1. හැඳින්වීම
The FNIRSI LPM-10 series is a multifunctional intelligent line finder, designed for measuring and locating network lines. It is an essential tool for network cabling, troubleshooting, and maintenance, offering ease of operation, powerful functions, high precision, and wide applicability. This manual provides detailed instructions for the FNIRSI LPM-10A model, helping network technicians and managers improve work efficiency and ensure normal network operation.
2 ප්රධාන ලක්ෂණ
- Professional Line Testing: Integrates line tracing, length testing, crimping testing, network cable speed testing, anti-interference capabilities, and port flashing functions.
- Anti-interference & Noise-Free Tracing: Advanced anti-interference technology reduces environmental noise, allowing precise cable location even in complex bundles.
- පරිශීලක හිතකාමී මෙහෙයුම: Features a 2.4-inch color screen, intuitive function indicator lights, and a sensitivity knob for simple and clear operation.
- Rich Customization: Allows users to set language, screen brightness, volume, and automatic shutdown preferences.
- නිවැරදි මිනුම්: Utilizes high-quality measurement technology for reliable data in network cable speed, length, and crimping tests.
3. පැකේජ අන්තර්ගතය
පහත සඳහන් සියලුම අයිතම ඔබේ පැකේජයට ඇතුළත් කර ඇති බව තහවුරු කර ගන්න:
- LPM-10A Main Unit (Transmitter)
- RJ45 ජාල කේබලය
- RJ11 Alligator Clip Test Cable
- RJ45 to RJ11 Adapter Cable
- Earpiece Cable
- Type-C ආරෝපණ කේබලය
- ගබඩා බෑගය
4. පිරිවිතර
සාමාන්ය පරාමිතීන්:
| පරාමිතිය | විස්තරය |
|---|---|
| නිෂ්පාදන ආකෘතිය | LPM-10A |
| තිර ද්රව්ය | අඟල් 2.4 වර්ණ තිරය |
| පසුතල ආලෝකය | සකස් කළ හැකි දීප්තිය |
| බල සැපයුම | TYPE-C (5V/1A) |
| බැටරි | 1500mAh ලිතියම් බැටරි |
| භාෂාව | චීන, ඉංග්රීසි |
| Product Size (LPM-10A) | ≈152 × 68 × 31mm |
Transmitter Functions (LPM-10A):
| කාර්යය | විස්තර |
|---|---|
| Network Cable Connection Test | RJ45 interface, Line Paring Check, Line Sequence and Fault Test, Error Prompt |
| Line Tracing Test | Normal Line Tracing, Anti-interference Line Tracing |
| Port Flashing | Full/Half Duplex Auto Identification, Auto-negotiation/Non-auto-negotiation Auto Identification |
| Network Cable Speed | 10M/100M/1000M, Duplex Mode (Full Duplex/Half Duplex) |
| PoE පරීක්ෂණය | Standard/Non-Standard, End-Span/Mid-Span/8-pin Power Supply Auto Identification, Power Supply Mode, Power Level |
| Crimping පරීක්ෂණය | RJ45-8 core |
| Length Measurement Accuracy | <20M: ±1.6M; 20M-100M: ±2.4M; >100M: ±3.2M |
| Line Withstand Voltagඊ ටෙස්ට් | 60V Withstand |
ග්රාහක කාර්යයන්:
- සංවේදීතාව ගැලපීම
- Wire Tracing Method: Normal/Anti-interference
- Wiring Sequence Comparison
- NCV Detection Function
- ෆ්ලෑෂ් ලයිට් කාර්යය
- අඩු වෙළුමtagඊ අනතුරු ඇඟවීම
- Headphone Function
Note: Optical Power Meter (OPM), Red Light Function, PING Test, and IP Scan are features specific to LPM-10B or LPM-10C models and are not available on the LPM-10A.
5. පිහිටුවීම
5.1 උපාංගය ආරෝපණය කිරීම
- Connect the provided Type-C charging cable to the Type-C port on the LPM-10A main unit.
- Connect the other end of the Type-C cable to a standard 5V/1A USB power adapter (not included).
- The battery indicator on the screen will show charging status. Ensure the device is fully charged before first use for optimal battery life.
5.2 බලය සක්රිය / අක්රිය
- To power on the main unit, press and hold the power button until the screen illuminates.
- බලය ක්රියා විරහිත කිරීමට, උපාංගය ක්රියා විරහිත වන තෙක් බල බොත්තම නැවත ඔබාගෙන සිටින්න.
- The receiver unit typically has a separate power button or rotary switch.
5.3 මූලික සැකසුම්
Navigate through the menu using the directional buttons and the 'M' button to access settings such as:
- භාෂාව: චීන සහ ඉංග්රීසි අතර තෝරන්න.
- තිරයේ දීප්තිය: විවිධ ආලෝකකරණ තත්ත්වයන් යටතේ ප්රශස්ත දෘශ්යතාව සඳහා සකසන්න.
- පරිමාව: Control the audio output for alerts and tracing signals.
- ස්වයංක්රීය වසා දැමීම: Set the idle time after which the device will automatically power off to save battery.
6. මෙහෙයුම් උපදෙස්
6.1 සාමාන්ය සංචලනය
The LPM-10A main unit features a 2.4-inch color screen and a set of navigation buttons. Use the arrow keys to move through menu options and the 'M' button to confirm selections or access specific functions.
6.2 Cable Test (Continuity, Wiremap, Fault)
- Connect one end of the RJ45 network cable to the main unit's RJ45 port.
- Connect the other end of the cable to the receiver unit's RJ45 port (or to the network device if testing a live connection).
- Select the "Cable Test" option from the main menu.
- The device will display the wiremap, continuity status, and identify any faults such as open circuits, short circuits, or crossed pairs.
6.3 Cable Tracing (Wire Tracing)
This function helps locate specific cables within a bundle or wall.
- Connect the network cable (RJ45) or telephone line (RJ11 via adapter) to the transmitter unit. For telephone lines, use the RJ11 Alligator Clip Test Cable.
- Ensure the cable is de-energized before using alligator clips.
- Switch the transmitter to "Trace" mode.
- Use the receiver unit to scan along the cable path. The receiver will emit an audible signal when it detects the traced cable.
- Adjust the sensitivity knob on the receiver to fine-tune detection. Increase sensitivity for weak signals, decrease for strong signals or to reduce interference.
6.4 වරාය දැල්වීම
This feature helps quickly identify the corresponding port on a network switch or router.
- Connect the LPM-10A main unit to a network cable connected to a switch.
- Select the "Port Flashing" function from the menu.
- The device will send a signal that causes the LED indicator on the connected switch port to flash, making it easy to locate.
6.5 Network Cable Speed Test
- Connect the network cable to be tested to the main unit.
- Select the "Network Speed Test" option.
- The device will automatically detect and display the network speed (10M/100M/1000M) and duplex mode (Full Duplex/Half Duplex).
6.6 PoE පරීක්ෂණය
The LPM-10A can detect Power over Ethernet (PoE) information.
- Connect the network cable between a host device and an active PoE switch to the LPM-10A.
- Select the "PoE Test" function.
- The device will quickly detect the PoE switch protocol (Standard/Non-Standard), power method (End-Span/Mid-Span/8-pin), and power level.
6.7 Crimping Test
This test verifies the proper crimping of RJ45 connectors.
- Insert the crimped RJ45 connector into the designated port on the main unit.
- Select the "Crimping Test" option.
- The device will check the RJ45-8 core connection. A green light or on-screen indicator typically signifies a good pin connection.
6.8 දිග මැනීම
Measure the length of network cables with high accuracy.
- Connect the cable to be measured to the main unit.
- Select the "Length" function from the menu.
- Perform a one-touch operation to get the precise cable length and identify any fault distances.
6.9 NCV Test (Non-Contact Voltage)
The receiver unit includes a Non-Contact Voltage (NCV) detection feature.
- Activate the NCV function on the receiver.
- Bring the receiver's probe near wires or electrical outlets.
- The device will detect live voltage and emit beeps to warn of potential shock risks.
7 පරිශීලක ඉඟි
- ආරක්ෂාව පළමුව: Always ensure cables are de-energized before using alligator clips for tracing to prevent damage to the device or personal injury.
- Optimize Tracing: When performing cable tracing, adjust the receiver's sensitivity carefully. In noisy environments, lower sensitivity might help isolate the signal, while in quiet areas, higher sensitivity can detect weaker signals.
- බැටරි කළමනාකරණය: Keep the device regularly charged, especially before critical tasks, to ensure uninterrupted operation and reliable measurements. The 1500mAh battery provides approximately 10 hours of running time.
- තිර දෘශ්යතාව: Utilize the adjustable backlight brightness feature to ensure clear readability of the 2.4-inch color screen in various lighting conditions.
8. නඩත්තු කිරීම
- පිරිසිදු කිරීම: උපාංගය පිරිසිදු කිරීම සඳහා මෘදු වියළි රෙද්දක් භාවිතා කරන්න. සී උපාංගයට හානි කළ හැකි උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්රාවක භාවිතා කිරීමෙන් වළකින්න.asing හෝ තිරය.
- ගබඩා: Store the LPM-10A and its accessories in the provided storage bag when not in use to protect it from dust, moisture, and physical damage.
- පාරිසරික තත්ත්වයන්: උපාංගය අධික උෂ්ණත්වයන්ට, අධික ආර්ද්රතාවයට හෝ සෘජු හිරු එළියට දිගු කාලයක් නිරාවරණය වීමෙන් වළකින්න.
- බැටරි සත්කාර: If storing the device for an extended period, ensure the battery is partially charged (around 50%) and recharge it every few months to prevent deep discharge.
9. දෝශ නිරාකරණය
- උපාංගය ක්රියාත්මක නොවේ:
- Check the battery level. Connect the device to a Type-C charger and ensure it's charging.
- Ensure the power button is pressed and held correctly.
- Inaccurate Cable Test Readings:
- Verify that the RJ45 connectors are properly seated in both the main unit and receiver.
- Inspect the cable for visible damage or poor crimps.
- Ensure the cable type (e.g., Cat5e, Cat6) is appropriate for the test.
- No Signal During Cable Tracing:
- Confirm the transmitter is powered on and in "Trace" mode.
- Increase the sensitivity on the receiver unit.
- Ensure the cable is correctly connected to the transmitter.
- Thick shielding or heavy interference can reduce tracing effectiveness.
- තිර සංදර්ශක ගැටළු:
- Adjust the screen brightness in the device settings.
- තිරය ප්රතිචාර නොදක්වයි නම් හෝ කැටි වී ඇත්නම්, උපාංගය නැවත ආරම්භ කිරීමට උත්සාහ කරන්න.
10. වගකීම් සහ සහාය
FNIRSI products undergo strict quality inspection. If you encounter any issues or require assistance with your LPM-10A Network Cable Tester, please contact FNIRSI customer support. Refer to your purchase documentation for specific warranty terms and contact information.
