1. නිෂ්පාදන අවසන්view
The Lincoln Electric KP510 TIG Accessory Parts Kit is designed to provide essential consumables for maintaining and operating PTW-20 TIG torches. This kit includes a variety of components necessary for TIG welding, ensuring you have the right parts on hand for efficient operation.
The kit contains collets, collet bodies, a back cap, alumina nozzles, and tungsten electrodes in various sizes. All components are organized within a durable, reclosable box for convenient storage and transport.
2 කට්ටල සංරචක
The KP510 kit includes the following parts, designed for compatibility with PTW-20 TIG torches:
- කොලට්: Components that hold the tungsten electrode securely in place.
- Collet Bodies: These hold the collet and direct the shielding gas flow.
- පසුපස තොප්පිය: Seals the back of the torch head and provides a path for the tungsten electrode.
- Alumina Nozzles: Ceramic cups that direct the shielding gas to the weld puddle. Available in various sizes (e.g., #5, #6, #7) to control gas coverage.
- Tungsten Electrodes: Non-consumable electrodes that conduct the welding current. Provided in different diameters.
රූපය 2.1: අවසන්view of the Lincoln Electric KP510 TIG Accessory Parts Kit, showing the clear plastic case containing various collets, collet bodies, alumina nozzles, a back cap, and tungsten electrodes.
රූපය 2.2: සවිස්තරාත්මක view of individual components from the KP510 kit, including different sizes of alumina nozzles, collets, and collet bodies.
3. පිහිටුවීම සහ ස්ථාපනය
This section provides general guidance for installing the accessory parts into a PTW-20 TIG torch. Always refer to your specific TIG torch manual for detailed instructions.
- සංරචක තෝරන්න: Choose the appropriate size of collet, collet body, alumina nozzle, and tungsten electrode based on your welding application and current requirements.
- Install Collet Body: Thread the selected collet body into the torch head. Ensure it is finger-tight.
- Insert Collet and Tungsten: Insert the chosen collet into the collet body. Then, slide the tungsten electrode through the collet and collet body from the back of the torch.
- Attach Back Cap: Thread the back cap onto the torch body, tightening it to secure the tungsten electrode. Adjust the tungsten stick-out as needed.
- Attach Alumina Nozzle: Push or thread the selected alumina nozzle onto the front of the torch head, ensuring a snug fit.
- ගෑස් සම්බන්ධතාවය: Verify that the shielding gas connection to the torch is secure and free from leaks.
සටහන: Proper installation of these components is crucial for effective shielding gas coverage and stable arc performance. Incorrect assembly can lead to poor weld quality.
4. මෙහෙයුම් සලකා බැලීම්
Once the accessory parts are correctly installed, consider the following for optimal TIG welding performance:
- ටංස්ටන් සකස් කිරීම: Ensure your tungsten electrode is properly ground to the correct taper for your application.
- Shielding Gas Flow: Set the shielding gas flow rate according to the nozzle size and welding current. Insufficient flow can lead to porosity.
- තුණ්ඩ තේරීම: Use the appropriate nozzle size for the joint configuration and desired gas coverage. Larger nozzles provide wider gas coverage.
- වත්මන් සැකසුම්: Adjust welding current based on material thickness and tungsten diameter.
5. නඩත්තු කිරීම
Regular maintenance of your TIG torch accessories ensures consistent welding performance and extends the life of your equipment.
- Inspect Alumina Nozzles: Regularly check nozzles for cracks, chips, or excessive spatter buildup. Replace damaged nozzles to maintain proper gas shielding.
- Clean Collets and Collet Bodies: Remove any spatter or debris from collets and collet bodies. Ensure they are clean to allow for proper tungsten seating and gas flow.
- Tungsten Replacement: Replace tungsten electrodes when they become contaminated, blunted, or too short for effective grinding.
- ගබඩා: Store unused components in the provided reclosable box to protect them from dust and damage.
6. පොදු ගැටළු දෝශ නිරාකරණය
This section addresses common issues related to TIG torch consumables. For comprehensive torch troubleshooting, refer to your TIG welding machine's manual.
| කලාපය | Possible Cause (Consumable Related) | විසඳුම |
|---|---|---|
| වෑල්ඩින් වල සිදුරු බව | Cracked or dirty alumina nozzle, incorrect gas flow, loose collet body. | Inspect/replace nozzle, check gas flow rate, tighten collet body. |
| අස්ථායී චාප | Contaminated or improperly ground tungsten, loose collet. | Regrind or replace tungsten, ensure collet is holding tungsten securely. |
| Tungsten Slipping | Worn collet, loose back cap. | Replace collet, tighten back cap. |
7. පිරිවිතර
- වෙළඳ නාමය: ලින්කන් විදුලි
- ආදර්ශ අංකය: KP510
- කොටස අංකය: KP510
- ද්රව්ය: Alumina (for nozzles)
- අයිතමයේ බර: කිලෝග්රෑම් 0.22 (ආසන්න වශයෙන් අවුන්ස 7.7)
- නිෂ්පාදන මානයන්: 6 x 1 x 1 අඟල් (ඇසුරුම්කරණය)
- UPC: 015082165103
- ඇතුළත් සංරචක: Kit (Collets, Collet Bodies, Back Cap, Alumina Nozzles, Tungsten)
8 ආරක්ෂිත තොරතුරු
අවවාදයයි: මෙම නිෂ්පාදනයට ඔබව ඊයම් ඇතුළු රසායනික ද්රව්යවලට නිරාවරණය කළ හැකිය, එය පිළිකා සහ උපත් ආබාධ හෝ වෙනත් ප්රජනක හානි ඇති කිරීමට කැලිෆෝනියා ප්රාන්තය දන්නා කරුණකි. වැඩි විස්තර සඳහා යන්න www.P65Warnings.ca.gov.
Always follow general welding safety practices, including wearing appropriate personal protective equipment (PPE) such as welding helmets, gloves, and protective clothing.
9. වගකීම් සහ සහාය
This product is sold without an explicit warranty. For product support or inquiries regarding Lincoln Electric products, please visit the official Lincoln Electric webවෙබ් අඩවිය හෝ ඔවුන්ගේ පාරිභෝගික සේවා දෙපාර්තමේන්තුව අමතන්න.
