1. හැඳින්වීම
Thank you for choosing the Renkforce 751402 IP65 Touchscreen Keypad Code Lock. This device offers a secure and convenient access control solution, suitable for both indoor and outdoor environments. Its robust, waterproof zinc housing and modern glass surface with white backlighting ensure durability and aesthetic appeal.
This manual provides essential information for the proper installation, operation, and maintenance of your code lock. Please read it thoroughly before use to ensure optimal performance and safety.
රූපය: ඉදිරිපස view of the Renkforce 751402 IP65 Touchscreen Keypad Code Lock, showcasing its sleek design and illuminated numeric keypad.
2. ආරක්ෂිත උපදෙස්
හානි හෝ තුවාල වළක්වා ගැනීම සඳහා, පහත සඳහන් ආරක්ෂක පියවරයන් නිරීක්ෂණය කරන්න:
- ස්ථාපනය සහ ක්රියාත්මක කිරීමට පෙර සියලු උපදෙස් ප්රවේශමෙන් කියවන්න.
- Ensure the power supply meets the device's requirements. Incorrect voltage හානි සිදුවිය හැක.
- Do not attempt to open or modify the device. This will void the warranty and may cause malfunction.
- උපාංගය ශක්තිමත් විද්යුත් චුම්භක ක්ෂේත්ර වලින් ඈත් කරන්න.
- If the device is damaged, do not use it. Contact qualified personnel for repair.
- This product is IP65 rated for water and dust resistance, making it suitable for outdoor use. However, avoid submerging it in water.
3. පැකේජ අන්තර්ගතය
සියලුම අයිතම පවතින බවත් හොඳ තත්ත්වයේ පවතින බවත් තහවුරු කර ගන්න:
- Renkforce 751402 IP65 Touchscreen Keypad Code Lock Unit (1x)
- සවි කිරීමේ දෘඩාංග (ඉස්කුරුප්පු, බිත්ති ප්ලග්)
- උපදෙස් අත්පොත (මෙම ලේඛනය)
4. පිහිටුවීම සහ ස්ථාපනය
The Renkforce 751402 is designed for surface mounting (on-wall installation). Professional installation is recommended for electrical connections.
- ස්ථානයක් තෝරන්න: Select a suitable, secure location on a wall, ensuring it is within reach of necessary wiring (power, door strike, alarm, etc.). The IP65 rating allows for outdoor placement.
- විදුම් ලකුණු සලකුණු කරන්න: Use the device or a template to mark the drilling points for mounting screws on the wall.
- සිදුරු සිදුරු: Drill holes at the marked points and insert appropriate wall plugs if necessary.
- රැහැන් ඇදීම: Connect the necessary wires (power, lock control, alarm output, door contact input) to the terminal block inside the unit. Refer to the wiring diagram provided with the product for specific connections. Ensure power is disconnected during wiring.
- ඒකකය සවි කරන්න: Secure the code lock unit to the wall using the provided screws.
- බලය යොදන්න: Once securely mounted and wired, connect the power supply. The keypad should illuminate, indicating it is ready for operation.
රූපය: කෝණික view of the Renkforce 751402 Code Lock, showing its side profile and robust construction suitable for wall mounting.
5. මෙහෙයුම් උපදෙස්
The Renkforce 751402 features a touchscreen keypad with backlighting for easy operation. It supports up to 99 user codes, offering over 100 million possible code combinations.
5.1. Initial Setup and Master Code
Upon first power-up, the device will be in a default state. You must set a master code to manage user codes and settings. Refer to the specific programming guide included with your product for the exact sequence to set the master code. Typically, this involves entering a default administrator code (e.g., 123456) followed by a programming key, then entering your new master code.
5.2. Adding User Codes
To add a new user code:
- Enter the Master Code, followed by the programming key (e.g., '*').
- Select the option to add a new user code (e.g., '1').
- Enter the desired new user code (e.g., 4-6 digits).
- Confirm the user code by entering it again or pressing a confirmation key (e.g., '#').
- The device will typically provide an audible or visual confirmation of successful programming.
5.3. Opening the Lock
To open the connected lock:
- පසුතල ආලෝකය සක්රිය කිරීමට යතුරු පුවරුව ස්පර්ශ කරන්න.
- වලංගු පරිශීලක කේතයක් ඇතුළත් කරන්න.
- Press the confirmation key (e.g., '#').
- The lock will disengage for a preset duration, allowing access.
5.4. Deleting User Codes
To delete a user code, follow a similar process to adding, but select the delete option and enter the specific user code to be removed.
6. නඩත්තු කිරීම
The Renkforce 751402 code lock requires minimal maintenance due to its durable construction and IP65 rating.
- පිරිසිදු කිරීම: වීදුරු මතුපිට මෘදු, d රෙදි කඩකින් පිස දමන්න.amp cloth. Avoid abrasive cleaners or solvents that could damage the finish or touchscreen.
- පරීක්ෂාව: සවි කරන ඉස්කුරුප්පු වල තද බව වරින් වර පරීක්ෂා කර, ගෙවී යාමේ හෝ හානිවීමේ සලකුණු සඳහා රැහැන් පරීක්ෂා කරන්න.
- පාරිසරික ආරක්ෂාව: While IP65 rated, extreme weather conditions (e.g., prolonged direct sunlight, heavy ice buildup) may affect performance. Ensure proper drainage around the unit if installed outdoors.
7. දෝශ නිරාකරණය
If you encounter issues with your Renkforce 751402, refer to the following common problems and solutions:
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| යතුරු පුවරුව දැල්වෙන්නේ නැත. | බල සැපයුමක් හෝ දෝෂ සහිත රැහැන්වීමක් නොමැත. | Check power connections and ensure the power supply is active. Verify wiring according to the diagram. |
| Code not accepted. | Incorrect code entered or code not programmed. | Ensure the correct code is entered. Verify the code is programmed correctly. Try resetting the device to factory defaults (if applicable, refer to specific product guide) and reprogramming. |
| Lock does not open after correct code. | Faulty lock mechanism or wiring to the lock. | Check the wiring between the code lock and the door strike/lock mechanism. Test the lock mechanism independently if possible. |
| යතුරු පෑඩය ප්රතිචාර නොදක්වයි. | Software glitch or severe power issue. | Disconnect power for 30 seconds, then reconnect. If the issue persists, contact support. |
8. පිරිවිතර
Technical details for the Renkforce 751402 IP65 Touchscreen Keypad Code Lock:
| විශේෂාංගය | විස්තර |
|---|---|
| නිෂ්පාදකයා | රෙන්ක්ෆෝර්ස් |
| ආදර්ශ අංකය | 751402 |
| මානයන් (W x H x D) | 80 x 120 x 35.5 මි.මී |
| බර | ග්රෑම් 510 යි |
| ද්රව්ය | සින්ක් |
| පාලන ක්රමය | ස්පර්ශ කරන්න |
| අගුළු වර්ගය | යතුරු පුවරුව |
| විශේෂ ලක්ෂණ | Alarm output, Tamper contact, Door contact input |
| නිර්දේශිත යෙදුම් | Outdoor equipment, Vehicles, Storage areas |
| IP ශ්රේණිගත කිරීම | IP65 (ජල ආරක්ෂිත) |
| කේත සංයෝජන | මිලියන 100 ඉක්මවයි |
| කේත ගණන | හැකි කේත 99ක් |
| බලශක්ති ප්රභවය | Hand-operated (refers to manual input, not battery) |
| පළමු ලබා ගත හැකි දිනය | 15 ජනවාරි 2020 |
9. වගකීම් සහ සහාය
Renkforce provides a minimum වසර 2ක වගකීමක් from the date of purchase for this product. This warranty covers defects in materials and workmanship under normal use.
If you experience any issues with your Renkforce 751402 code lock, or require technical assistance, please contact your retailer or the Renkforce customer support team. Have your purchase receipt and product model number (751402) ready when contacting support.
