CASIO DQD-80J-8JF Digital Radio Alarm Clock User Manual

1. හැඳින්වීම සහ අවසන්view

Thank you for choosing the CASIO DQD-80J-8JF Digital Radio Alarm Clock. This device is designed to provide accurate timekeeping through radio wave reception, along with convenient features such as a temperature display, alarm with snooze, and an LED backlight. This manual will guide you through the setup, operation, and maintenance of your new clock.

රූපය 1: ඉදිරිපස view of the CASIO DQD-80J-8JF Digital Radio Alarm Clock. The large LCD display shows the current time, date, and indoor temperature. Buttons for operation are located on the front panel for easy access.

2. නිෂ්පාදන ලක්ෂණ

• Radio-Controlled Timekeeping: Automatically corrects time by receiving standard radio waves (supports 2 stations for automatic selection).
• සංඛ්යාංක දර්ශකය: Large, easy-to-read LCD display for time, date, and temperature.
• Electronic Alarm: Features an electronic alarm sound that changes in 5 stages for effective waking.
• මඳක් නිදි කිරීමේ කාර්යය: Allows for repeated alarms, approximately every 5 minutes, up to 7 times.
• LED පසුබිම් ආලෝකය: Provides illumination for easy viewඅඩු ආලෝක තත්ත්වයන් තුළ.
• සම්පූර්ණ ස්වයංක්‍රීය දින දර්ශනය: Displays month, day, and day of the week, automatically adjusting for leap years.
• 12/24 Hour Display: User-selectable time format.
• උෂ්ණත්ව සංදර්ශකය: වත්මන් ගෘහස්ථ උෂ්ණත්වය පෙන්වයි.
• Comfort Mark Function: Indicates with a mark when the temperature is within ±2℃ of a user-defined comfortable range.
• Front Operation: All primary operation buttons are conveniently located on the front panel.

3. පිහිටුවීම

3.1. බැටරි ස්ථාපනය

1. ඒකකයේ පිටුපස පිහිටා ඇති බැටරි මැදිරි කවරය විවෘත කරන්න.
2. Insert two (2) AA size batteries, ensuring the correct polarity (+/-) as indicated inside the compartment.
3. බැටරි මැදිරි කවරය ආරක්ෂිතව වසා දමන්න.

සටහන: The clock comes with monitor batteries. These may have a shorter lifespan than standard batteries. Replace them with new alkaline batteries for optimal performance.

3.2. Initial Time Setting (Radio Wave Reception)

After battery installation, the clock will automatically attempt to receive radio waves to set the correct time. Place the clock in a location where radio wave reception is good, typically near a window and away from electronic devices that may cause interference.

• The clock will display a reception indicator during this process.
• Once successful, the time and date will be automatically adjusted. This may take several minutes.

3.3. Manual Time Setting (If Radio Reception Fails)

If the clock fails to receive radio waves or if you are in an area with poor reception, you can set the time manually.

1. ඔබා අල්ලාගෙන සිටින්න මාදිලිය button (location may vary, refer to diagram in full manual) until the time digits begin to flash.
2. භාවිතා කරන්න සකසන්න or + / - පැය සැකසීමට බොත්තම්.
3. ඔබන්න මාදිලිය again to move to the minute setting, then use සකසන්න or + / - මිනිත්තු සැකසීමට.
4. Repeat this process for setting the year, month, and day.
5. ඔබන්න මාදිලිය one last time to exit the setting mode.

4. මෙහෙයුම් උපදෙස්

4.1. අනතුරු ඇඟවීම සැකසීම

1. ඔබන්න අනතුරු ඇඟවීමේ කට්ටලය button (usually on the front or side). The alarm time will appear and flash.
2. භාවිතා කරන්න සකසන්න or + / - අපේක්ෂිත අනතුරු ඇඟවීමේ වේලාව සැකසීමට බොත්තම්.
3. ඔබන්න අනතුරු ඇඟවීමේ කට්ටලය again to move to the minute setting, then use සකසන්න or + / - මිනිත්තු සැකසීමට.
4. ඔබන්න අනතුරු ඇඟවීමේ කට්ටලය තහවුරු කර පිටවීමට අවසන් වරට.
5. To activate or deactivate the alarm, use the අනතුරු ඇඟවීම සක්‍රිය / අක්‍රිය කරන්න switch or button. An alarm indicator will appear on the display when activated.

4.2. ස්නූස් ශ්‍රිතය භාවිතා කිරීම

අනතුරු ඇඟවීමේ ශබ්දය ඇසෙන විට, එය ඔබන්න SNOOZE / LIGHT button. The alarm will temporarily stop and sound again after approximately 5 minutes. This can be repeated up to 7 times.

4.3. Activating the LED Light

ඔබන්න SNOOZE / LIGHT button to illuminate the display with an LED backlight for a few seconds.

4.4. Switching 12/24 Hour Display

ඔබන්න 12/24H button (or a combination of buttons, refer to specific model instructions) to toggle between 12-hour (with AM/PM indicator) and 24-hour time formats.

4.5. Understanding the Comfort Temperature Display

The clock displays the current indoor temperature. You can set a preferred temperature range. When the ambient temperature falls within ±2℃ of your set comfort temperature, a special comfort mark icon will appear on the display, indicating ideal conditions.

5. නඩත්තු කිරීම

5.1. බැටරි ප්රතිස්ථාපනය

When the display becomes dim or the clock stops functioning, it is time to replace the batteries. Follow the steps in Section 3.1. Always replace both batteries at the same time with new ones of the same type (AA alkaline).

5.2. ඒකකය පිරිසිදු කිරීම

මෘදු වියළි රෙද්දකින් ඔරලෝසුව පිස දමන්න. උල්ෙල්ඛ පිරිසිදු කරන්නන්, ද්‍රාවක හෝ රසායනික ඉසින භාවිතා නොකරන්න, මන්ද මේවා c වලට හානි කළ හැකිය.asing හෝ සංදර්ශකය.

5.3. ගබඩා කිරීම

If you do not plan to use the clock for an extended period, remove the batteries to prevent leakage and damage to the unit.

6. දෝශ නිරාකරණය

• වැරදි කාල සංදර්ශකය:
  Ensure the clock is placed in an area with good radio wave reception. Try initiating manual reception (refer to full manual for specific button combination). If still incorrect, set the time manually as described in Section 3.3.
• No Radio Signal Reception:
  Move the clock closer to a window or to a different room. Avoid placing it near large metal objects, electronic devices (TVs, computers, mobile phones), or in concrete buildings which can block signals.
• එලාම් නාද නොවේ:
  Check if the alarm is activated (alarm indicator on display). Ensure the alarm time is set correctly.
• අඳුරු සංදර්ශකය:
  බැටරි නව ඒවා සමඟ ප්රතිස්ථාපනය කරන්න.
• උෂ්ණත්ව කියවීම වැරදි ලෙස පෙනේ:
  Ensure the clock is not placed in direct sunlight, near heat sources, or in drafts, which can affect the sensor.

7. පිරිවිතර

8. වගකීම් සහ සහාය

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official CASIO webඅඩවිය. ඔබට වැඩිදුර තොරතුරු සොයා ගත හැක CASIO Store on Amazon.