1. හැඳින්වීම
This manual provides instructions for the installation, operation, and maintenance of the Sloan Royal A-1041-A Water Closet Diaphragm Assembly 1.6 GPF. This assembly is designed as a replacement part for Sloan Royal Flushometers, ensuring proper water usage and efficient flushing.
The A-1041-A diaphragm assembly features a PERMEX Synthetic rubber diaphragm and a Dual-Filtered Fixed Bypass, engineered to deliver precise flushing volumes for 1.6 gallons per flush (GPF) water closets.
2 ආරක්ෂිත තොරතුරු
Always observe basic safety precautions when working with plumbing systems. Failure to do so may result in personal injury or property damage.
- ඕනෑම ස්ථාපනයක් හෝ අලුත්වැඩියා කටයුත්තක් ආරම්භ කිරීමට පෙර ප්රධාන ජල සැපයුම අක්රිය කරන්න.
- ආරක්ෂිත වීදුරු සහ අත්වැසුම් වැනි සුදුසු පුද්ගලික ආරක්ෂක උපකරණ පළඳින්න.
- කාන්දුවීම් වැළැක්වීම සඳහා සියලුම සම්බන්ධතා ආරක්ෂිත බව සහතික කර ගන්න.
- ඔබට කිසියම් පියවරක් පිළිබඳව සැකයක් ඇත්නම්, සුදුසුකම් ලත් ජලනල කාර්මිකයෙකුගෙන් විමසන්න.
3. නිෂ්පාදන අවසන්view
The Sloan Royal A-1041-A Water Closet Diaphragm Assembly is a critical component within a Royal Flushometer, regulating water flow for each flush cycle. It consists of a durable PERMEX synthetic rubber diaphragm and a dual-filtered fixed bypass for consistent performance.
රූපය 1: ඉහළ view of the Sloan Royal A-1041-A Water Closet Diaphragm Assembly. This image shows the green PERMEX diaphragm and the overall structure of the assembly from above.
රූපය 2: පහළ view of the Sloan Royal A-1041-A Water Closet Diaphragm Assembly. This image provides a view of the underside of the assembly, highlighting its internal components and bypass mechanism.
රූපය 3: පුපුරා ගියේය view of a typical Sloan Royal Flushometer. The diaphragm assembly is clearly visible as a key internal component, located beneath the cover and above the main valve body. This illustration helps in understanding its placement within the flushometer.
3.1 ගැළපුම
This diaphragm assembly is specifically designed for use with Sloan Royal Flushometers. It is a 1.6 GPF (Gallons Per Flush) model for water closets. Always verify the GPF rating of your existing flushometer to ensure proper compatibility and function. Other Royal water closet diaphragm replacements are available in 1.28 GPF and 3.5 GPF, and urinal models in 0.125 GPF, 0.5 GPF, 1.0 GPF, and 1.5 GPF.
4. ස්ථාපන උපදෙස්
These instructions outline the general procedure for replacing a diaphragm assembly in a Sloan Royal Flushometer. Specific flushometer models may have minor variations.
- ජල සැපයුම අක්රිය කරන්න: Locate the control stop on the flushometer (typically on the right side, as shown in Figure 3) and turn it clockwise with a screwdriver until the water supply is completely shut off. Flush the fixture to relieve any remaining pressure.
- Remove Flushometer Cover: Unscrew the top cover of the flushometer. This may require a spud wrench or similar tool.
- Remove Old Diaphragm Assembly: Carefully lift out the old diaphragm assembly from the flushometer body. Inspect the inside of the flushometer for any debris or mineral buildup and clean if necessary.
- Install New Diaphragm Assembly: Place the new Sloan Royal A-1041-A diaphragm assembly into the flushometer body, ensuring it is seated correctly. The green PERMEX diaphragm should face upwards.
- Replace Flushometer Cover: Screw the top cover back onto the flushometer body. Hand-tighten first, then use a wrench to secure it, but do not overtighten.
- ජල සැපයුම යථා තත්ත්වයට පත් කිරීම: Slowly open the control stop by turning it counter-clockwise. Listen for water filling the flushometer.
- පරීක්ෂණ ෆ්ලෂ්: Once the water supply is fully restored, test the flushometer several times to ensure proper operation and check for any leaks.
5. මෙහෙයුම
The Sloan Royal A-1041-A diaphragm assembly operates automatically within the Royal Flushometer. When the flush handle is activated, it momentarily releases pressure above the diaphragm, allowing water to flow through the flushometer and into the water closet. Once the handle is released, pressure equalizes, and the diaphragm reseats, stopping the water flow after the predetermined 1.6 GPF volume has been delivered.
6. නඩත්තු කිරීම
Regular maintenance ensures the longevity and optimal performance of your Sloan Royal Flushometer and its diaphragm assembly.
- වරින් වර පරීක්ෂා කිරීම: Periodically inspect the flushometer for signs of leaks or inconsistent flushing.
- පිරිසිදු කිරීම: If water quality is poor, mineral deposits can accumulate. Disassemble the flushometer (following installation steps 1-3) and gently clean the diaphragm assembly and flushometer body with a soft brush and mild soap. Avoid harsh chemicals.
- අව්යාජ කොටස්: To extend the life and ensure the highest performance of your Sloan products, always use Sloan Genuine Parts for replacements. The A-1041-A is a genuine Sloan part designed and tested to Sloan specifications.
Video: Sloan Genuine Parts. This video highlights the importance of using authentic Sloan replacement parts for optimal performance and longevity of your Sloan plumbing fixtures.
7. දෝශ නිරාකරණය
This section addresses common issues related to flushometer diaphragm assemblies.
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| Continuous Water Flow / Leakage | Worn or damaged diaphragm assembly; debris under diaphragm. | Replace diaphragm assembly (A-1041-A); clean flushometer body and diaphragm seating area. |
| Insufficient Flush Volume | Clogged bypass in diaphragm; low water pressure; incorrect GPF diaphragm. | Clean or replace diaphragm assembly; check water supply pressure; ensure correct 1.6 GPF diaphragm is installed. |
| Flushometer Does Not Flush | Control stop closed; handle assembly issue; severely clogged diaphragm. | Open control stop; inspect/repair handle assembly; replace diaphragm assembly. |
8. පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| ආදර්ශ අංකය | A-1041-A |
| කොටස අංකය | 3301122 |
| වෙළඳ නාමය | ස්ලෝන් |
| ෆ්ලෂ් පරිමාව | 1.6 GPF (ෆ්ලෂ් එකකට ගැලුම්) |
| යෙදුම | Water Closet Flushometers |
| ප්රාචීරය ද්රව්ය | PERMEX Synthetic Rubber |
| බයිපාස් වර්ගය | Dual-Filtered Fixed Bypass |
| අයිතම මානයන් (L x W x H) | අඟල් 3.3 x 3.3 x 2.8 |
| අයිතමයේ බර | අවුන්ස 1.6 කි |
| UPC | 671254258020 |
9. වගකීම් සහ සහාය
For detailed warranty information and technical support, please refer to the official Sloan website or contact Sloan customer service directly. Using genuine Sloan parts, such as the A-1041-A diaphragm assembly, helps maintain product warranty and ensures optimal performance.
නිෂ්පාදකයා: Sloan Valve Co.
Webඅඩවිය: www.sloan.com (Note: This is a placeholder link, please refer to the manufacturer's official documentation for the exact support contact information.)
