HUD, follow these maintenance guidelines:
- පිරිසිදු කිරීම: Gently wipe the display screen and exterior with a soft, dry, lint-free cloth. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the device.
- උෂ්ණත්වය: Do not expose the device to extreme temperatures (very hot or very cold) for extended periods. This can affect the internal electronics and screen.
- සම්බන්ධතා: Periodically check that all cables (OBD, USB) are securely connected and free from damage. Loose connections can lead to intermittent operation.
- ගබඩා: If storing the device for a long period, disconnect it from the vehicle and store it in a cool, dry place.
9. වගකීම් සහ සහාය
The ESTINK P6 Head-Up Display is manufactured by ESTINK. For any questions regarding product compatibility, technical support, or warranty claims, please contact the seller or manufacturer directly.
වගකීම් සම්බන්ධ ඕනෑම විමසීමක් සඳහා කරුණාකර ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.
