Upgrade XY7025 CNC Stabilized Voltagඊ බල සැපයුම් උපදෙස් අත්පොත

1. හැඳින්වීම

The Aideepen XY7025 is an advanced CNC Stabilized Voltage Power Supply Buck Converter designed for precise control of voltage and current. This module features Constant Voltage (CV), Constant Current (CC), and Constant Power (CP) modes, making it versatile for various applications including battery charging, laboratory power, and industrial control. It supports firmware upgrades, MPPT solar charging, and offers multiple communication interfaces for remote control and monitoring.

2. ආරක්ෂිත තොරතුරු සහ පූර්වාරක්ෂාවන්

• ආදාන බලය: The product cannot be connected to AC power. Do not connect to 220V utility power.
• ආදාන වෙළුමtagඊ සීමාව: උපරිම ආදාන පරිමාවtage must not exceed 90V. It is recommended to operate within 85V.
• ධ්රැවීයතාව: Ensure positive and negative poles are connected correctly. Reversing polarity can damage the device.
• බැටරි සම්බන්ධතාවය: When connecting a battery, ensure the power supply's output voltage සෑම විටම බැටරි වෝල්ටීයතාවයට වඩා ඉහළයි.tage. Alternatively, use a diode in series with the positive output terminal to prevent reverse current from the battery.
• පියවරෙන් පියවර මෙහෙයුම: This product is a step-down power supply. The maximum output voltage is approximately 94.5% of the input voltage.
• Professional Knowledge: Battery charging requires professional knowledge. Non-professionals should not attempt to charge directly to prevent fire and explosion.

3. නිෂ්පාදන අවසන්view

3.1 ප්රධාන ලක්ෂණ

• Silicone buttons with comfortable tactile feedback and indicator lights.
• Clear LCD screen with large, rounded fonts for easy readability.
• Integrated injection-molded, flame-retardant shell with double-layer buckle design for secure circuit board fixation.
• Supports standard Modbus protocol for serial communication.
• Firmware upgrade capability via WiFi module.
• Supports MPPT (Maximum Power Point Tracking) for solar charging.
• Upgraded PCB welded M3 terminals for higher current and lower heat.
• Comprehensive protection mechanisms: Input Under-Voltage (LVP), Output Over-Voltage (OVP), Output Over-Current (OCP), Output Over-Power (OPP), Over-Temperature (OTP), Over-Time Out (OHP), Over-Capacity (OAH), Over-Energy (OWH), External Temperature Protection (ETP).
• Independent dual serial ports (TTL and 485 communication).
• Network control via PC host computer or mobile APP (Sinilink for Android/iOS).
• Supports global weather systems and global WiFi time synchronization.
• 360° rotatable display for optimal viewing කෝණය.
• Compatible with other serial-enabled power supply devices (e.g., XY6020L, XY3607F, XY7025, XY12522).

3.2 සංරචක

• Input Common-Mode Inductors: Reduce input power ripple for low ripple output.
• High-Power, High-Temperature Iron-Silicon-Aluminum Magnetic Ring Inductors: Ensure stable performance.
• Intelligent Temperature-Controlled Fan: With large-area ventilation heat sinks for efficient cooling.
• Output 2-Stagඊ පෙරහන: For cleaner output.
• Power Switch (Hard Switch ON/OFF): For main power control.
• 10K NTC 3950B External Temperature Sensor Interface: For over-temperature protection.
• MPPT Hardware Switch: Activates MPPT function with an indicator light.
• 0.3-10V Analog Control Support: Measurement range configurable via software.

• Serial Communication Interface: Supports standard Modbus protocol.
• On-Board 485 Communication: For remote multi-machine control.
• MPPT ON/OFF Switch: Activates or deactivates MPPT mode.
• Current Dip Switches: Used to set constant current values in potentiometer mode.

4. පිරිවිතර

5. පිහිටුවීම

5.1 භෞතික සම්බන්ධතාවය

Connect the input power source to the IN+ and IN- terminals on the bare board. Connect your load or battery to the OUT+ and OUT- terminals. Ensure correct polarity for all connections. If charging a battery, consider adding an anti-backflow diode to the output.

For MPPT solar charging, connect a solar panel to the input and an external temperature probe to the NTC temperature probe interface. The battery icon will be displayed on the screen once the battery is connected.

5.2 සන්නිවේදන සැකසුම

The bare board supports serial communication and on-board 485 communication. These can be used simultaneously. For remote control via APP or web-based networking, connect a WiFi module to the serial port TTL level interface.

For low-cost multi-machine control, utilize the 485 bus control. Independent dual serial ports (serial port TTL and on-board 485) are available.

6. මෙහෙයුම් උපදෙස්

6.1 මූලික ක්‍රියාකාරිත්වය සහ සංදර්ශකය

The device features a rotary encoder for quick and smooth page navigation. The main UI displays voltage, current, power, and set values. Other UIs include capacity record, voltage/current curve, parameter settings, system parameter settings, and pairing UI.

The display color can be customized with 8 color options to create a unique style.

6.2 සැකසීම් වෙළුමtagඊ සහ ධාරාව

There are three ways to set voltagඊ සහ ධාරාව:

1. ඉක්මන් සැකසුම් මාදිලිය:
   • පරිමාව ඇතුළත් කිරීමට V-SET/I-SET බොත්තම කෙටියෙන් ඔබන්න.tage/ධාරා සැකසුම් මාදිලිය.
   • ඉලක්කම් අතර ගමන් කිරීමට SW බොත්තම හෝ සංකේතක බොත්තම භාවිතා කරන්න.
   • පරිමාව සකස් කිරීමට කේතකය කරකවන්න.tage/current value. Once set, press V-SET/I-SET briefly to save and exit.
2. කේතක ප්‍රකාරය:
   • පරාමිතිය සක්‍රිය කිරීමට කේතක බොත්තම කෙටියෙන් ඔබන්න (වෙළුමtage/current) ඔබට සැකසීමට අවශ්‍යයි.
   • Press the encoder button to switch between full selection and digit selection. In full selection, all digits are highlighted. Rotate the encoder to switch between setting voltage or current. In digit selection, the selected digit is highlighted. Rotate the encoder to adjust the value.
   • අවසන් කිරීමට, කේතක බොත්තම/SW බොත්තම තත්පර 2ක් අල්ලාගෙන සිටින්න, නැතහොත් කිසිදු බොත්තමක් එබීමෙන් තොරව තත්පර 6ක් රැඳී සිටින්න. සියලුම සැකසුම් ස්වයංක්‍රීයව සුරැකේ.
3. දුරස්ථ පාලන මාදිලිය:
   • Use an infrared remote control or 433M wireless remote control module to set voltage and current directly with the remote's numeric keypad.

6.3 CV CC CW Features

• ස්ථාවර වෙළුමtage (CV): බර ධාරාව නියමිත නියත ධාරා අගයට වඩා අඩු වූ විට, බල සැපයුම නියත පරිමාවකින් ක්‍රියාත්මක වේ.tage මාදිලිය, එහිදී ප්‍රතිදානය පරිමාවtage යනු කට්ටල පරිමාවයිtage value, and the current is adaptive.
• නියත ධාරාව (CC): When the load current is greater than the set constant current value, the power supply operates in constant current mode, where the output current is the set current value, and the voltage අනුවර්තී වේ.
• නියත බලය (CW): After enabling the constant power function, the constant current value defaults to the maximum value. The constant voltage value serves as the initial voltage (set to a reasonable value based on actual conditions). After the power supply is turned on, the equivalent resistance R of the load is calculated using Ohm's law R=U/I. Then, the corresponding voltage can be calculated based on the set constant power value using the power formula P=U²/R. At this point, the constant power point algorithm automatically follows, and the constant power is achieved.
  • නියත බල ස්විචය සහ නියත බල අගය සැකසීම:
    1. In the system parameter settings UI, select the CW option. Turn ON to enable constant power, and turn OFF to disable constant power.
    2. නියත බලය සක්‍රීය කිරීමෙන් පසු, නියත බලයේ අගය වෙනස් කිරීම සඳහා ප්‍රධාන අතුරු මුහුණතේ ISET කෙටියෙන් ඔබන්න.

6.4 Network Control and Group Control

The device supports LAN penetration for real-time communication and remote control via external networks. It also supports email notifications and cloud records. Control is possible through PC host computer software or the Sinilink mobile APP (Android/iOS).

The digital control panel supports one-to-many group control. By turning on the group control switch on the panel and using the 485 bus, you can collectively manage power supply activation/deactivation, voltage/current settings, achieving one-to-many control with simplicity and efficiency.

Activating Group Control Function: On the main power supply interface, briefly press the SW button to select the right status bar. Rotate the encoder to choose the group control switch activation icon, then briefly press the encoder button to open the selection dialog. Press the SW or encoder button to select and rotate the encoder to ON to enable group control mode. When setting voltage, current, or power on/off, the changes will automatically synchronize to all devices on the 485 bus (Note: Device addresses on the bus must be unique). Hold the SW button or wait 6 seconds without operation to exit and save settings automatically.

6.5 Universal Button Functions

• VSET බොත්තම: කෙටි ඔබන්න: පරිමාව සකසන්නtage CV. Long Press: Quickly call up data set M1.
• SW බොත්තම: Short Press: Enter quick settings. Long Press: Enable four-way screen rotation.
• ISET බොත්තම: Short Press: Set current CC. Long Press: Enter or exit the data group settings UI.
• කේතක බොත්තම: Short Press: Shift. Long Press: Lock the button.
• බල බොත්තම (සක්‍රිය/අක්‍රිය): Short Press: Turn power output on/off. Long Press: Shut down.

6.6 උසස් මෙහෙයුම්

• අගුළු කාර්යය: Hold the encoder button for more than 2 seconds to lock the buttons and prevent accidental changes. Hold again for more than 2 seconds to unlock.
• Quickly Recall Data Sets: Hold the V-SET button to quickly load the M1 data set. Select Data Set: Hold the I-SET button to open the data set selection window. Rotate the encoder to choose the data set you want. Then, either hold I-SET or briefly press the SW/encoder button to load the selected data set. The interface will show the currently loaded data set.
• Quickly Adjust System Parameters in the Status Bar: On the main screen, briefly press the SW button to select a status bar parameter. Rotate the encoder to switch between parameters. Briefly press the SW button or encoder button to adjust the parameter or open the parameter setting interface. Use the encoder to set the value. To save and exit, either hold the SW button/encoder button or wait 6 seconds without any button press. All settings are saved automatically.

6.7 Remote Control Demonstration

This video demonstrates various operations including smooth operation, setting voltage and current, checking accuracy, resetting capacity/energy/runtime, navigating data set and system parameters, and remote control functionality.

7. නඩත්තු කිරීම

• උපාංගය පිරිසිදුව හා දූවිලි වලින් තොරව තබා ගන්න.
• අධික උනුසුම් වීම වැළැක්වීම සඳහා නිසි වාතාශ්රය සහතික කරන්න.
• උපාංගය තෙතමනය හෝ අධික උෂ්ණත්වයට නිරාවරණය වීමෙන් වළකින්න.
• Regularly check connections for tightness and signs of wear.
• Store in a dry, cool environment when not in use.

8. දෝශ නිරාකරණය

• බලය නැත: ආදාන පරිමාව පරීක්ෂා කරන්නtage and connections. Ensure the power switch is ON.
• Output Not Stable: ආදාන පරිමාව තහවුරු කරන්නtage is within the specified range (12-85V). Check load connections.
• Protection Triggered: The device has various protection mechanisms (LVP, OVP, OCP, OPP, OTP, OHP, OAH, OWH, ETP). Check the display for error messages indicating which protection has been activated. Address the underlying cause (e.g., reduce load, check temperature).
• ස්ථිරාංග උත්ශ්‍රේණි කිරීමේ අසාර්ථකත්වය: Do not power off during the upgrade process. If it fails, press and hold the power button to force it into upgrade mode and retry.
• සංදර්ශක ගැටළු: Ensure connections to the display unit are secure.

9 පරිශීලක ඉඟි

• සංදර්ශකය අභිරුචිකරණය කිරීම: ඇඩ්වාන් ගන්නtage of the 8 color options to personalize your display for better visibility or aesthetic preference.
• Efficient Parameter Setting: Utilize the 'Encoder Mode' for precise adjustments of voltage and current, especially when fine-tuning is required.
• Data Set Management: Save frequently used voltage/current configurations into the 10 available data groups for quick recall, saving time during repetitive tasks.
• දුරස්ථ අධීක්ෂණය: For long-term projects or inaccessible setups, leverage the network control feature with the Sinilink APP to monitor and adjust parameters remotely.
• MPPT for Solar: When using solar panels, ensure the MPPT function is enabled and an external temperature probe is connected for optimal charging efficiency and battery protection.

10. වගකීම් සහ සහාය

For technical support, troubleshooting assistance, or warranty inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.