කැෂියෝ 10188556

Casio 10188556 Watch Strap Instruction Manual

For Models: G-300-2A, G-300-3A, G-300-4A, G-301B-1A, G-301BR-1A, G-306X-1A, G-350-2A, G-350-5A

1. නිෂ්පාදන අවසන්view

This document provides instructions for the installation, care, and maintenance of your Casio 10188556 replacement watch strap. This genuine Casio part is designed to fit specific G-Shock models, ensuring a precise fit and durable performance.

ගැළපෙන මාදිලි:

The strap features a black rubber construction with a stainless steel metal buckle and a black rubber loop.

2. ස්ථාපන මාර්ගෝපදේශය

Replacing your watch strap requires careful attention. It is recommended to use appropriate watch tools, such as a spring bar tool, to prevent damage to your watch or the new strap. Spring bars are typically not included with the replacement strap and should be reused from your original watch band if they are in good condition.

2.1 Removing the Old Strap

  1. Place your watch face down on a soft, clean surface to protect it from scratches.
  2. Locate the spring bars that secure the strap to the watch lugs. These are small, spring-loaded pins at each end of the strap.
  3. Using a spring bar tool, carefully compress one end of the spring bar and gently pull the strap away from the watch lug.
  4. Once one end is free, the spring bar can be removed. Repeat this process for the other side of the strap and for the second strap piece.
  5. Retain the spring bars if they are in good condition, as they will be needed for the new strap.

2.2 Installing the New Strap

  1. Insert one end of a spring bar into the hole on the inside of one watch lug.
  2. Place the new strap piece into position. Using the spring bar tool, compress the exposed end of the spring bar and guide it into the corresponding hole on the opposite watch lug.
  3. Gently push and wiggle the strap until you feel the spring bar click securely into place. Pull lightly on the strap to ensure it is firmly attached.
  4. Repeat the process for the second strap piece.
  5. Ensure both strap pieces are securely fastened before wearing the watch. Note that installation can be challenging due to the watch's design; patience is advised.
Casio 10188556 watch strap, top view, showing the buckle and strap holes.

රූපය 1: ඉහළට view of the Casio 10188556 watch strap, highlighting the buckle and adjustment holes.

Casio 10188556 watch strap, bottom view, showing the textured surface and buckle.

රූපය 2: පහළ view of the Casio 10188556 watch strap, displaying its textured underside and the stainless steel buckle.

3. ක්‍රියාත්මක කිරීම සහ ගැලපීම

Once installed, the watch strap operates like any standard buckle-style band.

4. නඩත්තුව සහ රැකවරණය

Proper care will extend the life of your watch strap.

5. දෝශ නිරාකරණය

6. පිරිවිතර

කොටස අංකය10188556
නිෂ්පාදකයාකැසියෝ
ද්රව්යRubber (No Metal Type for strap body)
බෑන්ඩ් වර්ණයකළු
බකල් ද්රව්යStainless Steel Metal Buckle
බකල් වර්ගයටැන්ග් බකල්
ලූප් වර්ගයBlack Rubber Loop
Band Width (Outside Lug)19 මි.මී
Band Width (Inside Lug)16 මි.මී

7. වගකීම් සහ සහාය

This Casio product is covered by the manufacturer's standard warranty against defects in materials and workmanship. For specific warranty terms, conditions, and duration, please refer to the documentation provided with your original watch or visit the official Casio webඅඩවිය.

For technical support, replacement parts, or warranty claims, please contact Casio customer service directly through their official website or authorized service centers. Provide your product model number (10188556) and watch model number for efficient assistance.

නිල කැසියෝ Webඅඩවිය: www.casio.com