AMAZON CON4 Sauna Stove Controller Instruction Manual

1. හැඳින්වීම

This manual provides detailed instructions for the installation, operation, and maintenance of the AMAZON CON4 Sauna Stove Controller. Please read this manual thoroughly before installation and use to ensure safe and efficient operation of your sauna heater.

2 ආරක්ෂිත තොරතුරු

WARNING: Electrical installation should only be performed by a qualified electrician in accordance with all local and national electrical codes.

• Always disconnect power to the sauna heater before performing any installation, maintenance, or troubleshooting.
• Do not operate the controller with wet hands or in wet conditions.
• සියලුම සම්බන්ධතා ආරක්ෂිත සහ නිසි ලෙස පරිවරණය කර ඇති බවට සහතික වන්න.
• Keep the control panel and control box away from water and high humidity.
• This device is intended for controlling sauna stoves. Do not use it for other purposes.

3. පැකේජ අන්තර්ගතය

සියලුම අයිතම පැකේජයේ ඇති බව තහවුරු කරගන්න:

• AMAZON CON4 Control Panel
• Control Box (Power Unit)
• Temperature Probe Cable

4. පිරිවිතර

5. ස්ථාපනය සහ සැකසුම

Proper installation is crucial for the safe and effective operation of the sauna stove controller. It is highly recommended that installation be performed by a certified electrician.

5.1 සංරචක හඳුනාගැනීම

ප්‍රධාන සංරචක සමඟ ඔබව හුරු කරවන්න:

• පාලන පුවරුව: The user interface for setting time and temperature.
• පාලක පෙට්ටිය: The main power unit that connects to the sauna heater and power supply.
• උෂ්ණත්ව පරීක්ෂණය: Measures the room temperature in the sauna.

5.2 රැහැන් සම්බන්ධතා

The control box handles the main electrical connections to the sauna heater and the power supply. The control panel connects to the control box, and the temperature probe connects to the control panel.

1. සවි කිරීම: Securely mount the control box and control panel in appropriate locations. The control panel should be easily accessible to the user, while the control box can be mounted in a less visible, but well-ventilated area.
2. බල සැපයුම: Connect the main power supply to the control box. Ensure the voltage and current ratings match your sauna heater and local electrical standards.
3. Sauna Heater Connection: Connect the sauna heater's power cables to the designated terminals within the control box.
4. පාලක පැනල සම්බන්ධතාවය: Connect the control panel to the control box using the provided cable.
5. Temperature Probe Installation: Install the temperature probe inside the sauna room, typically on a wall at a recommended height (refer to your sauna heater's manual for specific placement). Connect the temperature probe cable to the designated port on the control panel.

CAUTION: Incorrect wiring can lead to electric shock, fire, or damage to the equipment. Always consult a professional for electrical installation.

6. මෙහෙයුම් උපදෙස්

The CON4 control panel features an intuitive interface for managing your sauna experience.

6.1 පාලන පැනලය අවසන්view

පාලක පැනලයට ඇතුළත් වන්නේ:

• ඩිජිටල් සංදර්ශක: Two displays show "Time Remaining" and "Room Temperature".
• බොත්තම්:
  • වේලාව සකසන්න: Adjusts the sauna operating time.
  • උෂ්ණත්වය සකසන්න: Adjusts the desired sauna room temperature.
  • Mode A/B: Selects between different operating modes (details may vary, refer to specific sauna heater manual).
  • ආලෝකය සක්රිය / අක්රිය: Controls the sauna room lighting.
  • සක්‍රිය/අක්‍රිය: Powers the sauna heater on or off.
  • ඉහළ/පහළ ඊතල: Used to increase or decrease time and temperature settings.

6.2 මූලික මෙහෙයුම

1. බලය සක්රිය / අක්රිය: ඔබන්න සක්‍රිය/අක්‍රිය button to turn the sauna heater system on or off.
2. වේලාව සැකසීම:
   1. ඔබන්න වේලාව සකසන්න බොත්තම.
   2. භාවිතා කරන්න ඉහළ/පහළ ඊතල to adjust the desired operating time.
   3. The display will show the remaining time during operation.
3. උෂ්ණත්වය සැකසීම:
   1. ඔබන්න උෂ්ණත්වය සකසන්න බොත්තම.
   2. භාවිතා කරන්න ඉහළ/පහළ ඊතල to adjust the desired room temperature.
   3. සංදර්ශකය වත්මන් කාමර උෂ්ණත්වය පෙන්වයි.
4. Controlling Light: ඔබන්න ආලෝකය සක්රිය / අක්රිය button to toggle the sauna room light.
5. මාදිලිය තේරීම: If your sauna heater supports multiple modes, press the Mode A/B ඒවා අතර මාරු වීමට බොත්තම.

7. නඩත්තු කිරීම

Regular maintenance ensures the longevity and proper functioning of your sauna stove controller.

• පිරිසිදු කිරීම: Wipe the control panel with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• පරීක්ෂාව: සියලුම රැහැන් සම්බන්ධතා තද බව සහ ගෙවී යාමේ හෝ හානිවීමේ සලකුණු සඳහා වරින් වර පරීක්ෂා කරන්න.
• පරිසරය: Ensure the control panel and control box are kept in a dry environment, free from excessive dust or moisture.

WARNING: Always disconnect power before cleaning or inspecting the control box or any electrical components.

8. දෝශ නිරාකරණය

If you encounter issues with your sauna stove controller, try the following basic troubleshooting steps:

• බලය නැත:
  • Check the main power supply to the control box.
  • සියලුම විදුලි සම්බන්ධතා ආරක්ෂිත බව සහතික කර ගන්න.
  • බව තහවුරු කරන්න සක්‍රිය/අක්‍රිය බොත්තම තද කර ඇත.
• වැරදි උෂ්ණත්ව කියවීම:
  • Ensure the temperature probe is correctly installed and connected to the control panel.
  • Check for any obstructions around the temperature probe that might affect its reading.
• Sauna Heater Not Heating:
  • Verify that the desired temperature is set higher than the current room temperature.
  • Check the operating time setting; ensure sufficient time is allocated.
  • Confirm that the sauna heater itself is functioning correctly (refer to the sauna heater's manual).

අඛණ්ඩ ගැටළු සඳහා, කරුණාකර පාරිභෝගික සහාය අමතන්න.

9 පරිශීලක ඉඟි

To enhance your sauna experience and ensure the longevity of your equipment:

• For optimal sauna experience, allow the sauna heater to preheat for at least 30-60 minutes before use.
• Always ensure proper ventilation in the sauna room.
• Regularly check the sauna stones and replace them if they are cracked or crumbling.

10. වගකීම් සහ සහාය

10.1 වගකීම් තොරතුරු

The AMAZON CON4 Sauna Stove Controller comes with the following warranty:

• Main Electrical Components: One (1) year free warranty from the date of purchase for material and quality issues. This warranty does not cover accessories or other non-electrical parts.
• තාපන නල: Three (3) months or ninety (90) days warranty.

The company reserves the right to choose between repair or replacement. Any returns for repair must be pre-approved by the company. Return shipping costs are the responsibility of the customer.

වගකීම් වලින් ඇති වන හානි ආවරණය නොකෙරේ:

• Incorrect use or operation.
• Negligence or accidental breakage.
• Improper power connection.
• Modification or repair by unauthorized personnel.

After the warranty period, paid repair services are available, covering material costs for parts and travel expenses.

10.2 පාරිභෝගික සහාය

For any questions, technical assistance, or warranty claims, please contact us:

• WhatsApp: +86 155766507
• විද්‍යුත් තැපෑල: 1434250503@qq.com
• WeChat: 15576650740