TDA-08 Rail Type Weighing Force Transmitter Weight Sensor Signal Amplifier Analog User Manual

1. නිෂ්පාදන අවසන්view

The TDA-08 series is a versatile rail-type weighing force transmitter and weight sensor signal amplifier designed for industrial applications. It integrates force measurement, weighing, display, and control functions into a single compact unit. This device is suitable for various weighing and force measurement systems, providing accurate signal amplification and processing.

ප්රධාන ලක්ෂණ

• Integrates force measurement, weighing, display, and control functions.
• Internal integrated switching power supply, operating voltage පරාසය: 10V සිට 30V දක්වා.
• Equipped with an analog filtering function for stable readings.
• Automatic error diagnosis for easy identification and resolution of issues.
• Features automatic zero tracking.
• Supports automatic zeroing upon power-up.
• Configurable zero range and filter intensity.

2 ආරක්ෂිත තොරතුරු

Please read and understand all safety instructions before installation, operation, or maintenance of the TDA-08 series device. Failure to follow these instructions may result in injury or damage to the equipment.

• බල සැපයුම් පරිමාව සහතික කරන්නtage is within the specified range (10V-30V DC).
• All wiring should be performed by qualified personnel and in accordance with local electrical codes.
• කිසියම් සම්බන්ධතාවයක් ඇති කර ගැනීමට හෝ නඩත්තු කිරීමට පෙර විදුලිය විසන්ධි කරන්න.
• Avoid exposing the device to excessive moisture, dust, or extreme temperatures.
• Do not open the device enclosure unless specifically instructed to do so by a qualified technician.

3. ස්ථාපනය සහ සැකසුම

3.1 ඇසිරීම

Carefully remove the TDA-08 unit from its packaging. Inspect the device for any signs of physical damage. Retain the packaging for future transport or storage.

3.2 සවි කිරීම

The TDA-08 series is designed for rail mounting. Securely attach the device to a standard DIN rail in a suitable enclosure, ensuring adequate ventilation and protection from environmental factors.

3.3 රැහැන්

Refer to the terminal block labels on your specific TDA-08 model (TDA-08A, TDA-08B, or TDA-08C) for correct connections. Typical connections include:

• බල ආදානය: Connect 10V-30V DC power to the designated power terminals (e.g., +V, -V, GND).
• Load Cell/Sensor Input: Connect the load cell or weight sensor to the input terminals (e.g., E+, E-, S+, S-). Ensure correct polarity.
• ඇනලොග් ප්‍රතිදානය: Connect to external control systems or displays via analog output terminals (e.g., OUT, AO).
• ඩිජිටල් යෙදවුම්/ප්‍රතිදාන: If applicable, connect control signals to digital input (e.g., IN) and output (e.g., OUT1, OUT2, OUT3) terminals.

Always consult the detailed wiring diagram specific to your TDA-08 model and application. If unsure, seek assistance from a qualified electrician or system integrator.

3.4 ආරම්භක බල-අප්

After all connections are securely made, apply power to the device. The display should illuminate, and the device may perform an automatic zeroing sequence. Observe the display for any error messages or unexpected behavior.

4. මෙහෙයුම

The TDA-08 series features a digital display and control buttons for easy operation. Specific button functions may vary slightly between models (TDA-08A, TDA-08B, TDA-08C).

4.1 ප්‍රදර්ශනය අවසන්view

The digital display shows the current measured value (e.g., weight, force). Indicators (e.g., NET, PWAK, Kg, g, N, KN) provide additional status information.

4.2 Basic Weighing/Measurement

Once powered on and calibrated, the device will continuously display the measured value from the connected sensor. Place the item to be weighed or apply force to the sensor.

4.3 ශුන්ය කිරීම

To set the current reading to zero (e.g., to tare a container), press the ZERO button. The device supports automatic zero tracking and power-up zeroing.

4.4 ක්රමාංකනය

Calibration is crucial for accurate measurements. To enter calibration mode, typically press and hold the SET/CALI button. Follow the on-screen prompts to perform a multi-point calibration using known weights or force standards. Refer to the specific model's detailed instructions for the exact calibration procedure.

4.5 පරාමිතීන් සැකසීම

The device allows configuration of various parameters such as zero range, filter intensity, and output settings. Access the settings menu by pressing the SET/CALI button (or similar, depending on model). Use the navigation buttons (e.g., UP/DOWN arrows, SWITCH, OFTEN) to adjust values and confirm selections.

5. නඩත්තු කිරීම

The TDA-08 series is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure longevity and performance:

• පිරිසිදු කිරීම: Keep the device clean and free from dust and debris. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
• පරීක්ෂාව: Periodically inspect all wiring connections for tightness and signs of wear or corrosion.
• පරිසරය: මෙහෙයුම් පරිසරය නිශ්චිත උෂ්ණත්ව හා ආර්ද්‍රතා පරාසයන් තුළ පවතින බවට සහතික වන්න.
• නැවත ක්‍රමාංකනය: Recalibrate the device periodically or if you suspect measurement inaccuracies.

6. දෝශ නිරාකරණය

The TDA-08 series includes automatic error diagnosis to help identify and resolve common issues. If you encounter a problem, refer to the table below:

7. පිරිවිතර

මානයන් සහ බර

• Device Dimensions (L x H x D): 88mm x 53mm x 59mm (including rail mount)
• පැකේජ මානයන් (L x W x H): 23 cm x 11 cm x 7 cm
• පැකේජ බර: කිලෝ ග්රෑම් 0.8 කි

8 පරිශීලක ඉඟි

While specific user tips from reviews or Q&A are not available, here are some general recommendations for optimal use:

• For critical applications, always verify calibration regularly.
• If experiencing signal noise, ensure proper grounding of the system and use shielded cables for sensor connections.
• Keep a record of your calibration dates and any parameter changes.

9. වගකීම් සහ සහාය

For warranty information, technical support, or service inquiries, please contact your vendor or the manufacturer directly. Ensure you have your product model and serial number (if applicable) ready when contacting support.