1. හැඳින්වීම
This manual provides essential instructions for the safe and effective use, assembly, maintenance, and troubleshooting of your Nova Ortho-Med 5000 Series Wheelchair. Please read this manual thoroughly before using the wheelchair to ensure proper operation and user safety. Keep this manual for future reference.
1.1 ආරක්ෂිත තොරතුරු
- රෝද පුටුවට ඇතුළු වීමට හෝ ඉන් පිටතට යාමට පෙර සෑම විටම රෝද අගුල් භාවිතා කරන්න.
- එක් එක් භාවිතයට පෙර සියලුම සංරචක ආරක්ෂිතව සවි කර ඇති බවට වග බලා ගන්න.
- උපරිම බර ධාරිතාව රාත්තල් 275 නොඉක්මවන්න.
- Avoid sudden movements or leaning excessively, which could cause tipping.
- Regularly inspect tires, brakes, and frame for wear or damage.
2. සංරචක අවසන්view
Familiarize yourself with the main parts of your Nova Ortho-Med 5000 Series Wheelchair.
Image 1: Nova Ortho-Med 5000 Series Wheelchair. This image displays the full wheelchair from a slight angle, showing the black seat and backrest, chrome frame, large rear wheels, smaller front casters, and adjustable footrests.
- රාමුව: The main structure, typically chrome-plated steel.
- ආසනය සහ පසුපස ආසනය: Black nylon upholstery for user comfort.
- අත්වාරු: Padded for support, often removable or flip-back.
- පසුපස රෝද: Large wheels with handrims for self-propulsion, equipped with wheel locks.
- ඉදිරිපස කැස්ටර්: Smaller swivel wheels for steering and maneuverability.
- පාද ආවරණ/කළු පාද ආවරණ: Adjustable and removable for user comfort and transfers.
- රෝද අගුල්: Levers located near the rear wheels to secure the wheelchair in place.
3. සැකසීම සහ එකලස් කිරීම
3.1 රෝද පුටුව දිග හැරීම
- නැමුණු රෝද පුටුව පැතලි, ස්ථාවර මතුපිටක් මත තබන්න.
- Grasp the top of the handgrips and gently pull them apart.
- Push down on the seat rails until the seat is fully open and flat. Ensure the cross braces are fully extended.
3.2 Attaching Footrests/Legrests
- Align the footrest attachment pins with the receptacles on the front of the wheelchair frame.
- Swing the footrest outward slightly, insert the pins, and then swing the footrest inward until it locks into place.
- Adjust the height of the footplates so the user's feet are comfortably supported and knees are at approximately a 90-degree angle. Use the adjustment lever or pin to secure the desired height.
3.3 Adjusting Hemi Seat Height (Dual Axle Design)
The dual axle design allows for easy conversion to hemi seat height. This adjustment lowers the seat for users who propel with their feet.
- Remove the rear wheels by depressing the quick-release button on the axle and pulling the wheel off.
- Relocate the axle to the lower set of holes on the frame.
- Reattach the rear wheels, ensuring they are securely locked.
- Adjust the front casters if necessary to maintain proper ground clearance and stability.
4. රෝද පුටුව ක්රියාත්මක කිරීම
4.1 Engaging and Disengaging Wheel Locks
- To engage: Push the wheel lock levers forward until they click into place, securing the rear wheels.
- To disengage: Pull the wheel lock levers backward to release the rear wheels.
- Always engage both wheel locks when transferring or when the wheelchair is stationary.
4.2 Self-Propulsion
To move the wheelchair, grasp the handrims on the rear wheels and push forward or backward. Use both hands for smooth, controlled movement.
4.3 Assisted Propulsion
When assisting a user, push the wheelchair by the handgrips located on the back of the chair. Be mindful of obstacles and uneven terrain.
4.4 ගබඩා කිරීම/ප්රවාහනය සඳහා නැමීම
- Ensure footrests are removed or swung out of the way.
- Grasp the center of the seat upholstery (front and back) and pull upwards. The wheelchair will begin to fold inward.
- Continue pulling until the wheelchair is fully folded.
5. නඩත්තුව සහ රැකවරණය
5.1 පිරිසිදු කිරීම
- දැන්වීම සමඟ රාමුව පිස දමන්නamp රෙදි සහ මෘදු සබන්. හොඳින් වියළන්න.
- Clean upholstery with a mild detergent and water. Allow to air dry completely.
- Avoid abrasive cleaners or solvents that could damage the finish or materials.
5.2 නිතිපතා පරීක්ෂාව
Perform the following checks monthly or as needed:
- ටයර්: Check for wear, cracks, or punctures. Ensure proper inflation if pneumatic.
- රෝද අගුල්: Verify they engage securely and hold the wheels firmly. Adjust if necessary.
- ගාංචු: Inspect all nuts, bolts, and screws for tightness. Tighten any loose fasteners.
- රාමුව: Look for any signs of cracks, bends, or corrosion.
- උඩු මහල: Check for tears or excessive wear.
5.3 ලිහිසි කිරීම
Apply a small amount of silicone-based lubricant to moving parts such as axle pins, caster stems, and folding mechanisms periodically to ensure smooth operation.
6. දෝශ නිරාකරණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| Wheel locks do not hold | Misalignment or wear | Adjust the wheel lock mechanism or replace worn parts. Ensure tires are properly inflated. |
| රෝද පුටුව එක පැත්තකට අදිනවා | Uneven tire pressure, bent frame, or loose caster | Check tire pressure. Inspect frame for damage. Tighten caster bolts. |
| නැමීමේ/දිග හැරීමේ අපහසුතාව | Obstruction or lack of lubrication | Check for obstructions. Lubricate folding mechanisms. |
| කිචිබිචි ගා ශබ්ද | ලිහිසි තෙල් නොමැතිකම හෝ ලිහිල් සංරචක | Lubricate moving parts. Tighten all fasteners. |
7. පිරිවිතර
- ආකෘතිය: Nova Ortho-Med 5000 Series
- බර ධාරිතාව: රාත්තල් 275
- රාමු බර: රාත්තල් 39
- Width (Open): 23"
- Width (Closed): 10.5"
- ආසන ගැඹුර: 16"
- ද්රව්ය: Steel frame, Nylon upholstery
- වර්ණය: කළු
- විශේෂාංග: Dual axle for hemi-height conversion, offset arms, industry-compatible footrests.
8. වගකීම් සහ සහාය
For specific warranty information regarding your Nova Ortho-Med 5000 Series Wheelchair, please refer to the documentation included with your purchase or contact Nova customer support directly. General product support and service inquiries can also be directed to the manufacturer.
නිෂ්පාදකයා: Nova Ortho-Med, Inc.
Please note: Warranty terms and conditions may vary. Always consult the official warranty statement.
