Eiko DT50/35/RS

Eiko DT50/35/RS 50W 2G11 Compact Fluorescent Halogen Bulb User Manual

Model: DT50/35/RS

1. හැඳින්වීම

This manual provides essential information for the safe and effective use of your Eiko DT50/35/RS 50W 2G11 Compact Fluorescent Halogen Bulb. Please read these instructions carefully before installation and retain for future reference.

The Eiko DT50/35/RS is a 50-watt compact fluorescent (CFL) bulb, also referred to as a compact fluorescent halogen bulb, featuring a Duo-Tube design and a 2G11 base. It produces a 3500K cool white light with 4300 lumens brightness, suitable for various lighting applications.

Eiko DT50/35/RS 50W 2G11 Compact Fluorescent Halogen Bulb

Figure 1: Eiko DT50/35/RS 50W 2G11 Compact Fluorescent Halogen Bulb. This image shows the elongated, dual-tube design of the bulb with its 2G11 base at the bottom.

2. ආරක්ෂිත උපදෙස්

WARNING: To prevent electric shock or burns, always turn off the power supply before installing or replacing the bulb.

  • බල්බයේ විදුලි බලය සඳහා සවිකිරීම ශ්‍රේණිගත කර ඇති බවට වග බලා ගන්න.tage (50W).
  • Do not use with dimmers unless explicitly stated as compatible.
  • Handle the bulb by its base to avoid touching the glass, as oils from skin can reduce bulb life.
  • If the bulb breaks, ventilate the room and carefully clean up the broken glass and mercury according to local regulations.
  • දරුවන්ට ළඟා විය නොහැකි ලෙස තබා ගන්න.

3. පිහිටුවීම සහ ස්ථාපනය

  1. බලය අක්රිය කරන්න: Locate the light fixture's power switch and turn it off. For added safety, turn off the circuit breaker controlling the fixture.
  2. පැරණි බල්බය ඉවත් කරන්න (අදාළ නම්): If replacing an existing bulb, allow it to cool completely before carefully removing it from the fixture.
  3. පාදක වර්ගය හඳුනා ගන්න: Confirm your fixture uses a 2G11 base. The Eiko DT50/35/RS bulb has a 2G11 4-pin base.
  4. 2G11 Base Diagram

    Figure 2: Diagram of a 2G11 base. This illustration shows the four-pin configuration of the 2G11 lamp base, indicating its shape and pin arrangement for proper insertion.

  5. නව බල්බයක් සවි කරන්න: Align the four pins of the Eiko DT50/35/RS bulb with the corresponding slots in the fixture's 2G11 socket. Gently push the bulb straight into the socket until it is firmly seated. Do not force the bulb.
  6. බලය ප්‍රතිස්ථාපනය කරන්න: Once the bulb is securely installed, turn the circuit breaker back on, then turn on the light switch.

4. මෙහෙයුම් උපදෙස්

The Eiko DT50/35/RS bulb operates like a standard fluorescent lamp. Once installed in a compatible fixture and power is supplied, it will illuminate when the fixture's switch is turned on.

  • Initial Warm-up: Fluorescent bulbs may take a few moments to reach full brightness, especially in colder environments.
  • ක්‍රියාත්මක/අක්‍රිය: Frequent switching on and off can reduce the lifespan of fluorescent bulbs. It is recommended to leave the light on for longer periods when possible.

5. නඩත්තු කිරීම

  • පිරිසිදු කිරීම: Ensure the power is off and the bulb is cool before cleaning. Gently wipe the bulb with a soft, dry, lint-free cloth. Do not use liquid cleaners or abrasive materials.
  • ආදේශනය: Replace the bulb when it reaches the end of its life (flickering, dimming, or failure to light). Always turn off the power before replacing.
  • බැහැර කිරීම: This compact fluorescent bulb contains a small amount of mercury. Dispose of it according to local, state, and federal regulations. Many retailers and municipalities offer recycling programs for CFLs. Do not dispose of in regular household trash.

6. දෝශ නිරාකරණය

ගැටලුවවිය හැකි හේතුවවිසඳුම
බල්බය දැල්වෙන්නේ නැත.සවි කිරීමට බලයක් නොමැත.
බල්බය නිසි ලෙස සවි කර නැත.
Bulb is faulty or at end of life.
Fixture ballast is faulty.
බල ස්විචය සහ පරිපථ කඩනය පරීක්ෂා කරන්න.
Turn off power, re-seat bulb firmly.
විදුලි බුබුල ප්‍රතිස්ථාපනය කරන්න.
සුදුසුකම් ලත් විදුලි කාර්මිකයෙකුගෙන් විමසන්න.
බල්බ දැල්වෙයි.බල්බයේ ආයු කාලය අවසන් වීමට ආසන්නයි.
නොගැලපෙන ඩිමර්.
ලිහිල් සම්බන්ධතාවය.
Cold environment.
විදුලි බුබුල ප්‍රතිස්ථාපනය කරන්න.
Remove dimmer or replace with compatible bulb/fixture.
Turn off power, check bulb seating.
Allow time for warm-up.
බල්බය අඳුරුයි.බල්බයේ ආයු කාලය අවසන් වීමට ආසන්නයි.
වැරදි වොට්tage for fixture.
විදුලි බුබුල ප්‍රතිස්ථාපනය කරන්න.
Ensure fixture and bulb wattagඊ තරගය.

7. පිරිවිතර

විශේෂාංගයවිස්තර
වෙළඳ නාමයඑයිකෝ
ආදර්ශ අංකයDT50/35/RS
ආලෝක වර්ගයCompact Fluorescent Halogen (CFL)
වට්tageවොට් 50
මූලික වර්ගය2G11 (4-පින්)
වර්ණ උෂ්ණත්වය3500 කෙල්වින් (සිසිල් සුදු)
දීප්තිය4300 Lumens
හැඩයT4 (Duo-Tube)
මානයන්ආසන්න වශයෙන් 1 x 1 x 2.7 අඟල්
අයිතමයේ බරඅවුන්ස 3.2 කි
ද්රව්යටංස්ටන්

8. වගකීම් සහ සහාය

Specific warranty information for Eiko products may vary. Please refer to the original product packaging or the official Eiko website for the most current warranty details.

For technical support or further inquiries, please contact Eiko customer service through their official channels. Contact information can typically be found on the manufacturer's webඅඩවිය හෝ නිෂ්පාදන ඇසුරුම්කරණය.

නිෂ්පාදකයා: එයිකෝ

කොටස අංකය: DT50/35/RS

UPC: 031293493040

අදාළ ලියකියවිලි - DT50/35/RS

පෙරview EIKO LED T8 Linear Tube Installation Instructions
Comprehensive installation instructions for EIKO LED T8 Type B Linear Tube lights, covering safety precautions, maintenance, and detailed wiring diagrams for retrofitting fluorescent luminaires.
පෙරview EIKO LHS1 Series LED Linear High Bay Installation Instructions
Comprehensive installation guide for the EIKO LHS1 Series LED Linear High Bay fixtures, covering overview, safety precautions, mounting options, wiring diagrams, and controls.
පෙරview EIKO VL1 Series LED Volumetric Troffer Installation Instructions
Comprehensive installation guide for the EIKO VL1 Series LED Volumetric Troffer, covering overview, safety precautions, installation steps, wiring schematics, and sensor installation. Includes power and CCT selection.
පෙරview ෆොටෝසෙල් ස්ථාපන මාර්ගෝපදේශය සහිත EIKO Z10 මයික්‍රෝවේව් ද්වි-මට්ටමේ ඩිමිං සංවේදකය
Photocell සහිත EIKO Z10 මයික්‍රෝවේව් ද්වි-මට්ටමේ ඩිමිං සංවේදකය සඳහා සවිස්තරාත්මක ස්ථාපන මාර්ගෝපදේශය, පිරිවිතරයන්, සංවේදක ආවරණය සහ නිසි සැකසුම සහ ක්‍රියාකාරිත්වය සඳහා FCC අනුකූලතා තොරතුරු විස්තර කරයි.
පෙරview EIKO CSX1 Series LED Commercial Strip Premium Installation Instructions
Comprehensive installation guide for the EIKO CSX1 Series LED Commercial Strip Premium fixtures, covering surface mount, chain mount, and optional accessory installations.
පෙරview EIKO LED මතුපිට වියන් චතුරශ්‍ර ස්ථාපන උපදෙස්
මෙම ලේඛනය EIKO LED මතුපිට වියන් චතුරස්‍ර සවිකිරීම සඳහා සවිස්තරාත්මක ස්ථාපන උපදෙස් සපයන අතර, ආරක්ෂිත පූර්වාරක්ෂාවන්, මතුපිට සවි කිරීම, පැති රැහැන් ඇදීම, පෙන්ඩන්ට් සවි කිරීම, බල ගැලපීම සහ Z10 සංවේදක ස්ථාපනය ආවරණය කරයි.