අත්පොත්+

VPFET KVM Switch DP1.4 8K@60Hz USB3.0 2 in 2 out

VPFET KVM Switch DP1.4 8K@60Hz USB3.0 User Manual

Model: KVM Switch DP1.4 8K@60Hz USB3.0 2 in 2 out

1. හැඳින්වීම

The VPFET KVM Switch DP1.4 8K@60Hz USB3.0 2 in 2 out is designed to allow two computers to share two DisplayPort monitors and four USB devices (keyboard, mouse, USB disk, etc.). This device simplifies your workspace by enabling seamless switching between two systems with a single set of peripherals, supporting high-resolution video up to 8K@60Hz or 4K@120Hz.

VPFET KVM Switch front and back view with included cables and desktop controller

Figure 1: VPFET KVM Switch Overview (Front and Back Panels)

පැකේජයේ අන්තර්ගතය

  • KVM Switch Unit: 1
  • USB3.0 to Type-C Cable: 2
  • DC12V Power Adapter: 1
  • Wired Desktop Controller: 1
  • පරිශීලක අත්පොත: 1
Package contents of the KVM switch including the main unit, cables, power adapter, and desktop controller

රූපය 2: පැකේජයේ අන්තර්ගතය

2. පිරිවිතර

විශේෂාංගයවිස්තරය
වීඩියෝ ආදානය2 x DisplayPort 1.4 (Max 4K@60Hz per input)
වීඩියෝ ප්‍රතිදානය1 x DisplayPort 1.4 (Supports HDCP2.3)
USB Input (PC)2 x USB-C (for connecting to PCs)
USB Expansion Ports2 x USB 3.0 (5Gbps), 2 x USB 2.0 (480Mbps)
උපරිම විභේදනය8K@60Hz, 4K@120Hz (Backward compatible with 1080P)
ස්විච් පාලනයPanel button, External wired controller (1.5m cable)
බල සැපයුමDC12V/2A (5.5×2.0mm interface)
අනුකූල පද්ධතිWindows 7/10/11, macOS 10.15+, Ubuntu 18.04+
විශේෂ ලක්ෂණHDCP2.3 support, Industrial-grade stable power supply, Gold-plated interfaces, Anti-interference design, 2000V surge protection.
Display showing 8K60Hz Ultra High Definition resolution

Figure 3: High Definition Support (8K@60Hz, 4K@120Hz)

Diagram showing USB 2.0 ports for mouse and keyboard, and USB 3.0 ports for hard disk and flash disk with their respective speeds

Figure 4: USB Port Details (USB 2.0 and USB 3.0 High Speed)

3. සැකසුම් උපදෙස්

ඔබගේ KVM ස්විචය සම්බන්ධ කිරීමට මෙම පියවර අනුගමනය කරන්න:

  1. බල සම්බන්ධතාවය: Connect the DC12V power adapter to the KVM switch's DC12V port and then plug it into a power outlet.
  2. අධීක්ෂණ සම්බන්ධතාවය: Connect your DisplayPort monitors to the "DP1 OUT" and "DP2 OUT" ports on the back of the KVM switch.
  3. PC Video Input:
    • For PC1: Connect its DisplayPort outputs to the "DP1 IN" and "DP2 IN" ports under the "PC1 IN" section on the KVM switch.
    • For PC2: Connect its DisplayPort outputs to the "DP1 IN" and "DP2 IN" ports under the "PC2 IN" section on the KVM switch.
  4. PC USB Input:
    • For PC1: Use one of the provided USB3.0 to Type-C cables to connect a USB port on PC1 to the "USB C" port under "PC1 IN" on the KVM switch.
    • For PC2: Use the second USB3.0 to Type-C cable to connect a USB port on PC2 to the "USB C" port under "PC2 IN" on the KVM switch.
  5. පර්යන්ත සම්බන්ධතාවය:
    • Connect your USB keyboard and mouse to the "USB 2.0" ports (ports 1 and 2) on the front panel.
    • Connect USB storage devices (hard disk, flash disk) or other high-speed USB peripherals to the "USB 3.0" ports (ports 3 and 4) on the front panel.
  6. ඩෙස්ක්ටොප් පාලකය (විකල්ප): Plug the wired desktop controller into the "Control" jack on the front panel for remote switching.
  7. බල ගැන්වීම: Ensure all connections are secure, then turn on the KVM switch using the ON/OFF switch on the back panel.
Detailed wiring diagram for the KVM switch showing connections for two PCs, two monitors, and USB peripherals

Figure 5: KVM Switch Connection Diagram

Broad compatibility diagram showing Windows, macOS, Linux logos and a connection overview

Figure 6: Broad System Compatibility and Connection Overview

Video 1: KVM Switch Product Overview and Connection Guide

4. මෙහෙයුම් උපදෙස්

පරිගණක අතර මාරුවීම

The KVM switch offers two methods for switching between connected computers (PC1 and PC2):

  • ඉදිරිපස පුවරු බොත්තම: Press the "Select" button on the front panel of the KVM switch to toggle between PC1 and PC2. An LED indicator will show which PC is currently active.
  • Desktop Controller: Use the external wired desktop controller by pressing its button to switch between PC1 and PC2. This provides convenient switching without reaching for the KVM unit.
Image showing the KVM switch with two monitors and two PCs, highlighting the front panel with USB ports and the select button, and the desktop controller

Figure 7: Switching between PC1 and PC2 using the front panel button or desktop controller

Display Working Modes

The KVM switch supports two primary display working modes for your monitors:

  • දිගු කිරීමේ මාදිලිය: The two monitors function as a "Main screen" and an "Extend screen," providing an expanded desktop area.
  • අනුපිටපත් (කැඩපත්) මාදිලිය: Both monitors display the same content, functioning as a "Main screen" and a "Mirror screen."

These modes are typically configured within your operating system's display settings (e.g., Windows Display Settings, macOS System Settings).

Diagram illustrating Extend and Duplicate (Mirror) display working modes with two monitors

Figure 8: Extend and Duplicate Display Working Modes

5. නඩත්තු කිරීම

  • පිරිසිදු කිරීම: Use a soft, dry cloth to clean the surface of the KVM switch. Do not use liquid cleaners or aerosols.
  • වාතාශ්රය: අධික උනුසුම් වීම වැළැක්වීම සඳහා KVM ස්විචය හොඳින් වාතාශ්‍රය ඇති ප්‍රදේශයක තබා ඇති බවට වග බලා ගන්න. කිසිදු වාතාශ්‍රය විවරයක් අවහිර නොකරන්න.
  • බලය: Always use the provided DC12V/2A power adapter. Using an incorrect power adapter may damage the device.
  • කේබල් කළමනාකරණය: Keep cables organized and free from kinks or excessive bending to prevent signal degradation or damage.
  • පාරිසරික තත්ත්වයන්: උපාංගය අධික උෂ්ණත්වයට, ආර්ද්‍රතාවයට හෝ සෘජු හිරු එළියට නිරාවරණය කිරීමෙන් වළකින්න.

6. දෝශ නිරාකරණය

ගැටලුවවිය හැකි හේතුවවිසඳුම
No display on monitor after switching.
  • Loose DisplayPort cable connection.
  • Incorrect display settings on PC.
  • KVM switch not powered on.
  • PC not outputting video.
  • Check and re-secure all DisplayPort cables.
  • Verify display settings on the active PC (resolution, refresh rate, extend/duplicate mode).
  • Ensure the KVM switch is powered on and the LED indicator is lit for the selected PC.
  • Check PC's video output directly to a monitor.
යතුරුපුවරුව/මූසිකය ප්‍රතිචාර නොදක්වයි.
  • ලිහිල් USB කේබල් සම්බන්ධතාවය.
  • USB cable from PC to KVM not connected.
  • KVM switch not powered on.
  • Incompatible keyboard/mouse (rare).
  • Check and re-secure all USB cables, especially the USB-C cables from PCs to the KVM.
  • KVM ස්විචය ක්‍රියාත්මක කර ඇති බවට වග බලා ගන්න.
  • Try connecting the keyboard/mouse to different USB ports on the KVM.
  • Test keyboard/mouse directly with the PC.
USB 3.0 devices (e.g., external hard drive) not detected or unstable.
  • Insufficient power supply to the KVM.
  • Loose USB 3.0 cable connection.
  • Ensure the DC12V/2A power adapter is correctly connected and providing stable power.
  • Check and re-secure the USB 3.0 device cable.
  • Some high-power devices may require their own external power supply.
Video flickering or black screen when playing copyrighted content.HDCP අනුකූලතා ගැටළුව.The KVM switch supports HDCP 2.3. Ensure your source device and monitors also support HDCP 2.3 or a compatible version. Update graphics drivers if necessary.

7 පරිශීලක ඉඟි

  • USB-C for Data Only: The USB-C ports on the KVM switch are for connecting the USB data channels from your PCs to the KVM, enabling shared peripherals. They do not carry video signals; video input is exclusively via the DisplayPort inputs.
  • High Refresh Rates: While the KVM supports up to 8K@60Hz and 4K@120Hz, the actual refresh rate for lower resolutions like Full HD (1080p) will depend on your graphics card, monitor capabilities, and cable quality. The KVM itself is designed to pass through high refresh rates supported by DP1.4.
  • කේබල් ගුණාත්මකභාවය: For optimal performance, especially with high resolutions and refresh rates, use high-quality DisplayPort 1.4 cables and USB 3.0 cables.
  • බල ස්ථායිතාව: The KVM switch uses a DC12V/2A power adapter. Ensure it's always connected, especially when using power-hungry USB devices like external hard drives, to prevent disconnections or instability.

8. වගකීම් සහ සහාය

For any questions or issues not covered in this manual, please contact VPFET customer support. Keep your purchase receipt for warranty claims.

This product is designed for reliable operation. In the unlikely event of a defect, please refer to the seller's warranty policy for repair or replacement options.


VPFET 8K DisplayPort KVM Switch 2x2 for Dual Monitors and 2 PCs with USB 3.0

VPFET 8K DisplayPort KVM Switch 2x2 for Dual Monitors and 2 PCs with USB 3.0

0:29 • 1280×720 • විශේෂාංග_නිරූපණය

අදාළ ලියකියවිලි - KVM Switch DP1.4 8K@60Hz USB3.0 2 in 2 out

පෙරview USB-C HDMI DP KVM Switch Docking Station User Manual
User manual for the VPFET USB-C HDMI DP KVM Switch Docking Station, enabling control of dual computers and dual monitors with a single set of peripherals. Features include USB 3.2 Gen2, 100W PD charging, and support for up to 3840x2160@120Hz resolution.
පෙරview VPFET HD811 HDMI ශ්‍රව්‍ය නිස්සාරක පරිශීලක අත්පොත
Comprehensive user manual for the VPFET HD811 HDMI Audio Extractor. This guide covers features, detailed specifications, panel layout, connection diagrams, step-by-step setup instructions, audio mode selection, FireTV settings, and troubleshooting tips for optimal audio extraction from HDMI sources.
පෙරview 3-Channel Monitor KVM Switch 2x3 8K60Hz USB3.0 User Manual
User manual for the 3-Channel Monitor KVM Switch 2x3, supporting 8K60Hz resolution and USB 3.0. Provides features, specifications, connection diagrams, and troubleshooting guide for managing multiple computers and monitors.
පෙරview User Manual: 2-Port DisplayPort KVM Switch 8K60Hz USB3.0
User manual for the 2-Port DisplayPort KVM Switch with 8K60Hz and USB3.0 capabilities. This guide provides safety information, features, specifications, panel descriptions, connection diagrams, usage instructions, and troubleshooting tips for the KVM switch.
පෙරview StarTech.com SV231DPDDUA2 2-Port KVM Switch with Dual DisplayPort - 4K 60Hz User Manual
User manual for the StarTech.com SV231DPDDUA2 2-Port KVM Switch, detailing setup, operation, troubleshooting, and specifications for dual-monitor 4K 60Hz DisplayPort connectivity. Learn how to connect and manage two computers with this high-resolution KVM switch.