හැඳින්වීම
Thank you for choosing the Orion 7829 EQ-3M Single-Axis Telescope Drive. This precision mini-motor is designed to enhance your astronomical observations by providing automatic tracking of celestial objects when attached to a compatible equatorial mount. This manual will guide you through the proper setup, operation, and maintenance of your new drive to ensure optimal performance and longevity.
නිෂ්පාදනය අවසන්view
The Orion 7829 EQ-3M Single-Axis Telescope Drive is an electronic motor drive that provides regulated sidereal-rate tracking in right ascension. It is specifically designed to attach to your AstroView equatorial mount, allowing for hands-free tracking of stars and other celestial bodies as they move across the night sky. The included drive controller offers variable speeds for precise adjustments.
ප්රධාන ලක්ෂණ:
- Precision mini-motor for automatic celestial object tracking.
- Electronic motor drive for regulated sidereal-rate tracking in right ascension.
- Drive controller with 2x and 8x speeds for fine adjustments.
- Pause mode for temporary tracking cessation.
- Compatible with AstroView equatorial mounts.
Image: The Orion 7829 EQ-3M Single-Axis Telescope Drive, showing the motor unit, hand controller, and battery case.
පැකේජයේ අන්තර්ගතය
ස්ථාපනය සමඟ ඉදිරියට යාමට පෙර සියලුම සංරචක පවතින බව කරුණාකර තහවුරු කරගන්න:
- Orion 7829 EQ-3M Single-Axis Motor Unit
- අත් පාලකය
- Battery Case (requires four D-cell batteries, not included)
- Hex keys for installation
සැලසුම
1. බැටරි ස්ථාපනය
- බැටරි ආවරණය විවෘත කරන්න.
- Insert four D-cell batteries (not included) into the battery case, ensuring correct polarity.
- බැටරි ආවරණය ආරක්ෂිතව වසා දමන්න.
2. Attaching the Motor Unit
- Locate the Right Ascension (RA) fine tuner shaft on your AstroView equatorial mount.
- Slide the hollow cylinder of the motor unit over the RA fine tuner post.
- Align the small hex nut on the motor unit's cylinder with the groove on the RA fine tuner post.
- Tighten the hex nut using the provided hex key to couple the motor drive to the RA fine tuner. Ensure it is snug to prevent slipping, but do not overtighten.
- Attach the motor unit to the mount using the designated attachment points and hex key.
3. Connecting the Hand Controller and Battery Case
- Connect the cable from the motor unit to the designated port on the hand controller.
- Connect the cable from the battery case to the designated power input on the hand controller.
- සියලුම සම්බන්ධතා ආරක්ෂිත බව සහතික කර ගන්න.
4. Initial Checks and Polar Alignment
- කලින් viewing, ensure the N/S switch on the hand controller is set to the correct hemisphere (e.g., "N" for Northern Hemisphere). This switch can be easily bumped, so always verify its position.
- For effective tracking, your equatorial mount must be properly polar aligned. Refer to your telescope mount's manual for detailed polar alignment procedures. A more accurate polar alignment will result in better tracking performance.
- Ensure the RA fine tuner is positioned to allow for full range of motion before starting your viewing session. If the RA fine tuner reaches its limit, you will need to manually reset it.
මෙහෙයුම් උපදෙස්
1. Powering On and Sidereal Tracking
Once the motor unit, hand controller, and battery case are connected, and batteries are installed, the drive is ready for operation. The motor will begin tracking at the sidereal rate automatically when powered on, assuming the N/S switch is correctly set.
2. අත් පාලකය භාවිතා කිරීම
The hand controller allows for precise adjustments to the tracking speed:
- 2x Speed: Press the 2x button to temporarily increase or decrease the tracking speed by a factor of two. This is useful for centering objects in the eyepiece.
- 8x Speed: Press the 8x button for faster adjustments, increasing හෝ අඩු කිරීමasing the tracking speed by a factor of eight. Use this for larger positional changes.
- විරාම මාදිලිය: The controller may include a pause function to temporarily stop tracking without powering down the unit.
- දිශානුගත පාලනය: Use the directional buttons (often labeled + and - or arrows) in conjunction with the 2x or 8x speed buttons to move the telescope east or west in Right Ascension.
When making adjustments, especially with the 8x speed, be aware that there might be a slight lag or overshoot when releasing the button. With practice, you will develop a feel for these minor characteristics.
3. Clutch Mechanism
The motor unit features a spring-loaded clutch. This allows for quick disengagement of the motor, enabling manual coarse adjustments to the Right Ascension via the mount's control knob. To re-engage, simply release the clutch. Ensure the thumb screw on the mount shaft is kept as loose as possible while maintaining functionality to prevent gear slipping.
නඩත්තු කිරීම
බැටරි කළමනාකරණය
The drive operates on four D-cell batteries. Battery life can vary, but expect approximately 2-2.5 hours of continuous use before performance may degrade. It is highly recommended to use rechargeable D-cell batteries and to carry spare charged batteries for extended viewing sessions. Low battery power can cause timing inaccuracies and lag.
සාමාන්ය සත්කාර
- Keep the motor unit and controller clean and free from dust and moisture.
- Store the unit in a dry, temperate environment when not in use.
- Avoid dropping or subjecting the unit to harsh impacts.
දෝෂගවේෂණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| Motor not tracking or moving |
|
|
| Drive gear slips |
|
|
| Inaccurate tracking or object drifts out of view ඉක්මනින් |
|
|
| Lag or overshoot when using 2x/8x speed buttons | සාමාන්ය මෙහෙයුම් ලක්ෂණය. | Practice using the speed controls to develop a feel for the response time. Approach targets from the positive direction to minimize overshoot. |
| RA fine tuner reaches limit | The RA worm gear has reached its end of travel. | Manually reset the RA fine tuner to its central position before starting a viewing session. This may require temporarily disengaging the motor. |
පිරිවිතර
- ආදර්ශ අංකය: 7829
- වර්ගය: Single-Axis Motor Drive
- ගැළපුම: ඇස්ට්රෝView Equatorial Mounts
- ලුහුබැඳීමේ අනුපාතය: සයිඩ්රියල්
- Control Speeds: 2x, 8x (relative to sidereal rate)
- බලශක්ති ප්රභවය: 4 x D-cell batteries (6 Volts total)
- අයිතමයේ බර: ආසන්න වශයෙන් පවුම් 1.35 (කිලෝ ග්රෑම් 0.61)
- පැකේජ මානයන්: ආසන්න වශයෙන් 9.9 x 7.4 x 2.6 අඟල් (25.1 x 18.8 x 6.6 cm)
- වර්ණය: කළු
- නිෂ්පාදකයා: ඔරියන්
- UPC: 759270078294
වගකීම් සහ සහාය
වගකීම් තොරතුරු සහ තාක්ෂණික සහාය සඳහා, කරුණාකර නිල ඔරියන් වෙත යොමු වන්න. webවෙබ් අඩවියට පිවිසෙන්න හෝ ඔවුන්ගේ පාරිභෝගික සේවා දෙපාර්තමේන්තුවට කෙලින්ම සම්බන්ධ වන්න. මිලදී ගැනීමේ සාක්ෂියක් ලෙස ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.
Orion Customer Service: කරුණාකර පිවිසෙන්න www.telescope.com සම්බන්ධතා තොරතුරු සහ සහාය සම්පත් සඳහා.
