Samson SP01 Spider Mount Instruction Manual

1. හැඳින්වීම

The Samson SP01 Spider Mount is a high-quality shock mount designed to enhance audio recording by isolating microphones from unwanted vibrations. This manual provides essential information for the proper setup, operation, and maintenance of your SP01 Spider Mount.

2 ප්රධාන ලක්ෂණ

• Vibration Isolation: Designed to isolate the microphone from physical vibrations, floor noise, and stand noise, contributing to clearer audio recordings.
• ශක්තිමත් ඉදිකිරීම්: Constructed from metal for durability and reliable support.
• Specific Compatibility: Engineered for seamless integration with designated Samson condenser microphones.

3. Compatible Microphones

The Samson SP01 Spider Mount is compatible with the following Samson condenser microphones:

• සැම්සන් C01
• සැම්සන් C03
• සැම්සන් CL7
• සැම්සන් CL8
• සැම්සන් C01U

For optimal performance, ensure your microphone model is listed above.

4. පිහිටුවීම සහ ස්ථාපනය

Follow these steps to properly attach your Samson SP01 Spider Mount to a microphone stand and install your compatible microphone.

4.1 Attaching to a Microphone Stand

1. Identify the threaded adapter on your microphone stand. The SP01 mount typically uses a standard thread size.
2. Screw the base of the SP01 Spider Mount onto the microphone stand until it is securely fastened. Ensure it is tight enough to prevent wobbling but do not overtighten.

Image: The Samson SP01 Spider Mount shown attached to a microphone stand, illustrating its typical setup.

4.2 මයික්‍රෆෝනය ස්ථාපනය කිරීම

1. Gently open the spring-loaded clamps of the Spider Mount.
2. Carefully insert your compatible Samson condenser microphone into the mount, ensuring it is centered and held firmly by the elastic bands.
3. cl නිදහස් කරන්නamps, allowing the elastic bands to securely cradle the microphone. The elastic suspension system is crucial for isolating vibrations.

රූපය: සමීප ඡායාරූපයක් view of a microphone being carefully placed into the elastic suspension of the Samson SP01 Spider Mount.

5. ක්‍රියාකාරිත්වය සහ ගැලපීම

The Samson SP01 Spider Mount allows for flexible positioning of your microphone.

• කෝණ ගැලපීම: Use the knob on the side of the mount to loosen, adjust the microphone to your desired angle, and then tighten to secure its position.
• කම්පනය අඩු කිරීම: The primary function of the Spider Mount is to reduce unwanted vibrations transmitted through the microphone stand. Ensure the elastic bands are intact and properly tensioned for effective isolation.

6. නඩත්තු කිරීම

To ensure the longevity and optimal performance of your Samson SP01 Spider Mount, follow these maintenance guidelines:

• පිරිසිදු කිරීම: Wipe the metal frame with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive materials.
• ඉලාස්ටික් පටි: Periodically inspect the elastic bands for signs of wear, stretching, or breakage. Worn bands may reduce the mount's effectiveness in isolating vibrations. Replacement bands can be sourced from authorized Samson dealers.
• ගබඩා: When not in use, store the mount in a clean, dry environment to prevent damage.

7. දෝශ නිරාකරණය

If you experience issues with your Samson SP01 Spider Mount, consider the following:

• අධික කම්පන ශබ්දය:
  • මයික්‍රෆෝනය ඉලාස්ටික් පටි තුළ නිවැරදිව සවි කර ඇති බවට වග බලා ගන්න.
  • Check if the elastic bands are worn or broken and replace them if necessary.
  • Verify that the mount is securely tightened to the microphone stand.
• Microphone Slipping:
  • Confirm that your microphone is one of the compatible models.
  • Ensure the elastic bands are providing adequate tension.

8. පිරිවිතර

9. වගකීම් සහ සහාය

For warranty information and technical support, please refer to the official Samson Technologies webවෙබ් අඩවියට හෝ ඔවුන්ගේ පාරිභෝගික සේවය අමතන්න. ඕනෑම වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.

අමතර සම්පත් සහ නිෂ්පාදන තොරතුරු සඳහා, පිවිසෙන්න SAMSON Store on Amazon.