හැඳින්වීම
This manual provides essential information for the safe and efficient setup, operation, and maintenance of your Intex 10-Feet x 30-Inch Easy Set Pool. Please read all instructions carefully before assembly and use. Retain this manual for future reference.
වැදගත් ආරක්ෂක තොරතුරු
- කිසි විටෙකත් දරුවන්ව තටාකයේ හෝ ඒ අසල තනිව තබන්න එපා.
- සෑම විටම වැඩිහිටි අධීක්ෂණය අවශ්ය වේ.
- කිමිදෙන්න හෝ තටාකයට පනින්න එපා.
- Ensure the pool is set up on firm, level ground.
- Follow all local regulations regarding pool safety and fencing.
සැකසුම් උපදෙස්
Proper site preparation and assembly are crucial for the longevity and safety of your Easy Set Pool. Follow these steps carefully.
1. අඩවි සකස් කිරීම
Select a firm, level area in your backyard. Remove any sharp objects, debris, or uneven surfaces. The area should be slightly larger than the pool's diameter (10 feet).
Image: A prepared ground area with a blue tarp and grey yoga mats laid out, indicating a level and cushioned base for the pool.
It is recommended to place a ground cloth or tarp (not included) under the pool for added protection against punctures and to provide a slightly softer base. Some users also place foam mats or old yoga mats for extra cushioning.
2. Unpacking and Spreading the Pool Liner
Carefully unpack the pool from its box. Allow the pool liner to warm up in the sun for easier unfolding and to reduce wrinkles. Spread the pool liner evenly on the prepared, level ground.
Image: The blue and white checkered pool liner is spread out on a grassy area, ready for inflation and filling.
3. ඉහළ වළල්ල පිම්බීම
Locate the inflation valve on the top ring of the pool. Use an air pump (electric pump recommended for efficiency) to inflate the top ring until it is firm but not over-inflated. Ensure the valve is securely closed after inflation.
As per the provided data, no official seller videos for this product were available that met the strict criteria for embedding instructional content.
4. Filling the Pool with Water
Begin filling the pool with water using a garden hose. As the water level rises, the pool walls will naturally rise and take shape. Smooth out any wrinkles on the bottom of the pool as it fills. Stop filling when the water reaches the indicated fill line, typically just below the inflated top ring.
Image: An Intex Easy Set Pool filled with water, with children enjoying themselves, demonstrating the pool's capacity and recreational use.
5. පෙරහන් පොම්ප සම්බන්ධතාවය
Connect the included filter pump to the designated inlet and outlet fittings on the pool liner. Ensure all connections are secure to prevent leaks. Refer to the separate filter pump manual for detailed assembly and operation instructions for the pump.
Image: A close-up of the Intex Easy Set Pool showing the filter pump connected to the pool's side, with hoses running to and from the pump.
As per the provided data, no official seller videos for this product were available that met the strict criteria for embedding instructional content.
ඔබේ තටාකය ක්රියාත්මක කිරීම
Once set up, your Intex Easy Set Pool is ready for use. Follow these guidelines for optimal enjoyment.
ජල මට්ටම
Maintain the water level between the upper and lower fill lines. Overfilling can strain the pool structure, while underfilling can affect pump performance.
පෙරහන් පොම්ප මෙහෙයුම
Operate the filter pump daily to ensure proper water circulation and filtration. The recommended run time is typically 2-4 hours per day, depending on usage and water clarity. Consult the pump manual for specific timer settings.
නඩත්තු කිරීම
Regular maintenance is essential to keep your pool water clean and safe.
ජල රසායන විද්යාව
Test your pool water regularly using a pool test kit. Adjust pH, alkalinity, and sanitizer levels (e.g., chlorine) as needed to maintain proper balance. Follow the chemical manufacturer's instructions for dosage.
තටාකය පිරිසිදු කිරීම
- ස්කීම් කිරීම: දිනපතා ජල මතුපිටින් කොළ, කෘමීන් සහ අනෙකුත් සුන්බුන් ඉවත් කිරීමට තටාක ස්කිමර් දැලක් භාවිතා කරන්න.
- රික්ත කිරීම: Periodically vacuum the bottom of the pool to remove settled debris. A garden hose with suction can be used for this purpose.
- ලයිනර් පිරිසිදු කිරීම: Gently wipe down the pool liner with a soft brush or cloth to prevent algae buildup.
පෙරහන් කාට්රිජ් සත්කාරය
The filter cartridge should be rinsed with a garden hose every few days and replaced every 2-4 weeks, or as needed, depending on pool usage and water conditions. A dirty filter cartridge reduces pump efficiency.
දෝෂගවේෂණය
ඔබට මුහුණ දීමට සිදුවිය හැකි පොදු ගැටළු සඳහා විසඳුම් මෙන්න:
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| වලාකුළු සහිත ජලය | Poor filtration, chemical imbalance, high debris load. | Run pump longer, clean/replace filter, adjust water chemistry, shock treat pool. |
| ඇල්ගී වර්ධනය | Low sanitizer levels, poor circulation. | Shock treat with algaecide, brush pool walls, ensure proper filtration. |
| Leaking Pool | Puncture in liner, loose hose connections. | Locate and patch hole with repair kit, tighten all hose clamps. |
| පොම්පය ක්රියා නොකරයි | බල ගැටළුව, පෙරහන අවහිර වීම, පද්ධතිය තුළ වාතය. | Check power supply, clean filter, bleed air from pump. |
පිරිවිතර
- වෙළඳ නාමය: ඉන්ටෙක්ස්
- ආකෘතිය: 56921EG
- Approximate Set-up Size: 10 ft x 30 in (305cm x 76cm)
- ජල ධාරිතාව (80%): ගැල් 1,018 (ලීටර් 3,853)
- ද්රව්ය: පොලිවිවයිල් ක්ලෝරයිඩ් (PVC)
- ඇතුළත් සංරචක: Filter Pump (530 gallon/hour flow rate)
- එකලස් කිරීම අවශ්ය වේ: No (Easy Set-up)
- ගෘහස්ථ/ එළිමහන් භාවිතය: එළිමහන්
- අයිතමයේ බර: පවුම් 24.6ක්
වගකීම් සහ සහාය
For warranty information, product registration, or technical support, please refer to the documentation included with your product or visit the official Intex webවෙබ් අඩවිය. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.
සබඳතා තොරතුරු: Refer to your product packaging or the Intex webවඩාත්ම යාවත්කාලීන පාරිභෝගික සේවා සම්බන්ධතා තොරතුරු සඳහා අඩවිය.
