1. හැඳින්වීම
The CADDXFPV Eclipse Thermal Camera is an advanced thermal imaging solution designed for various applications, including FPV (First Person View) drones. This manual provides essential information for the proper setup, operation, and maintenance of your thermal camera system. Please read this manual thoroughly before using the product to ensure safe and optimal performance.
2 ආරක්ෂිත තොරතුරු
- Do not expose the camera to extreme temperatures, direct sunlight for prolonged periods, or corrosive environments.
- උපාංගය ප්රබල බලපෑම්වලට වැටීමෙන් හෝ යටත් කිරීමෙන් වළකින්න.
- නිවැරදි වෙළුම සහතික කරන්නtage is supplied to the device as specified in the 'Specifications' section. Incorrect voltage can cause permanent damage.
- උපාංගය ජලයෙන් හා තෙතමනයෙන් ඈත් කරන්න.
- Do not attempt to disassemble or modify the camera system. This will void the warranty and may cause damage.
- Use only original or approved accessories.
3. සංරචක අවසන්view
The CADDXFPV Eclipse Thermal Camera system typically includes the following main components:
- Thermal Camera Module: The primary unit responsible for capturing thermal images.
- Main Processing Unit: Handles video processing, power management, and interfaces.
- ඇන්ටනා: For video transmission (if applicable to your specific variant).
- සම්බන්ධක කේබල්: For power, video, and data transmission between modules.
4. පිරිවිතර
The following specifications apply to the Eclipse Camera-640HD model. Specifications may vary slightly for other variants (384, 256).
| විශේෂාංගය | විස්තර |
|---|---|
| අනාවරක වර්ගය | සිසිල් නොකළ වැනේඩියම් ඔක්සයිඩ් |
| විභේදනය | 256x192@12µm |
| තරංග ආයාම පරාසය | 8 ~ 14µm |
| NETD | ≤40mk @ F1 25°C |
| කාච | F1.0/4mm/50°(H)*37.2°(V)*62.3°(D) |
| රාමු අනුපාතය | 50 fps |
| බලශක්ති පරිභෝජනය | <1.5 ව |
| ප්රතිදානය | PAL |
| සැපයුම් වෙළුමtage | 5v~20v |
| කාච | 4 මි.මී |
| මෙහෙයුම් උෂ්ණත්වය | -20°C~60°C |
| ඇනලොග් අතුරුමුහුණත | CVBS |
| HD අතුරුමුහුණත | MIPI-CSI/Walksnail Avatar |
| ප්රමාදය | සාමාන්ය ප්රමාදය 20ms |
| රූපයේ ගුණාත්මකභාවය | AI Image Enhancement |
| ද්රව්ය | මල නොකන වානේ |
| Controllable Distance | 200~800 (units not specified, typically meters for FPV) |
5. සැකසීම සහ රැහැන්වීම
Carefully follow the wiring diagrams below to connect your CADDXFPV Eclipse Thermal Camera system. Incorrect wiring can damage the device and connected components.
5.1 UART සම්බන්ධතාවය
This connection is typically used for data communication, such as OSD (On-Screen Display) control or flight controller integration.
| පින් කරන්න | කාර්යය |
|---|---|
| TX2 | UART Transmit 2 |
| RX2 | UART Receive 2 |
| GND | බිම |
| 5V0 | 5V බල ප්රතිදානය |
5.2 Main Power and Video Output
This connection provides power to the unit and outputs the video signal. Ensure the power supply is within the specified voltage පරාසය (9V-26V).
| පින් කරන්න | කාර්යය |
|---|---|
| CVBS | ඇනලොග් වීඩියෝ ප්රතිදානය |
| Power 9V-26V | Main Power Input (9V to 26V) |
| GND | බිම |
| OSD | තිරය මත සංදර්ශක පාලනය |
| V-BUS | වෙළුමtage Bus (Power Output) |
සටහන: Always double-check your wiring before applying power to prevent damage to the camera or other electronic components.
6. මෙහෙයුම් උපදෙස්
6.1 බල ගැන්වීම
Once correctly wired, apply power within the specified voltage range (5V-20V for the camera module, 9V-26V for the main unit). The system should initialize, and thermal video output will be available via the CVBS (Analog) or MIPI-CSI/Walksnail Avatar (HD) interfaces.
6.2 වීඩියෝ ප්රතිදානය
The camera outputs a PAL video signal. Ensure your display device or video receiver is compatible with PAL format. The HD interface supports MIPI-CSI and Walksnail Avatar systems for high-definition thermal video.
6.3 Thermal Imaging
The camera utilizes an uncooled vanadium oxide detector to capture thermal radiation. The AI Image Enhancement feature helps improve the clarity and detail of the thermal feed. The latency is approximately 20ms, providing a responsive experience for FPV applications.
7. නඩත්තු කිරීම
- පිරිසිදු කිරීම: Gently clean the camera lens and housing with a soft, dry, lint-free cloth. Do not use abrasive cleaners or solvents.
- ගබඩා: කැමරාව සෘජු හිරු එළියෙන් සහ අධික උෂ්ණත්වයන්ගෙන් ඈත්ව සිසිල් වියළි ස්ථානයක ගබඩා කරන්න.
- පරීක්ෂාව: වයර් සහ සම්බන්ධක ක්ෂය වීමේ හෝ හානිවීමේ සලකුණු සඳහා නිතිපතා පරීක්ෂා කරන්න.
8. දෝශ නිරාකරණය
- බලය නැත: Check all power connections and ensure the supply voltage is within the specified range (9V-26V for the main unit). Verify that the power source is functioning correctly.
- වීඩියෝ ප්රතිදානය නැත: Confirm that the video output cable (CVBS or HD interface) is securely connected to your display device or video receiver. Ensure your display is set to the correct input and supports PAL format for analog output.
- දුර්වල රූපයේ ගුණාත්මකභාවය: Check for any obstructions on the camera lens. Ensure the camera is operating within its specified temperature range (-20°C to 60°C).
- අතරමැදි සංඥාව: Inspect antenna connections for tightness and ensure they are not damaged. Check for potential interference sources in your operating environment.
9 පරිශීලක ඉඟි
- For optimal thermal performance, allow the camera a few moments to stabilize after powering on, especially in varying ambient temperatures.
- Experiment with different mounting positions on your drone or platform to find the best field of view and minimize vibrations.
- Keep the lens clean to ensure clear thermal imagery. Dust or smudges can significantly degrade performance.
- When using the HD interface, ensure your digital FPV system (e.g., Walksnail Avatar) is updated to the latest firmware for best compatibility and features.
10. වගකීම් සහ සහාය
This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support, please reach out to the CADDXFPV customer service channels.
11. සම්බන්ධතා තොරතුරු
For further assistance or inquiries, please contact CADDXFPV customer support through their official webඅඩවිය හෝ බලයලත් බෙදාහරින්නන්.