Watts SVGE10 Pre-Cut Clear Vinyl Tubing

1. නිෂ්පාදන අවසන්view

The Watts SVGE10 Pre-Cut Clear Vinyl Tubing is designed for various applications requiring flexible, clear, and durable fluid transfer. Made from plasticized Polyvinyl Chloride, it offers the flexibility of rubber and the clarity of glass. Its smooth, dense bore maximizes flow and minimizes sediment buildup. This tubing is resistant to acids, alkalis, and many solvents, making it suitable for a wide range of chemicals, gases, and liquids. It is certified to NSF 61 section 9 Clean Drinking Water standard, though it is explicitly stated not for use with ice makers.

ප්රධාන ලක්ෂණ:

• Pre-cut clear vinyl tubing.
• 3/8-Inch OD x 1/4-Inch ID x 10 foot length.
• Polyvinyl chloride construction provides flexibility and glass-like clarity.
• Handles a wide variety of chemicals, gas, and liquids, with excellent resistance to acids, alkalis, and many solvents.
• Not for use with ice makers.

2. පිහිටුවීම සහ ස්ථාපනය

This clear vinyl tubing is designed for ease of use in various fluid transfer applications. Ensure the tubing is compatible with the intended fluid and pressure requirements before installation.

ස්ථාපන පියවර:

1. සම්බන්ධතා ස්ථාන සකස් කරන්න: Ensure that the barb fittings or connection points are clean and free from debris. The tubing is designed to expand perfectly over standard barb fittings of appropriate size.
2. Cut to Length (if necessary): If a shorter length is required, use a sharp utility knife or tubing cutter to make a clean, straight cut. Avoid jagged edges that could compromise the seal.
3. නල අමුණන්න: Gently push the tubing over the barb fitting. For a tighter fit, you may briefly warm the end of the tubing in warm water to increase flexibility. Ensure the tubing is fully seated over the barb to create a secure, leak-proof connection.
4. ආරක්ෂිත සම්බන්ධතා (විකල්ප නමුත් නිර්දේශිත): For high-pressure applications or added security, use hose clamps (not included) to further secure the tubing to the fittings.
5. Route the Tubing: Route the tubing to avoid sharp bends or kinks that could restrict flow. The tubing's flexibility allows for various routing configurations.
6. කාන්දුවීම් සඳහා පරීක්ෂණය: After installation, slowly introduce the fluid and carefully inspect all connections for any signs of leaks.

වැදගත් සටහන: This tubing is not recommended for use with ice makers due to specific material requirements for such applications.

3. මෙහෙයුම් මාර්ගෝපදේශ

Once installed, the Watts SVGE10 Clear Vinyl Tubing operates passively as a conduit for fluid transfer. Observe the following guidelines for optimal performance:

• දියර අනුකූලතාව: Verify that the fluid being transferred is compatible with PVC material to prevent degradation of the tubing.
• උෂ්ණත්ව පරාසය: Ensure the operating temperature of the fluid remains within the tubing's specified range of 23°F to 149°F (-5°C to 65°C).
• පීඩන සීමාවන්: Do not exceed the maximum working pressure of the tubing (20 PSI to 60 PSI, depending on temperature and application) to prevent bursting or leaks.
• දෘශ්‍ය පරීක්ෂාව: Periodically check the clear tubing for any signs of discoloration, cloudiness, or sediment buildup, which may indicate a need for cleaning or replacement.
• ගැටීම් වලින් වළකින්න: Ensure the tubing is not kinked or pinched during operation, as this can restrict flow and potentially damage the tubing.

4. නඩත්තු කිරීම

Regular maintenance helps prolong the life and effectiveness of your vinyl tubing.

• පිරිසිදු කිරීම: If sediment or discoloration is observed, disconnect the tubing and flush it with an appropriate cleaning solution compatible with PVC and the transferred fluid. Rinse thoroughly with clean water.
• පරීක්ෂාව: Routinely inspect the entire length of the tubing for cracks, abrasions, hardening, or any signs of wear. Pay close attention to connection points for potential leaks.
• ගබඩා: If storing the tubing, ensure it is clean, dry, and coiled loosely to prevent kinks. Store in a cool, dry place away from direct sunlight and extreme temperatures.

5. දෝශ නිරාකරණය

Common issues with vinyl tubing are usually related to installation or environmental factors.

• සම්බන්ධතා වල කාන්දුවීම්:
  • Ensure tubing is fully seated on the barb fitting.
  • Check for proper hose clamp installation and tightness (if used).
  • Inspect the tubing end for damage or improper cuts. Recut if necessary.
• අඩු වූ ප්‍රවාහය:
  • Check for kinks or sharp bends in the tubing. Reroute if needed.
  • Inspect for internal blockages or excessive sediment buildup. Clean the tubing as described in the Maintenance section.
• Tubing Hardening/Cracking:
  • This can occur due to prolonged exposure to incompatible chemicals, extreme temperatures, or UV light. Replace the tubing if signs of degradation are present.

6. පිරිවිතර

7. නිෂ්පාදන මාධ්‍ය

නිෂ්පාදන රූපය:

Image of the Watts SVGE10 Pre-Cut Clear Vinyl Tubing, showing its transparent material and coiled form.

8. වගකීම් සහ සහාය

වගකීම් තොරතුරු:

වොට්ස් නියාමක සමාගම ("සමාගම") සෑම නිෂ්පාදනයක්ම මුල් නැව්ගත කළ දින සිට වසරක කාලයක් සඳහා සාමාන්‍ය භාවිතය යටතේ ද්‍රව්‍ය හා වැඩ කිරීමේ දෝෂ වලින් තොර බවට සහතික වේ. වගකීම් කාලය තුළ එවැනි දෝෂ ඇති වුවහොත්, සමාගම තම අභිමතය පරිදි, ගාස්තුවකින් තොරව නිෂ්පාදනය ප්‍රතිස්ථාපනය කිරීම හෝ නැවත සකස් කිරීම සිදු කරයි.

පාරිභෝගික සහාය:

For technical assistance, troubleshooting, or warranty claims, please contact Watts customer support. Refer to the product packaging or the official Watts webනවතම සම්බන්ධතා තොරතුරු සඳහා අඩවිය.

Webඅඩවිය: www.watts.com