හැඳින්වීම
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Bogen Communications Ceiling Speaker Assembly, Model S810T725PG8UVR. This pre-assembled 8-inch ceiling-mounted speaker is designed for integration into 70V or 25V commercial audio systems, suitable for paging and background music applications. It includes a transformer, an 8-inch S810 cone, and a grille cover with a recessed volume control.
පැකේජයේ අන්තර්ගතය
- Bogen S810T725PG8UVR Ceiling Speaker Assembly (with 8" S810 cone and grille)
- ඒකාබද්ධ ට්රාන්ස්ෆෝමර්
- Recessed Volume Control
- Mounting Hardware (screws for ceiling installation)
සැකසුම සහ ස්ථාපනය
Before beginning installation, ensure that power to the audio system and associated circuits is turned off. Installation should be performed by qualified personnel in accordance with all local and national electrical codes.
කථානායකවරයා සවි කිරීම
The Bogen S810T725PG8UVR is designed for easy installation into standard drop-ceilings. Identify the desired location for the speaker, ensuring adequate clearance above the ceiling tile for the speaker assembly.
රූපය 1: ඉදිරිපස view of the Bogen S810T725PG8UVR Ceiling Speaker Assembly. This image shows the white grille with the perforated speaker cover and the central recessed volume control. The four screw holes for mounting are visible around the perimeter.
- Carefully cut a circular opening in the ceiling tile that matches the speaker's mounting diameter. Refer to the specifications section for precise dimensions.
- Feed the speaker wires from your amplifier through the opening.
- Position the speaker assembly into the opening.
- Secure the speaker to the ceiling tile using appropriate screws through the designated mounting holes on the speaker's frame. Ensure the speaker is flush and stable.
රැහැන් සම්බන්ධතා
The speaker features a screw terminal bridge for quick and accurate connection to your audio system. This speaker is designed for 70V or 25V constant voltage commercial audio systems.
රූපය 2: පසුපස view of the Bogen S810T725PG8UVR Ceiling Speaker Assembly. This image displays the integrated transformer, the 8-inch speaker cone, and the screw terminal block with color-coded wires for different power tap settings (e.g., 70V, 25V, 4W, 2W, 1W, 1/2W, 1/4W, 1/8W).
- සුදුසු වෙළුම හඳුනා ගන්නtage tap (70V or 25V) and desired wattage setting on the speaker's transformer. The speaker offers various wattage taps (e.g., 4W, 2W, 1W, 1/2W, 1/4W, 1/8W) to adjust the speaker's output level.
- Connect the positive (+) wire from your amplifier to the selected wattage tap terminal on the speaker.
- Connect the negative (-) or common wire from your amplifier to the "COMMON" terminal on the speaker.
- සියලුම සම්බන්ධතා ආරක්ෂිත බවත් කෙටි පරිපථ වලින් තොර බවත් සහතික කර ගන්න.
සටහන: The specific wiring configuration (screw-terminal bridge or bare wire connections) may vary slightly by model. Always verify the connections based on the labels on your specific unit.
මෙහෙයුම් උපදෙස්
Once installed and wired, the Bogen Ceiling Speaker Assembly is ready for operation. The recessed volume control allows for localized adjustment of the speaker's output level.
පරිමාව පාලනය
- The speaker features a recessed volume control located in the center of the grille. This design helps prevent inadvertent volume adjustments.
- To adjust the volume, use a small flat-head screwdriver or a similar tool to gently turn the control dial clockwise to increase volume and counter-clockwise to decrease volume.
- Adjust the volume to a comfortable listening level for background music or to an appropriate level for paging announcements.
The speaker has a frequency response of 70Hz to 15kHz, making it suitable for clear voice reproduction in paging systems and balanced audio for background music.
නඩත්තු කිරීම
The Bogen Ceiling Speaker Assembly requires minimal maintenance to ensure long-term performance.
- පිරිසිදු කිරීම: Periodically wipe the grille and visible surfaces with a soft, dry cloth to remove dust. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the speaker assembly. Do not use harsh chemicals or abrasive cleaners.
- පරීක්ෂාව: Annually inspect the speaker for any visible damage to the grille or frame. Check wiring connections for tightness and corrosion, especially if the speaker is in an environment with fluctuating temperatures or humidity.
- පාරිසරික තත්ත්වයන්: This speaker is designed for indoor use. Avoid exposing the speaker to excessive moisture, extreme temperatures, or direct sunlight, as these can degrade performance and lifespan.
දෝෂගවේෂණය
If you experience issues with your Bogen Ceiling Speaker Assembly, refer to the following common troubleshooting steps:
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| කථිකයාගෙන් ශබ්දයක් නැත |
|
|
| විකෘති හෝ අඩු ගුණාත්මක ශබ්දය |
|
|
| Volume Control Not Responding |
|
|
If these steps do not resolve the issue, contact Bogen Communications customer support or a qualified audio technician.
පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| මාදිලියේ නම | S810T725PG8UVR |
| වෙළඳ නාමය | බෝගන් |
| ස්පීකර් වර්ගය | Ceiling-mounted, 8" Cone |
| ආදාන වෙළුමtage | 25 Volts (also compatible with 70V systems) |
| ස්පීකර් උපරිම නිමැවුම් බලය | වොට් 4 |
| සංඛ්යාත ප්රතිචාරය | 70 Hz සිට 15 kHz දක්වා |
| ද්රව්ය | Metal, Plastic/Paper |
| වර්ණය | සුදු |
| සවිකිරීමේ වර්ගය | සිවිලින් මවුන්ට් |
| පාලක වර්ගය | Recessed Volume Control |
| ඇතුළත් සංරචක | Transformer, 8" S810 cone, Grille cover, Bare wires (depending on model) |
| අයිතමයේ බර | අවුන්ස 9.9 (කිලෝග්රෑම් 0.28) |
| නිෂ්පාදන මානයන් | අඟල් 13 x 13 x 3.2 |
| ගෘහස්ථ / එළිමහන් භාවිතය | ගෘහස්ථ |
| UPC | 765368481877 |
වගකීම් සහ සහාය
Specific warranty information for the Bogen Communications Ceiling Speaker Assembly (Model S810T725PG8UVR) is typically provided with the product packaging or can be found on the official Bogen Communications webවෙබ් අඩවිය. වගකීම් ආවරණය, නියමයන් සහ කොන්දේසි පිළිබඳ විස්තර සඳහා කරුණාකර මෙම සම්පත් වෙත යොමු වන්න.
For technical support, service, or inquiries regarding your Bogen product, please contact Bogen Communications directly. Contact information can usually be found on their official webඅඩවිය හෝ නිෂ්පාදන ලියකියවිලි තුළ.
සටහන: Always provide your product model number (S810T725PG8UVR) and purchase date when seeking support.
