HIBREW Coffee Adapter Instruction Manual

1. හැඳින්වීම

This manual provides detailed instructions for the safe and effective use of your HIBREW Coffee Adapter. This adapter is designed to expand the compatibility of your HIBREW ST-504 H1&H1A coffee machine, allowing it to brew a wider variety of coffee formats.

2. නිෂ්පාදන ලක්ෂණ

The HIBREW Coffee Adapter is a versatile accessory for your HIBREW ST-504 H1&H1A coffee machine, offering compatibility with multiple coffee formats:

• ESE Coffee Pods (44mm)
• Nespresso® Capsules
• K-Cup Coffee Capsules
• Lavazza A Modo Mio® Capsules
• Lavazza Blue® Capsules
• Caffitaly® Capsules
• Instant Capsules (e.g., Dolce Gusto®)
• බිම් කෝපි

Each adapter type is specifically designed to ensure optimal extraction and flavor from your chosen coffee format.

3. පිරිවිතර

4. පිහිටුවීම සහ ස්ථාපනය

The HIBREW Coffee Adapter is designed for easy integration with your HIBREW ST-504 H1&H1A coffee machine. Ensure your machine is unplugged before installing or changing adapters.

1. නිවැරදි ඇඩැප්ටරය හඳුනා ගන්න: Select the adapter corresponding to the coffee format you wish to use (e.g., ESE pod, Nespresso capsule, ground coffee).
2. Open the Machine's Brewing Chamber: Lift the lever or open the lid of your HIBREW ST-504 H1&H1A coffee machine to access the brewing chamber.
3. ඇඩැප්ටරය ඇතුල් කරන්න: Carefully place the chosen coffee adapter into the brewing chamber. Ensure it sits securely and is properly aligned.
4. Close the Brewing Chamber: Close the machine's lid or lower the lever until it clicks into place, securing the adapter.

Visual Guide for Adapter Compatibility:

5. මෙහෙයුම් උපදෙස්

Once the correct adapter is installed, you can proceed with brewing your coffee.

1. ඇඩැප්ටරය සකස් කරන්න:
   • For Capsules/Pods: Insert your chosen coffee capsule (Nespresso, K-Cup, Lavazza, Caffitaly, Instant) or ESE pod into the respective adapter.
   • බිම් කෝපි සඳහා: Fill the ground coffee adapter with your desired amount of ground coffee, ensuring not to overfill. Tamp lightly if necessary.
2. Insert Prepared Adapter into Machine: If not already done during setup, place the adapter with the coffee into the HIBREW ST-504 H1&H1A machine's brewing chamber and close the lid/lever securely.
3. ස්ථාන කුසලානය: Position your coffee cup on the drip tray beneath the coffee spout.
4. Select Brew Size/Strength: Choose your desired brew size or strength setting on your HIBREW machine, if applicable.
5. පෙරීම ආරම්භ කරන්න: Press the brew button on your HIBREW machine to begin the brewing process.
6. ඔබේ කෝපි රසවිඳින්න: Once brewing is complete, remove your cup and enjoy your freshly brewed coffee.
7. භාවිතා කළ කෝපි ඉවත් කරන්න: After brewing, carefully open the machine, remove the adapter, and dispose of the used capsule, pod, or ground coffee.

Adapter Specific Visuals:

6. පිරිසිදු කිරීම සහ නඩත්තු කිරීම

Regular cleaning of your coffee adapter ensures optimal performance and hygiene.

1. එක් එක් භාවිතයෙන් පසු: Remove the adapter from the machine. Discard the used coffee capsule, pod, or grounds. Rinse the adapter under running water to remove any coffee residue.
2. ගැඹුරු පිරිසිදු කිරීම (සතිපතා/ද්වි-සතිපතා): For a more thorough clean, wash the adapter with warm, soapy water. Use a small brush to clean any hard-to-reach areas, especially the mesh filter in the ground coffee adapter.
3. වියළීම: Allow the adapter to air dry completely before storing or re-inserting into the machine.
4. උල්ෙල්ඛ පිරිසිදු කරන්නන් භාවිතා නොකරන්න: Avoid using harsh chemicals or abrasive sponges, as these can damage the adapter's surface.

7. දෝශ නිරාකරණය

If you encounter issues while using your HIBREW Coffee Adapter, refer to the following common problems and solutions:

• Coffee Not Brewing / Slow Flow:
  • Ensure the adapter is correctly seated in the machine.
  • Check if the coffee capsule/pod is properly inserted or if the ground coffee adapter is overfilled/too finely ground, causing blockages.
  • Clean the adapter thoroughly to remove any clogs.
• Leaking from Adapter:
  • Verify the adapter is correctly and securely closed within the machine's brewing chamber.
  • Ensure the capsule/pod is not damaged or improperly placed.
• දුර්වල කෝපි රසය:
  • Ensure the adapter is clean and free from old coffee residue.
  • Use fresh coffee capsules, pods, or ground coffee.
  • Check your HIBREW machine's water quality and descaling schedule.

8 පරිශීලක ඉඟි

• Always ensure you are using the correct adapter for your chosen coffee format to prevent damage and ensure proper brewing.
• For ground coffee, experiment with different grind sizes and tamping pressures to achieve your preferred taste and flow rate.
• Regularly clean all adapters to maintain coffee quality and extend product lifespan.

9. වගකීම් සහ සහාය

This HIBREW Coffee Adapter is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty details, please refer to the documentation provided with your original purchase or contact the seller directly.

For technical support, troubleshooting assistance, or inquiries regarding your adapter, please contact the retailer or manufacturer's customer service department.