CONENTOOL 6" Electric Chainsaw User Manual

1. හැඳින්වීම

Thank you for choosing the CONENTOOL 6" Electric Chainsaw. This cordless, ergonomic mini chainsaw is designed for efficient branch pruning and light woodworking tasks. Its lightweight design and powerful motor make it suitable for various gardening and DIY projects. Please read this manual thoroughly before operation to ensure safe and effective use of the product.

2 ආරක්ෂිත තොරතුරු

Your safety is paramount. Always follow these safety guidelines:

• Always wear appropriate personal protective equipment (PPE), including safety glasses, gloves, and hearing protection, when operating the chainsaw.
• Ensure the safety lock is engaged when the chainsaw is not in use or during maintenance.
• Keep hands and body clear of the chain when the tool is powered on.
• තෙත් තත්වයන් යටතේ හෝ දැවෙන ද්‍රව හෝ වායූන් අසල දම්වැල් කියත ක්‍රියාත්මක නොකරන්න.
• වැඩ කරන ප්‍රදේශයෙන් ළමයින් සහ අවට සිටින අය ආරක්ෂිත දුරින් තබා ගන්න.
• The chainsaw features multiple protection mechanisms: short circuit, overtemperature, overcurrent, overload, and overvoltage. Do not attempt to bypass these features.
• The 120° kickback protection and anti-drop chain technology are designed to enhance safety during operation.
• The anti-slip handles provide a secure grip.

3. පැකේජ අන්තර්ගතය

කරුණාකර පහත අයිතම සඳහා පැකේජය පරීක්ෂා කරන්න:

• 1 x Chainsaw (bare tool)
• 1 x Charger (21 V 0.5 A)
• 1 x උපදෙස් අත්පොත
• 2 x Batteries (2.0 Ah, quantity may vary based on purchase)
• 2 x දාම
• 1 x මාර්ගෝපදේශ තීරුව
• 1 x ඉස්කුරුප්පු නියනක්
• 1 x තෙල් කෑන්
• 1 x ආරක්ෂිත ආවරණය
• 1 x Plastic Case

4. පිරිවිතර

5. සැකසුම් උපදෙස්

Follow these steps to assemble your chainsaw:

1. Remove the Sprocket Cover: Turn the yellow button counterclockwise and remove the sprocket cover.
2. Install the Chain onto the Guide Bar: Place the chain around the guide bar, ensuring the knife of the chain faces forward.
3. Align Holes and Fit the Cover: Align the holes on the guide bar with the chainsaw body and fit the sprocket cover back into place.
4. ගෙඩිය තද කරන්න: Place the chain horizontally and put the cover on. Tighten the nut.
5. දාම ආතතිය සකසන්න: After installation, tighten the screws to adjust the tightness of the chain. The chain should be tight enough that you can pull out approximately three teeth.
6. බැටරිය ඇතුල් කරන්න: Insert the charged battery pack into the slot at the bottom of the chainsaw handle.
7. සම්පූර්ණ ස්ථාපනය: Put on the protective cover to complete the installation.

Video: Chainsaw Installation and Operation

This video demonstrates the installation process, chain tension adjustment, battery insertion, and basic operation of the CONENTOOL 6" Electric Chainsaw.

6. මෙහෙයුම් උපදෙස්

1. වැඩ කරන ප්‍රදේශය සකස් කරන්න: Clear the area of any obstacles and ensure good footing.
2. බැටරිය ඇතුළු කරන්න: බැටරිය සම්පූර්ණයෙන්ම ආරෝපණය වී ඇති බවත් දම්වැල් කියතට ආරක්ෂිතව ඇතුළු කර ඇති බවත් සහතික කර ගන්න.
3. දම්වැල ආරම්භ කරන්න: To start the chainsaw, you must simultaneously press the safety lock button and the speed change button (trigger). Release the safety lock once the chain starts moving.
4. කැපීම: Hold the chainsaw firmly with one hand (or two for better control, especially for larger branches). Position the chain against the material to be cut and apply gentle pressure. Allow the saw to do the work.
5. Observe Cutting Speed: The chainsaw can cut logs with a diameter of 15 cm in approximately 8-10 seconds, thanks to its high chain speed of up to 10.5 m/s.
6. තනි අතේ මෙහෙයුම: The lightweight design (approx. 1 kg) allows for comfortable one-handed operation for smaller tasks.

7. නඩත්තු කිරීම

Proper maintenance ensures the longevity and performance of your chainsaw:

• බැටරි ආරෝපණය: Charge the battery promptly after each use to avoid deep discharge, which can prevent activation. The battery features short circuit, overtemperature, overcurrent, overload, and overvoltage guards.
• දාම ආතතිය: Regularly check and adjust the chain tension. Use the provided screwdriver to turn the screw (clockwise to tighten, counterclockwise to loosen) until the chain is appropriately taut (you should be able to pull out about three teeth).
• දාම ලිහිසි කිරීම: Use the provided oil can to lubricate the chain regularly to reduce friction and wear.
• පිරිසිදු කිරීම: After each use, clean the chainsaw body, guide bar, and chain to remove sawdust, debris, and resin. Ensure the ventilation slots are clear for proper heat dissipation.
• ගබඩා: Store the chainsaw and its accessories in the provided plastic case in a dry, secure place, away from children.

8. දෝශ නිරාකරණය

• දම්වැල ආරම්භ නොවේ:
  • බැටරිය සම්පුර්ණයෙන්ම ආරෝපණය වී ඇති අතර නිසි ලෙස ඇතුල් කර ඇති බවට සහතික වන්න.
  • Verify that both the safety lock and the trigger are pressed simultaneously to start.
  • Check for any obstructions around the chain or motor.
• Chain is loose or too tight:
  • Refer to the 'Adjust Chain Tension' step in the Setup or Maintenance section.
• දුර්වල කැපුම් කාර්ය සාධනය:
  • Check if the chain is dull and needs sharpening or replacement.
  • Ensure the chain tension is correct.
  • Verify the battery is sufficiently charged.
• අධික උනුසුම් වීම:
  • වහාම ක්‍රියාකාරිත්වය නවත්වන්න.
  • දම්වැල් කියත් සිසිල් වීමට ඉඩ දෙන්න.
  • Check if the heat dissipation vents are blocked and clean them if necessary.

9 පරිශීලක ඉඟි

• ප්‍රශස්ත බැටරි ආයු කාලයක් සඳහා, නැවත ආරෝපණය කිරීමට පෙර බැටරිය සම්පූර්ණයෙන්ම බැස යාමෙන් වළකින්න.
• Always keep a spare charged battery on hand for extended work sessions.
• When cutting, let the chainsaw's speed and sharpness do the work; avoid forcing it through wood.
• Regularly inspect the chain for damage or dullness to maintain cutting efficiency and safety.
• The compact size makes this chainsaw ideal for reaching tight spaces or for users who prefer a lighter tool.

10. වගකීම් සහ සහාය

වගකීම් තොරතුරු, තාක්ෂණික සහාය හෝ සේවා විමසීම් සඳහා, කරුණාකර ඔබේ සිල්ලර වෙළෙන්දා හෝ නිෂ්පාදකයා සෘජුවම අමතන්න. මිලදී ගැනීම පිළිබඳ සාක්ෂියක් ලෙස ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.