හැඳින්වීම
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your EBARA 50DWXU6.75S2 DOMINATOR Manual Sewage Pump. Please read this manual thoroughly before installation or operation to ensure proper use and to prevent injury or damage.
The EBARA 50DWXU6.75S2 is a robust 1 HP sewage pump designed for reliable performance in demanding applications, featuring stainless steel construction for durability.
ආරක්ෂිත තොරතුරු
WARNING: Failure to follow these instructions may result in serious injury or death.
- Always disconnect power before servicing or installing the pump.
- සියලුම විදුලි සම්බන්ධතා දේශීය කේත සහ රෙගුලාසි වලට අනුකූල වන බවට සහතික වන්න.
- Do not operate the pump in explosive atmospheres.
- ස්ථාපනය සහ නඩත්තු කිරීමේදී සුදුසු පුද්ගලික ආරක්ෂක උපකරණ (PPE) පළඳින්න.
- This pump is designed for sewage and effluent. Do not use for flammable liquids or potable water.
සැකසුම සහ ස්ථාපනය
Proper installation is critical for the pump's performance and longevity. Consult a qualified professional if you are unsure about any step.
පෙර-ස්ථාපන පිරික්සුම් ලැයිස්තුව:
- Verify power supply matches pump requirements (1 x 230V).
- Ensure adequate space for pump placement and maintenance access.
- Inspect the pump for any shipping damage.
ස්ථාපන පියවර:
- ස්ථානගත කිරීම: Place the pump on a solid, level surface in the sump or basin. Ensure it is not resting directly on sludge or debris.
- විසර්ජන නල: Connect the discharge piping to the pump's outlet. Use a check valve to prevent backflow and a gate valve for isolation during maintenance.
- විදුලි සම්බන්ධතාවය: Connect the pump to a dedicated electrical circuit with proper overcurrent protection. All wiring must be done by a licensed electrician and conform to local electrical codes.
- පරීක්ෂා කිරීම: After installation, fill the sump with water and cycle the pump several times to ensure proper operation and check for leaks.
Figure 1: EBARA 50DWXU6.75S2 DOMINATOR Manual Sewage Pump. This image shows the overall view of the stainless steel pump, highlighting its compact design and the discharge flange at the bottom.
මෙහෙයුම් උපදෙස්
The EBARA 50DWXU6.75S2 is a manual pump, meaning its operation is controlled externally, typically by a control panel or float switch system (not included with the pump itself).
ආරම්භක ආරම්භය:
- Ensure the pump is fully submerged in the liquid to be pumped.
- Verify all piping connections are secure and leak-free.
- Turn on the power supply to the pump's control circuit.
- Activate the pump manually via its control panel or by raising the float switch (if installed) to initiate pumping.
සාමාන්ය මෙහෙයුම:
The pump will operate when activated and will continue to pump until manually shut off or until the liquid level drops below its intake, depending on the control system used. Avoid running the pump dry for extended periods, as this can cause damage.
නඩත්තු කිරීම
නිතිපතා නඩත්තු කිරීම ඔබේ පොම්පයේ ප්රශස්ත ක්රියාකාරිත්වය සහතික කරන අතර එහි ආයු කාලය දීර්ඝ කරයි. ඕනෑම නඩත්තුවක් සිදු කිරීමට පෙර සෑම විටම විදුලිය විසන්ධි කරන්න.
Routine Checks (Monthly):
- Sump/Basin පරීක්ෂාව: Check the sump for excessive debris or sludge buildup that could impede pump operation.
- පොම්ප නිවාස: Inspect the pump for any visible damage or corrosion.
- විසර්ජන රේඛාව: විසර්ජන රේඛාව පැහැදිලි සහ බාධාවකින් තොර බවට වග බලා ගන්න.
- මෙහෙයුම් පරීක්ෂණය: Manually cycle the pump to ensure it starts and stops correctly and pumps efficiently.
වාර්ෂික නඩත්තු:
- Consider having a qualified technician inspect the motor, impeller, and seals for wear.
- Clean the pump thoroughly to remove any accumulated residue.
දෝෂගවේෂණය
Before attempting any repairs, ensure the power supply to the pump is disconnected.
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| පොම්පය ආරම්භ නොවේ. | No power; tripped breaker; faulty wiring; motor issue. | Check power supply and breaker. Inspect wiring. Consult technician for motor issues. |
| Pump runs but does not pump liquid. | Air lock; clogged impeller/intake; discharge line obstruction. | Bleed air from system. Clear any blockages from impeller or intake. Check discharge line for clogs. |
| පොම්ප චක්ර නිතර නිතර. | Check valve failure; small sump; control issue. | Inspect/replace check valve. Evaluate sump size. Check control system settings. |
පිරිවිතර
- ආකෘතිය: 50DWXU6.75S2
- වෙළඳ නාමය: EBARA
- අශ්වබල (HP): 1 HP
- වෙළුමtage: 1 x 230V
- ද්රව්ය: මල නොකන වානේ
- අයිතමයේ බර: රාත්තල් 41 කි
- පැකේජ මානයන්: අඟල් 23 x 11 x 10
- බලශක්ති ප්රභවය: AC/DC
වගකීම් සහ සහාය
For specific warranty information, please refer to the documentation provided with your purchase or contact EBARA customer service directly. Keep your purchase receipt as proof of purchase.
For technical support, parts, or service inquiries, please contact EBARA customer support or an authorized service center. Contact details can typically be found on the manufacturer's official webඅඩවිය හෝ නිෂ්පාදන ඇසුරුම්කරණය මත.
Note: Protection plans may be available from third-party providers, but these are separate from the manufacturer's warranty.
