VEVOR Dent Repair Machine (GYSpot 2700/2600)

1. හැඳින්වීම

This manual provides detailed instructions for the safe and effective operation and maintenance of your VEVOR Dent Repair Machine, models GYSpot 2700 and GYSpot 2600. This versatile spot welder and dent puller is designed for professional vehicle panel repair, offering efficient solutions for various metal deformations.

VEVOR Dent Repair Machine with accessories — Figure 1: VEVOR Dent Repair Machine (GYSpot 2700) with included accessories.

2. ආරක්ෂිත උපදෙස්

WARNING: Always read and understand all safety warnings and instructions before operating this equipment. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

Ensure the machine is connected to a properly grounded power source.
වෙල්ඩින් හිස්වැසුම්, අත්වැසුම් සහ ආරක්ෂිත ඇඳුම් ඇතුළු සුදුසු පුද්ගලික ආරක්ෂක උපකරණ (PPE) පළඳින්න.
d හි යන්ත්‍රය ක්‍රියාත්මක නොකරන්නamp හෝ තෙත් තත්ත්වයන්.
ළමයින් සහ අනවසර පුද්ගලයින් වැඩ කරන ස්ථානයෙන් ඈත් කරන්න.
Ensure adequate ventilation to avoid inhaling fumes.
නඩත්තු කිරීමට හෝ උපාංග වෙනස් කිරීමට පෙර විදුලිය විසන්ධි කරන්න.
Avoid direct contact with live electrical parts.
Do not use the machine for purposes other than its intended use.

3. Package Contents & Components

Your VEVOR Dent Repair Machine comes with a comprehensive set of accessories to facilitate various repair tasks.

Diagram of all included accessories for the VEVOR Dent Repair Machine — Figure 2: Standard Configuration of accessories.

ඇතුළත් උපාංග:

Dent Puller Machine (GYSpot 2700 or GYSpot 2600)
වෙල්ඩින් තුවක්කුව
Dent Puller (Slide Hammer)
සම්බන්ධකය
Manual Suction Cup
Carbon Rods
Wavy Line Wire
Draw Hook
Carbon Rod Chuck
Round Meson
Meson Chuck
Triangular Meson
Spot Welding Head
OT Meson
යතුර
Six Claw Hook
Accessory Kit Storage Box

Diagram showing the welding gun and dent puller attachments — Figure 3: Dual Guns Interface, showing the welding gun and dent puller.

4. පිහිටුවීම

බිම් රැහැන් සම්බන්ධ කරන්න: Attach the ground wire to the designated terminal on the machine. Ensure a secure connection to the vehicle's metal body, away from the repair area.

Video Segment: Connecting the ground wire.

For first-time use, the machine can polish off the galvanized layer on the grounding head, or connect the ground several times to allow the galvanized layer to come off naturally.

Video Segment: Initial grounding process.
Connect Sheet Metal Gun: Attach the sheet metal gun to its designated port on the machine.

Video Segment: Connecting the sheet metal gun.
බල ගැන්වීම: Turn the power switch clockwise to boot the machine. Continue turning clockwise to increase power as needed.

Video Segment: Powering on and adjusting power.

5. මෙහෙයුම් උපදෙස්

The VEVOR Dent Repair Machine offers multiple welding modes and functions for various dent repair scenarios.

5.1 පාලන පැනලය අවසන්view

Control panel of the VEVOR Dent Repair Machine with numbered functions — Figure 4: Control Panel with 5 Welding Modes and Power Switch.

Triangular Meson Pull
Round Meson Pull
OT Meson Pull
Wave Line Welding
Carbon Rod to Close the Fire (Heating)
Power Switch & Regulation Knob
අතින්/ස්වයංක්‍රීය ස්විචය
Error Indication Light
බල දර්ශක ආලෝකය

Use the Power Switch & Regulation Knob (6) to adjust the power. The Manual/Automatic Switch (7) allows you to select between manual and automatic operation modes. Carbon rod heating is typically performed in manual mode.

Video Segment: Adjusting for pulling gun and welding meson piece.

5.2 Dent Pulling with Slide Hammer

For general dent pulling, attach the slide hammer to the welding gun. Spot weld the tip to the center of the dent, then use the slide hammer to pull the dent out.

Video Segment: Demonstrating the use of a slide hammer for dent repair.

5.3 Welding Pulling Rings

For larger or more complex dents, pulling rings can be welded onto the car body. Insert the pulling ring into the welding gun's chuck, place it on the dented area, and activate the weld. Repeat for multiple rings as needed, then use a puller bar with hooks to extract the dent.

Video Segment: Welding pulling rings onto the car body.

Video Segment: Pulling the dent using a hammer with welded rings.

5.4 Welding Wavy Wire

For curved areas or long, narrow dents, wavy wire can be used. Select the wavy wire welding mode on the control panel. Place the wavy wire along the dent and spot weld it in sections. Once welded, use a pulling tool to straighten the panel.

Video Segment: Welding wavy wire on curved areas.

5.5 Carbon Rod Heating (Shrinking)

To shrink stretched metal or finish a repair, use the carbon rod heating function. Select the carbon rod mode, insert a carbon rod into the welding gun, and apply heat to the desired area to shrink the steel sheet.

Video Segment: Using carbon rod heating to shrink the steel sheet.

6. නඩත්තු කිරීම

පිරිසිදු කිරීම: Regularly clean the machine and accessories, especially the welding gun tips and ground clamp, to ensure optimal conductivity and performance.
පරීක්ෂාව: Periodically inspect all cables, connections, and accessories for wear, damage, or loose fittings. Replace any damaged parts immediately.
සිසිලන පද්ධතිය: Ensure the side vents are clear of obstructions to allow for efficient heat dissipation.
ගබඩා: Store the machine and accessories in a dry, clean, and secure location when not in use. Use the provided compact toolbox for organizing accessories.

Image showing side vents for efficient cooling — Figure 5: Side vents for fast heat radiation.

7. දෝශ නිරාකරණය

ගැටලුව	විය හැකි හේතුව	විසඳුම
යන්ත්‍රය ක්‍රියාත්මක නොවේ	No power supply; loose power cable; tripped circuit breaker.	Check power connection; ensure power outlet is functional; reset circuit breaker.
දුර්වල වෙල්ඩින් කාර්ය සාධනය	Poor grounding; dirty welding tips; incorrect power setting; oxidized metal surface.	Ensure strong ground connection; clean welding tips; adjust power setting; clean the metal surface before welding.
අධික උනුසුම් දර්ශකය සක්‍රියයි	Prolonged use; blocked ventilation; excessive ambient temperature.	Allow machine to cool down; clear ventilation openings; operate in a cooler environment.
Dent pulling is ineffective	Insufficient power; improper attachment of pulling accessories; weak weld.	Increase power setting; ensure accessories are correctly attached and securely welded.

8. පිරිවිතර

GYSpot 2700

Model: GYS2700
වර්ණය: කහ
උපරිම ප්‍රතිදාන ධාරාව: 3500A
ආදාන වෙළුමtagඊ: 220V
ආදාන බලය: 2KW
Input Current Fuse: 16A
Work Model: 5 Modes Available
Single Side Welding Thickness: 0.02 - 0.05 in / 0.6 - 1.2 mm
Dimensions (L x W x H): 8" x 12.5" x 10" / 20.5 x 32 x 25.5 cm
බර: රාත්තල් 53.8 / 24.4 kg

Dimensions of the GYS2700 Dent Repair Machine — Figure 6: GYS2700 Machine Dimensions.

GYSpot 2600

Model: GYS2600
උපරිම ප්‍රතිදාන ධාරාව: 3500A
ආදාන වෙළුමtagඊ: 220V
සංඛ්යාතය: 60Hz
ආදාන බලය: 2KW
Input Current Fuse: 16A
Work Model: 5 Modes Available
Single Side Welding Thickness: 0.02 - 0.05 in / 0.6 - 1.2 mm
Dimensions (L x W x H): 8" x 12.5" x 10" / 20.5 x 32 x 25.5 cm
බර: රාත්තල් 53.8 / 24.4 kg

Dimensions of the GYS2600 Dent Repair Machine — Figure 7: GYS2600 Machine Dimensions.

9 පරිශීලක ඉඟි

මාදිලියේ වෙනස්කම්: The primary difference between the GYS2700 and GYS2600 models lies in their current output, with the GYS2700 having a current of 2700 and the GYS2600 having a current of 2600. Both models share many core features and accessories.
මතුපිට සකස් කිරීම: Always ensure the metal surface is clean and free of paint, rust, or grease before welding for optimal adhesion and repair quality.
පුහුණු වන්න: If you are new to dent repair, practice on scrap metal to get a feel for the machine's settings and techniques before working on your vehicle.

10. වගකීම් සහ සහාය

VEVOR provides a one-year warranty for this product. For any after-sales problems or technical support, please contact VEVOR customer service. Ensure you have your purchase details and model number ready when contacting support.

VEVOR is dedicated to providing tough equipment & tools at incredibly low prices, backed by 24/7 attentive service.

VEVOR GYSpot 2700 / GYSpot 2600