ලෙවිටන් 15 Amp 120 වෝල්ට් ඩුප්ලෙක්ස් සංයෝජන ස්විචය/ප්‍රතිග්‍රාහකය 5225 පරිශීලක අත්පොත

හැඳින්වීම

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Leviton 15 Amp, 120 Volt, Duplex Style Combination Single Pole Switch/Receptacle, Model 5225. This device combines a single-pole switch and a 15 Amp, 125 Volt grounding receptacle in a single unit, designed for commercial and residential applications.

ආරක්ෂිත තොරතුරු

අවවාදයයි: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that power is off before wiring. This device must be installed in accordance with all national and local electrical codes.

• විදුලි පරිපථවල වැඩ කිරීමට පෙර සෑම විටම විදුලිය විසන්ධි කරන්න.
• Use only copper or copper-clad wire. Do not use aluminum wire with this device.
• සියලුම වයර් සම්බන්ධතා ආරක්ෂිත බව සහතික කර ගන්න.
• මෙම උපදෙස්වල කිසියම් කොටසක් පිළිබඳව ඔබට සැකයක් ඇත්නම්, සුදුසුකම් ලත් විදුලි කාර්මිකයෙකුගෙන් විමසන්න.
• මෙම උපාංගය ගෘහස්ථ භාවිතය සඳහා පමණි.

පැකේජයේ අන්තර්ගතය

• One Leviton 15 Amp, 120 Volt, Duplex Style Combination Single Pole Switch/Receptacle (Model 5225-W)

සැකසුම සහ ස්ථාපනය

1. බලය අක්රිය කරන්න: Locate the circuit breaker or fuse that supplies power to the outlet box where you intend to install the device. Turn it OFF. Verify power is off using a voltagඊ පරීක්ෂක.
2. Remove Old Device (if applicable): Carefully remove the existing switch or receptacle from the wall box. Disconnect the wires, noting their connections.
3. වයර් සකස් කරන්න: Strip approximately 1/2 inch (12.7 mm) of insulation from each wire end. Ensure wires are straight.
4. පර්යන්ත හඳුනා ගන්න: The Leviton 5225 device has the following terminals:
   • හරිත බිම් ඉස්කුරුප්පු ඇණ: For the bare copper or green insulated ground wire.
   • Silver Screws: For neutral (white) wires.
   • Brass Screws: For hot (black) wires.
   • Break-off Tabs: Located on the side of the device, these tabs connect the switch and receptacle to the same hot feed. If you need to control the switch and receptacle from separate power sources, carefully break off the tab connecting the brass screws.
5. වයර් සම්බන්ධතා:

   බිම් රැහැන්: Connect the bare copper or green insulated ground wire from the wall box to the green ground screw on the device. Tighten securely.

   උදාසීන වයර්: Connect the white neutral wire from the wall box to one of the silver screws. Tighten securely.

   Hot Wire (Power In): Connect the black hot wire (power source) from the wall box to one of the brass screws. Tighten securely.

   Load Wire (for Switch): If the switch controls a light fixture or other load, connect the load wire to the remaining brass screw. If the switch and receptacle are on the same circuit, and the break-off tab is intact, the switch will control the receptacle. If the tab is broken, the switch will control a separate load connected to its brass screw, and the receptacle will be constantly powered.
6. උපාංගය සවි කරන්න: Carefully fold the wires into the wall box. Secure the device to the wall box using the provided mounting screws.
7. බිතුපත ස්ථාපනය කරන්න: Attach a standard wallplate (not included) over the device.
8. බලය ප්‍රතිස්ථාපනය කරන්න: පරිපථ කඩනයෙහි හෝ ෆියුස් පෙට්ටියෙහි බලය නැවත ක්‍රියාත්මක කරන්න.
9. පරීක්ෂණය: Test the switch and receptacle functionality.

රූපය 1: ඉදිරිපස view of the Leviton 5225 combination switch and receptacle, showing the single pole switch at the top and the 15 Amp receptacle below.

රූපය 2: ආපසු view of the Leviton 5225, illustrating the brass (hot), silver (neutral), and green (ground) wiring terminals, along with the break-off tab. The UPC 0078477965849 is visible.

මෙහෙයුම් උපදෙස්

The single-pole switch operates by toggling the lever up or down to control the connected load. The 15 Amp receptacle functions as a standard electrical outlet for plugging in devices. If the break-off tab is intact, the switch will control power to the receptacle. If the tab is removed, the switch and receptacle operate independently.

නඩත්තු කිරීම

This device requires minimal maintenance. Periodically inspect the device and wallplate for any signs of damage or wear. Clean with a soft, dry cloth. Do not use abrasive cleaners or solvents.

දෝෂගවේෂණය

• No Power to Receptacle/Switch: Check the circuit breaker or fuse. Ensure all wire connections are secure.
• Switch Not Controlling Receptacle: Verify that the break-off tab between the brass screws is intact if you intend for the switch to control the receptacle.
• ලිහිල් සම්බන්ධතා: If the device feels loose in the wall box, ensure mounting screws are tightened.

පිරිවිතර

රූපය 3: පැත්ත view of the Leviton 5225, showing approximate dimensions of 4.4 inches (11 cm) in length.

වගකීම් තොරතුරු

Leviton provides a limited two-year warranty for this device. For specific details regarding warranty coverage and claims, please refer to the official Leviton webවෙබ් අඩවිය හෝ පාරිභෝගික සහාය අමතන්න.

සහාය

For technical assistance, product information, or customer service, please visit the official Leviton website or contact their customer support department. You can find contact information and additional resources at www.leviton.com.