1. හැඳින්වීම
The SpeedyBee Master 5 V1 V2 is a programmable WS2812 Cellular LED board designed for FPV drones. This 5V RGB LED offers customizable lighting options, making your drone stand out with bright and durable illumination. This manual provides essential information for the proper setup, operation, and maintenance of your LED board.
2. පිහිටුවීම සහ ස්ථාපනය
The SpeedyBee Master 5 LED board offers flexible connection options to your Flight Controller (FC).
2.1 සම්බන්ධතා ක්රම
You can connect the LED strip using two primary methods:
- Direct Plugging: Connect the LED strip directly to your FC via the provided connector.
- පෑස්සුම්: Solder the connection cable to the appropriate pads on your FC. This method supports both soldering and free-soldering configurations.
2.2 ESC Protection
A shockproof foam is included to protect the LED board from potential interference or damage from the Electronic Speed Controller (ESC). Ensure proper placement of this foam during installation.
3. මෙහෙයුම් උපදෙස්
The SpeedyBee Master 5 V1 V2 LED board features programmable WS2812 cellular LEDs, allowing for extensive customization of lighting patterns and colors. Configuration is typically done via your Flight Controller's software (e.g., Betaflight, EmuFlight, INAV) where you can define LED sequences, colors, and effects. Refer to your Flight Controller's documentation for specific software setup instructions for WS2812 LEDs.
3.1 බල ගැන්වීම සක්රිය / අක්රිය කිරීම
The LED board is powered directly from your Flight Controller's 5V output. It will illuminate when the FC receives power and is configured to control the LEDs.
3.2 අභිරුචිකරණය
Utilize your Flight Controller's configurator software to program desired LED patterns, colors, and responses to flight modes or events. Ensure the correct LED type (WS2812) and number of LEDs are selected in the software.
4. නඩත්තු කිරීම
To ensure the longevity and optimal performance of your SpeedyBee Master 5 V1 V2 LED board, follow these maintenance guidelines:
- පිරිසිදු කිරීම: Gently clean the LED board with a soft, dry brush or compressed air to remove dust and debris. Avoid using liquids or harsh chemicals.
- පරීක්ෂාව: Periodically inspect the solder joints and connections for any signs of damage or corrosion.
- ගබඩා: When not in use, store the LED board in a dry, anti-static environment.
- හැසිරවීම: Handle the board by its edges to avoid touching the electronic components, especially the LEDs, which can be sensitive to static discharge.
5. දෝශ නිරාකරණය
If you encounter issues with your LED board, consider the following troubleshooting steps:
- LEDs not lighting up:
- Check all connections to the Flight Controller (5V, GND, DIN) for proper seating and continuity.
- Verify that the Flight Controller is supplying 5V power to the LED output.
- Ensure the LED feature is enabled and correctly configured in your Flight Controller's software (e.g., Betaflight LED Strip tab).
- Confirm the correct number of LEDs and the WS2812 type are selected in the software.
- Incorrect colors or flickering:
- ලිහිල් සම්බන්ධතා හෝ හානි වූ වයර් තිබේදැයි පරීක්ෂා කරන්න.
- Ensure the data line (DIN) is properly connected and not experiencing interference.
- Review your Flight Controller's software configuration for any errors in LED setup.
- Partial LED failure:
- This may indicate a damaged LED or a break in the data line. Inspect the board for physical damage.
If problems persist after these steps, contact SpeedyBee support or your retailer for further assistance.
6. පිරිවිතර
Below are the detailed specifications for the SpeedyBee Master 5 V1 V2 Programmable WS2812 Cellular LED board:
6.1 සාමාන්ය
- ආදර්ශ අංකය: Master 5 V1 V2
- ද්රව්ය: ලෝහ
- ප්රමාණය: 1 pcs
- වාහන වර්ගය සඳහා: Airplanes (FPV Drones)
- Tool Supplies: Assembled class
- Four-wheel Drive Attributes: එකලස් කිරීම
- Remote Control Peripherals/Devices: ESC (for context, not part of the LED board itself)
- කොටස්/උපාංග උත්ශ්රේණි කරන්න: Programmable 2812 Cellular LED
- RC අමතර කොටස් සහ ගිණුම්: Programmable 2812 Cellular LED
- නිර්දේශිත වයස: අවුරුදු 14+
- භාවිතා කරන්න: වාහන සහ දුරස්ථ පාලක සෙල්ලම් බඩු
- සහතික කිරීම: CE
- විදුලි වේ: බැටරි නැත
- Is it battery/power supply: N
- Is it charger/adapter: N
- බැටරි ඇතුළත්ද: නැත
- ඉහළ සැලකිල්ලක් දක්වන රසායනික ද්රව්ය: කිසිවක් නැත
- ප්රමාණය: NA (Specific dimensions provided below)
6.2 මානයන් සහ බර
| මැනීම | වටිනාකම |
|---|---|
| පළල | 21 මි.මී |
| උස | 19 මි.මී |
| ඝනකම | 4.7 මි.මී |
| බර | 1 ග්රෑම් |
6.3 Lamp Beads Electrical Characteristics
Absolute Maximum Ratings (Temperature=25°C)
| පිරිවිතර | සංකේතය | පරාසය | ඒකකය |
|---|---|---|---|
| Logic power voltage | VDD | 3.0~7.5 | V |
| R/G/B output withstand voltage | Vds | 9 | V |
| තාර්කික ආදානය පරිමාවtage | VI1 | 0.5~5.5 | V |
| R/G/B output current | අවුට් | 12 | mA |
| වැඩ කරන උෂ්ණත්වය | Topr | -40~+85 | °C |
| ගබඩා උෂ්ණත්වය | Tstg | -50~+150 | °C |
| ESD ඔරොත්තු දෙන පරිමාවtage | Vesd | 5k | V |
Notice: Pulse width ≤0.1ms, duty ratio ≤1/10
Electrical Optical Characteristics (Temperature=25°C)
| පිරිවිතර | සංකේතය | අවම | ටයිප් කරන්න | උපරිම | ඒකකය |
|---|---|---|---|---|---|
| Chip working voltage | VDD | - | 5 | 7.5 | V |
| R/G/B output withstand voltage | Vds | - | - | 9 | V |
| R/G/B output drive current | Iou | - | 12 | - | mA |
| ඉහළ මට්ටමේ ආදාන පරිමාවtage | VIH | 0.7Vdd | - | - | V |
| අඩු මට්ටමේ ආදාන පරිමාවtage | VIL | - | - | 0.3Vdd | V |
| PWM සංඛ්යාතය | FPWM | - | 4 | - | KHZ |
| ස්ථිතික බලශක්ති පරිභෝජනය | ඇත්ත වශයෙන්ම | - | 0.3 | - | mA |
7 පරිශීලක ඉඟි
- පෙර පියාසර පරීක්ෂාව: Always perform a visual check of your LED connections before each flight to ensure they are secure.
- මෘදුකාංග වින්යාසය: Take time to explore the LED configuration options in your Flight Controller software. Many advanced features and effects can be unlocked with proper setup.
- බල සලකා බැලීම්: While the board operates on 5V, ensure your Flight Controller's 5V regulator can supply sufficient current for all connected LEDs, especially if you are using multiple LED strips.
8. වගකීම් සහ සහාය
For warranty information and technical support regarding your SpeedyBee Master 5 V1 V2 Programmable WS2812 Cellular LED, please refer to the official SpeedyBee website or contact the retailer from whom you purchased the product. Keep your proof of purchase for any warranty claims.
