විශ්ව කාර් දුරස්ථ මධ්‍යම කට්ටල උපදෙස් අත්පොත

1. හැඳින්වීම

This manual provides detailed instructions for the installation, operation, and maintenance of your Universal Car Remote Central Kit. This system is designed to provide convenient keyless entry and central locking functionality for compatible 12V vehicle models. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. නිෂ්පාදන අවසන්view

The Universal Car Remote Central Kit enhances your vehicle's security and convenience by allowing you to lock and unlock doors remotely. It typically includes a main control unit (host), a wiring harness, and two remote control key fobs.

2.1 සංරචක

• 1 x Main Control Unit (Host)
• 1 x රැහැන් පටි
• 1 x LED Indicator
• 2 x Remote Control Key Fobs
• 1 x English Manual (this document)

3. පිරිවිතර

The following table details the technical specifications of the Universal Car Remote Central Kit:

4. ස්ථාපනය සහ සැකසුම

Warning: Installation of this product requires knowledge of automotive electrical systems. Incorrect installation can damage your vehicle's electrical system or the product itself. Professional installation is highly recommended.

4.1 පූර්ව ස්ථාපන පිරික්සුම් ලැයිස්තුව

• Ensure your vehicle is a 12V system.
• Disconnect the vehicle's battery before starting any wiring.
• Identify the central locking system wires in your vehicle (lock, unlock, power, ground, accessory).
• Have appropriate tools: wire strippers, crimpers, multimeter, electrical tape, zip ties.

4.2 Wiring the Control Unit

The main control unit connects to your vehicle's central locking system via the provided wiring harness. Each wire in the harness has a specific function. Refer to the wiring diagram (if provided separately with your kit) or consult a professional auto electrician.

සාමාන්‍ය රැහැන් මාර්ගෝපදේශ:

• Power (Red wire): නියත +12V බල ප්‍රභවයකට සම්බන්ධ කරන්න.
• බිම් (කළු වයර්): ඝන චැසි බිම් ස්ථානයකට සම්බන්ධ කරන්න.
• Accessory (Yellow wire): Connect to a +12V accessory wire that is active when the ignition is on.
• Lock/Unlock Wires: These will connect to your vehicle's central locking motor wires. The specific configuration (positive trigger, negative trigger, or direct motor control) depends on your vehicle's system.
• LED දර්ශකය: Connect the LED indicator to the designated output on the control unit for visual status.
• Tailgate Release (if applicable): Connect the tailgate release wire to your vehicle's tailgate release mechanism.

4.3 Remote Control Pairing (Learning Type)

The remote controls are typically pre-paired. If new remotes are needed or existing ones lose pairing, follow the learning procedure:

1. Locate the learning button on the main control unit (often a small button on the side or inside the casing).
2. Turn the ignition to the 'ACC' or 'ON' position.
3. Press and hold the learning button on the control unit until the LED indicator flashes or you hear a beep.
4. Press any button on the remote control you wish to pair. The LED should confirm successful pairing (e.g., a single flash or beep).
5. Repeat for any additional remote controls.
6. Turn off the ignition to exit learning mode.

5. මෙහෙයුම

Once installed and configured, operating the keyless entry system is straightforward using the remote control key fobs.

5.1 දුරස්ථ පාලන කාර්යයන්

• අගුළු බොත්තම (🔒): Press once to lock all vehicle doors. The vehicle's turn signals may flash once to confirm.
• අගුළු ඇරීමේ බොත්තම (🔓): Press once to unlock all vehicle doors. The vehicle's turn signals may flash twice to confirm.
• Tailgate Release Button (often an open trunk icon): Press and hold (or press twice, depending on configuration) to open the vehicle's tailgate or trunk.

5.2 LED දර්ශකය

The LED indicator provides visual feedback on the system's status:

• මන්දගාමී ෆ්ලෑෂ්: System is armed (doors locked).
• වේගවත් ෆ්ලෑෂ්: Indicates a door is ajar or system is in a specific mode (refer to detailed wiring diagram for specific interpretations).
• අක්රිය: System is disarmed (doors unlocked) or vehicle is in use.

6. නඩත්තු කිරීම

6.1 දුරස්ථ පාලක බැටරි ප්‍රතිස්ථාපනය

The remote control key fobs use a CR2032 3V coin cell battery. If the remote's range decreases or it stops responding, the battery may need replacement.

1. දුරස්ථ පාලකය ප්‍රවේශමෙන් විවෘත කරන්න casing using a small flat-head screwdriver or a prying tool.
2. Note the orientation of the old battery.
3. පැරණි CR2032 බැටරිය ඉවත් කරන්න.
4. Insert a new CR2032 3V battery with the positive (+) side facing up (or as indicated by the remote's design).
5. දුරස්ථ පාලකය සවි කරන්න casing ආරක්ෂිතව නැවත එකට සම්බන්ධ කරන්න.

6.2 සාමාන්‍ය රැකවරණය

• පාලන ඒකකය සහ දුරස්ථ පාලක වියළිව තබා ගන්න සහ අධික උෂ්ණත්වයන්ගෙන් ඈත් කර තබන්න.
• Avoid dropping the remote controls or exposing them to strong impacts.
• Periodically check wiring connections for corrosion or looseness, especially after vehicle maintenance.

7. දෝශ නිරාකරණය

If you encounter issues with your Universal Car Remote Central Kit, refer to the following troubleshooting guide:

If problems persist after attempting these solutions, please consult a qualified automotive technician.

8 පරිශීලක ඉඟි

Based on general best practices for car keyless entry systems, here are some tips for optimal use:

• නිතිපතා පරීක්ෂා කරන්න: Periodically test all remote functions (lock, unlock, tailgate) to ensure the system is working correctly.
• Keep Remotes Safe: Store spare remote controls in a secure location, and avoid exposing active remotes to water or extreme heat.
• බැටරි ආයු කාලය: Be mindful of the remote control battery life. If you notice a decrease in range, it's a good indication to replace the battery soon.
• වෘත්තීය ස්ථාපනය: For complex vehicle electrical systems, always opt for professional installation to prevent damage and ensure correct functionality.

9. වගකීම් සහ සහාය

වගකීම් තොරතුරු, තාක්ෂණික සහාය හෝ සේවා විමසීම් සඳහා, කරුණාකර විකුණුම්කරුගේ නිශ්චිත නියමයන් සහ කොන්දේසි වෙත යොමු වන්න හෝ මිලදී ගැනීමේ ස්ථානය අමතන්න. මිලදී ගැනීම පිළිබඳ සාක්ෂියක් ලෙස ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.