ඩිටෙක්ටෝ MCS-60H එල්ලෙන ඩයල් පරිමාණ පරිශීලක අත්පොත

1. නිෂ්පාදන අවසන්view

The Detecto MCS-60H is a robust hanging dial scale designed for accurate weight measurement up to 60 pounds. It features an easy-to-read dial and a durable construction, making it suitable for various industrial and commercial applications. This manual provides essential information for the proper setup, operation, and maintenance of your scale.

Figure 1: Detecto MCS-60H Hanging Dial Scale. This image shows the full view of the scale, highlighting its circular dial with numerical markings, the red pointer, and the S-hook attachment at the bottom for weighing items.

2. පිහිටුවීම සහ ස්ථාපනය

Before using your Detecto MCS-60H scale, ensure it is properly set up in a suitable location.

1. ඇසිරීම: Carefully remove the scale from its packaging. Inspect for any signs of damage during transit.
2. ස්ථානය: Choose a stable and secure overhead support from which to hang the scale. Ensure the support can safely bear the weight of the scale plus the maximum load (60 lbs).
3. Hanging the Scale: Use the integrated top hook or swivel shackle to securely attach the scale to your chosen overhead support. Ensure it hangs freely and is not obstructed.
4. Attaching the S-Hook: The included 4-inch (10 cm) S-hook should be attached to the bottom hook of the scale. This S-hook is used to suspend the items to be weighed.
5. ශුන්‍ය ගැලපීම: Before weighing, ensure the scale's pointer is at the zero mark when nothing is suspended from the bottom hook. If it is not, gently adjust the zeroing mechanism (if available, typically a small knob or screw near the dial) until the pointer aligns with zero.

3. මෙහෙයුම් උපදෙස්

Follow these steps for accurate weighing with your Detecto MCS-60H scale.

1. සකස් කිරීම: Ensure the scale is hanging freely and the pointer is at the zero mark.
2. Loading the Item: Carefully attach the item to be weighed to the S-hook at the bottom of the scale. Ensure the item is securely fastened and does not swing excessively.
3. Reading the Weight: Allow the pointer to settle completely. Read the weight indicated by the red pointer on the dial. The dial is marked in pounds (lb) with increments for precise measurement. The scale has a 60 lb capacity with 1/10 lb divisions.
4. බෑම: Once the reading is taken, carefully remove the item from the S-hook. The pointer should return to the zero position.

වැදගත් සටහන්:

• Do not exceed the maximum capacity of 60 lbs to prevent damage to the scale.
• Avoid sudden impacts or dropping items onto the scale.
• Ensure the scale is level and stable during operation for accurate readings.

4. නඩත්තුව සහ රැකවරණය

Proper maintenance will ensure the longevity and accuracy of your Detecto MCS-60H scale.

• පිරිසිදු කිරීම: Wipe the scale's exterior with a soft, damp cloth. Do not use abrasive cleaners, solvents, or immerse the scale in water. Ensure the scale is dry after cleaning.
• ගබඩා: When not in use, store the scale in a clean, dry environment, away from extreme temperatures, humidity, and direct sunlight.
• පරීක්ෂාව: Periodically inspect the hooks, chains, and the dial for any signs of wear, damage, or corrosion. Replace any worn or damaged components immediately.
• ක්රමාංකනය: While dial scales are generally robust, if you suspect inaccuracies, professional calibration may be required. Contact Detecto customer support for service options.

5. දෝශ නිරාකරණය

This section addresses common issues you might encounter with your scale.

If you encounter issues not listed here or require further assistance, please contact Detecto customer support.

6. පිරිවිතර

7. වගකීම් සහ සහාය

For warranty information, technical support, or service inquiries regarding your Detecto MCS-60H scale, please contact Detecto Scale Company directly. Refer to the product packaging or the official Detecto webවඩාත්ම යාවත්කාලීන සම්බන්ධතා තොරතුරු සහ වගකීම් කොන්දේසි සඳහා අඩවිය.

නිෂ්පාදකයා: Detecto Scale Company

Note: Warranty terms may vary by region and retailer. Keep your purchase receipt as proof of purchase.