Viper 479V Responder Remote Instruction Manual

1. නිෂ්පාදන අවසන්view

The Viper 479V Responder Remote is designed as an additional or replacement remote for compatible Viper security and remote start systems. It features up to 1/2 mile range and a premium SST LCD display for clear communication with your vehicle's system.

Image: Viper 479V Responder Remote. This image displays the front of the remote, highlighting its LCD screen and four control buttons.

ප්රධාන ලක්ෂණ:

• ද්වි-මාර්ග සන්නිවේදනය: Provides visual and audible confirmation when commands are sent successfully.
• විස්තීරණ පරාසය: Operates with up to 1/2 mile range.
• LCD සංදර්ශකය: Premium SST LCD display for clear vehicle monitoring with priority icons.
• Four-Button Control: Allows for remote locking, unlocking, and starting of your vehicle.

2. පද්ධති අනුකූලතාව

This Viper 479V Responder Remote is compatible with the following Viper security and remote start systems:

• Viper 591XV
• Viper 690XV
• Viper 790XV
• Viper 791XV
• වයිපර් 542V
• වයිපර් 434V
• වයිපර් 554V
• වයිපර් 564V

Please verify your existing system's model number to ensure compatibility before programming.

3. Setup: Programming the Remote

To program your new Viper 479V Responder Remote to your vehicle's security system, follow these steps carefully. The programming process requires locating your vehicle's Valet/Programming button, which is typically installed in the vehicle itself, not on the remote.

1. Locate Valet/Programming Button: Identify the Valet/Programming button in your vehicle. Its location can vary, but it is often found under the dashboard, near the fuse box, or in the glove compartment.
2. වාහනය සූදානම් කරන්න:
   • Open the driver's side door.
   • ජ්වලනයට යතුර ඇතුල් කරන්න.
   • Turn the key to the "ON" position. Do not start the engine; the dash lights should illuminate.
3. ක්‍රමලේඛන ආකාරය ඇතුළත් කරන්න:
   • For systems with remote start: Within 5 seconds of turning the key to "ON", press the Valet/Programming button once, then press and අල්ලාගෙන සිටින්න it. The car's siren will chirp once, indicating entry into programming mode.
   • For systems without remote start: Press the Valet/Programming button twice, then press and අල්ලාගෙන සිටින්න it. The car's siren will chirp once.
4. වැඩසටහන් දුරස්ථ පාලකය: While continuing to hold the Valet/Programming button, press the "UNLOCK" button on your new Viper 479V remote once. You will hear another chirp from the vehicle's siren, and the remote may beep, confirming successful programming.
5. ක්‍රමලේඛන මාදිලියෙන් පිටවන්න: Release the Valet/Programming button. Turn the key to the "OFF" position and remove it from the ignition.
6. පරීක්ෂණ දුරස්ථ පාලකය: Test all functions of your new remote (lock, unlock, remote start if applicable) to ensure proper operation. If the remote does not function as expected, carefully repeat the programming steps from the beginning.

If you encounter difficulties, consult your vehicle's specific alarm system manual or contact a professional installer.

4. Operating the Remote

The Viper 479V Responder Remote provides intuitive control over your vehicle's security and remote start features through its four-button layout and LCD display.

මූලික කාර්යයන්:

• අගුල: Press the lock button to arm your vehicle's security system and lock the doors.
• අගුළු ඇරීම: Press the unlock button to disarm your vehicle's security system and unlock the doors.
• දුරස්ථ ආරම්භය: Press the remote start button to remotely start your vehicle (if equipped and configured).
• සහායක කාර්යයන්: Additional buttons may control auxiliary features depending on your system's installation.

The LCD display provides visual feedback on your vehicle's status, such as door lock status, alarm triggers, and remote start confirmation. Priority icons on the display offer a quick overview of important vehicle information.

5. නඩත්තු කිරීම

බැටරි ආදේශනය:

The Viper 479V remote requires AAA බැටරි දෙකක් for operation. When the remote's display dims or its range decreases, it is time to replace the batteries.

1. දුරස්ථ පාලකයේ පිටුපස බැටරි මැදිරි කවරය සොයා ගන්න.
2. Carefully slide or unclip the cover to open the compartment.
3. පැරණි AAA බැටරි ඉවත් කරන්න.
4. නිවැරදි ධ්‍රැවීයතාව (+/-) සහතික කරමින්, නව AAA බැටරි දෙකක් ඇතුළු කරන්න.
5. බැටරි මැදිරි ආවරණය ආරක්ෂිතව ප්රතිස්ථාපනය කරන්න.

රැකවරණය සහ හැසිරවීම:

• ජලයට නිරාවරණය වීමෙන් වළකින්න: This remote is not waterproof. Exposure to water or high humidity can cause damage and lead to malfunction.
• බිංදු වලින් ආරක්ෂා කරන්න: While durable, repeated drops or impacts can damage the internal electronics or the LCD screen.
• මෘදු ලෙස පිරිසිදු කරන්න: Use a soft, dry cloth to clean the remote. Avoid harsh chemicals or abrasive materials.
• උෂ්ණත්ව අන්ත: Avoid exposing the remote to extreme temperatures, such as direct sunlight in a closed vehicle for extended periods.

6. දෝශ නිරාකරණය

If you experience issues with your Viper 479V Responder Remote, consider the following troubleshooting steps:

• දුරස්ථ පාලකය ප්‍රතිචාර නොදක්වයි:
  • AAA බැටරි පරීක්ෂා කර ප්‍රතිස්ථාපනය කරන්න.
  • Ensure you are within the operating range of the vehicle.
  • Verify that the remote is properly programmed to your vehicle's system (refer to Section 3).
• අඩු කළ පරාසය:
  • බැටරි ප්රතිස්ථාපනය කරන්න.
  • දුරස්ථ පාලකය සහ වාහනය අතර සැලකිය යුතු බාධා නොමැති බවට වග බලා ගන්න.
• LCD සංදර්ශක ගැටළු:
  • If the display is dim or blank, replace the batteries.
  • If the display is physically damaged, the remote may need replacement.
• බොත්තම් ක්‍රියා නොකරයි:
  • Ensure the remote is clean and free of debris around the buttons.
  • If specific buttons consistently fail, the remote may be worn out and require replacement.
• Accidental Test Mode: Some remotes may have a small 'P' button on the back that can accidentally trigger a test mode. If this occurs, removing and reinserting the battery may reset the remote.

For persistent issues, it is recommended to consult a professional Viper installer or the product's support resources.

7. පිරිවිතර

8. වගකීම් තොරතුරු

The Viper 479V Responder Remote comes with a වසර 1ක නිෂ්පාදක වගකීම. මෙම වගකීම් සහතිකය සාමාන්‍ය භාවිතය යටතේ ද්‍රව්‍ය හා වැඩ කිරීමේ දෝෂ ආවරණය කරයි. වගකීම් හිමිකම් සඳහා කරුණාකර ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.

For specific details regarding warranty coverage and claims, refer to the documentation provided with your original Viper security system or contact Viper customer support.

9. සහාය

For further assistance, technical support, or inquiries not covered in this manual, please refer to the following resources:

• වයිපර් නිල Webඅඩවිය: Visit the official Viper website for product updates, FAQs, and additional support documentation.
• Professional Installer: Contact the authorized Viper dealer or installer who installed your security system for expert assistance.
• පාරිභෝගික සේවාව: Refer to your product packaging or the Viper webපාරිභෝගික සේවා සම්බන්ධතා තොරතුරු සඳහා අඩවිය.