Axxess GMOS-05

Axxess GMOS-05 OnStar අතුරුමුහුණත පරිශීලක අත්පොත

Model: GMOS-05 | Brand: Axxess

1. හැඳින්වීම

The Axxess GMOS-05 OnStar Interface is designed to facilitate the replacement of an Original Equipment Manufacturer (OEM) radio with an aftermarket receiver in specific non-amplified GM vehicles. This interface is compatible with vehicles equipped with the "Door-n-Lock" style harness. It ensures the retention of key factory features, including OnStar functionality and safety/warning chimes, while also providing necessary outputs for navigation radio installations.

2 ආරක්ෂිත තොරතුරු

Please read all instructions carefully before installation. Improper installation may result in damage to the vehicle's electrical system, the interface module, or the aftermarket radio.

3. පැකේජ අන්තර්ගතය

Verify that all items are present before proceeding with the installation.

Axxess GMOS-05 Interface Module and Wiring Harnesses
රූපය 3.1: Axxess GMOS-05 Interface Module and Wiring Harnesses. This image displays the main GMOS-05 interface module, a black rectangular box, along with two distinct wiring harnesses. One harness features a large white multi-pin connector, while the other has a smaller black connector, both designed for vehicle integration.

4. පිහිටුවීම සහ ස්ථාපනය

This section provides general instructions for installing the GMOS-05 interface. Specific vehicle disassembly and reassembly procedures are not covered and should be referenced from a vehicle-specific service manual or professional guide.

4.1. රැහැන් සම්බන්ධතා

Match the wires from the GMOS-05 harness to the corresponding wires on your aftermarket radio's harness. Refer to the color codes below.

Close-up of Main Wiring Harness Connector
රූපය 4.1: Close-up of Main Wiring Harness Connector. This image shows a detailed view of the primary wiring harness, highlighting the multi-colored wires and the large white connector that interfaces with the vehicle's factory wiring. A smaller red connector is also visible, typically for specific signal wires.
GMOS-05 Wiring Color Code
වයර් වර්ණයකාර්යයසම්බන්ධ කරන්න
කහ12V නියත බලයAftermarket Radio Yellow Wire
රතු12V උපාංග බලයAftermarket Radio Red Wire
කළුබිමAftermarket Radio Black Wire
දොඩම්ආලෝකකරණයAftermarket Radio Orange Wire (if applicable)
නිල්/සුදුAmpලයිෆයර් සක්රිය කරන්නඅලෙවියෙන් පසු ගුවන් විදුලිය Amp Turn-On Wire (if applicable)
කොළ පාටයිවම් පෙරමුණ කථානායක (+)Aftermarket Radio Left Front Speaker (+)
කොළ/කළුවම් පෙරමුණ කථානායක (-)Aftermarket Radio Left Front Speaker (-)
සුදුදකුණු ඉදිරි කථානායක (+)Aftermarket Radio Right Front Speaker (+)
සුදු/කළුදකුණු ඉදිරි කථානායක (-)Aftermarket Radio Right Front Speaker (-)
අළුවම් පසුපස ස්පීකර් (+)Aftermarket Radio Left Rear Speaker (+)
අළු/කළුවම් පසුපස කථානායක (-)Aftermarket Radio Left Rear Speaker (-)
වයලට්දකුණු පසුපස ස්පීකර් (+)Aftermarket Radio Right Rear Speaker (+)
වයලට් / කළුදකුණු පසුපස ස්පීකර් (-)Aftermarket Radio Right Rear Speaker (-)
ලා කොළවාහන නැවැත්වීමේ තිරිංග ප්රතිදානයAftermarket Radio Parking Brake Input (for navigation)
නිල්Vehicle Speed Sense (VSS) OutputAftermarket Radio VSS Input (for navigation)
දුඹුරුප්රතිලෝම ප්රතිදානයAftermarket Radio Reverse Input (for navigation/camera)

සටහන: This wiring diagram is a general guide. Always refer to the specific wiring instructions provided with your aftermarket radio and vehicle for precise connections.

4.2. ස්ථාපන පියවර

  1. වාහනය සූදානම් කරන්න: Disconnect the negative battery terminal. Remove the factory radio from the dashboard.
  2. වයර් සම්බන්ධතා: Connect the wires from the GMOS-05 harness to the aftermarket radio harness according to the wiring color code (Section 4.1). Solder and heat-shrink all connections for reliability.
  3. Connect GMOS-05 Module: Plug the prepared GMOS-05 harness into the GMOS-05 interface module.
  4. Vehicle Connection: Connect the vehicle-specific connectors from the GMOS-05 harness into the factory wiring harnesses in the vehicle's radio opening.
  5. Navigation Outputs: If installing a navigation radio, connect the Light Green (Parking Brake), Blue (VSS), and Brown (Reverse) wires from the GMOS-05 harness to the corresponding inputs on your navigation radio.
  6. පරීක්ෂණ පද්ධතිය: Before reassembling the dashboard, reconnect the vehicle's negative battery terminal. Turn on the ignition and test the aftermarket radio, OnStar, and safety chimes.
  7. සැකසීම් සීරුමාරු කරන්න: Adjust OnStar volume and chime levels as described in Section 5.1.
  8. අවසාන එකලස් කිරීම: Once all functions are verified, securely mount the aftermarket radio and reassemble the dashboard.

5. Operating Features and Adjustments

The GMOS-05 interface retains several factory features and allows for adjustments to optimize your audio experience.

5.1. OnStar and Chime Volume Adjustment

The GMOS-05 allows for independent adjustment of OnStar volume and safety/warning chime levels. This is typically done via potentiometers (small adjustment screws) located on the GMOS-05 module itself.

Perform these adjustments with the vehicle running and the aftermarket radio powered on to accurately gauge the sound levels.

5.2. Navigation Radio Outputs

The GMOS-05 provides dedicated outputs for aftermarket navigation radios, which require specific vehicle data for proper operation.

6. නඩත්තු කිරීම

The Axxess GMOS-05 interface module is designed for maintenance-free operation once properly installed.

7. දෝශ නිරාකරණය

පොදු ගැටළු සහ විසඳුම්
ගැටලුවවිය හැකි හේතුවවිසඳුම
No audio from aftermarket radio.Incorrect speaker wiring; no power to radio; interface not initialized.Verify all speaker wires are correctly connected. Check 12V constant and accessory power. Ensure the interface is properly connected to the vehicle's data bus.
OnStar or safety chimes are not working or are too loud/quiet.Incorrect connection to GMOS-05; volume potentiometers need adjustment.Confirm the GMOS-05 module is properly connected. Adjust the "OnStar Vol" and "Chime Vol" potentiometers on the module (refer to Section 5.1).
Aftermarket radio does not power on.No 12V constant or accessory power; blown fuse.Check the vehicle's fuse box for blown fuses. Verify the Yellow (constant) and Red (accessory) wires are correctly connected and receiving power.
Navigation features (e.g., parking brake, VSS, reverse) are not functioning.Outputs from GMOS-05 not connected to navigation radio.Ensure the Light Green, Blue, and Brown wires from the GMOS-05 are correctly connected to the corresponding inputs on your navigation radio (refer to Section 4.1).

If troubleshooting steps do not resolve the issue, contact Axxess technical support or a certified installer.

8. පිරිවිතර

9. වගකීම් සහ සහාය

The Axxess GMOS-05 interface is manufactured by Metra Electronics. For warranty claims or technical support, please contact the retailer from whom the product was purchased. The retailer will then coordinate with Metra Electronics for warranty services. It is recommended to retain your proof of purchase for warranty purposes.

For additional technical assistance or detailed product information, please visit the official Axxess or Metra Electronics webඅඩවිය.

අදාළ ලියකියවිලි - GMOS-05

පෙරview Chevrolet Cruze සඳහා AXXESS GMOS-044 ස්ථාපන උපදෙස්
ඒකවර්ණ තිර සහිත Chevrolet Cruze 2011-2016 මාදිලිවල OnStar, chimes සහ සුක්කානම් රෝද පාලන වැනි කර්මාන්තශාලා විශේෂාංග රඳවා තබා ගැනීමට ඉඩ සලසන AXXESS GMOS-044 අතුරුමුහුණත සඳහා සවිස්තරාත්මක ස්ථාපන උපදෙස්.
පෙරview 2005-2011 කැඩිලැක් STS සඳහා Axxess GMOS-13 GM දත්ත අතුරුමුහුණත් ස්ථාපන මාර්ගෝපදේශය
Axxess GMOS-13 GM දත්ත අතුරුමුහුණත සඳහා ස්ථාපන මාර්ගෝපදේශය, 2005-2011 Cadillac STS වාහනවල අලෙවියෙන් පසු මෝටර් රථ ශ්‍රව්‍ය ඒකාබද්ධ කිරීම සක්‍රීය කරමින් OnStar, Bluetooth, සහ වැනි කර්මාන්තශාලා විශේෂාංග රඳවා ගනී. ampලිෆයිඩ් ශබ්ද පද්ධති.
පෙරview Axxess GMOS-LAN-012 Installation Instructions
Detailed installation guide for the Axxess GMOS-LAN-012 interface, providing features like accessory power, retained accessory power, and compatibility with various GM vehicles. Includes wiring instructions, programming steps, and troubleshooting tips.
පෙරview Axxess AX-GMLAN29 GM Data Interface 2006-2017 Installation Guide
Installation instructions for the Axxess AX-GMLAN29 GM Data Interface, designed for 2006-2017 GM vehicles. This guide details interface features, components, vehicle applications, required tools, wiring connections, installation steps, and initialization procedures.
පෙරview Axxess CHTO-013 Installation Instructions for Chrysler Vehicles
Detailed installation guide for the Axxess CHTO-013 interface module, designed for Chrysler, Dodge, Jeep, Mitsubishi, and Volkswagen vehicles from 2004 onwards. Includes wiring instructions, kit features, and testing procedures.
පෙරview AXXESS AXTO-TY2 ටොයොටා Amplifier අතුරුමුහුණත් ස්ථාපන උපදෙස්
AXXESS AXTO-TY2 සඳහා සවිස්තරාත්මක ස්ථාපන මාර්ගෝපදේශය amp2012-ඉහළ ටොයොටා වාහන සඳහා නිර්මාණය කර ඇති ලිෆයර් අතුරුමුහුණත. විශේෂාංග, සංරචක, යෙදුම්, රැහැන් සම්බන්ධතා සහ ක්‍රමලේඛන පියවර ආවරණය කරයි.