TC ඉලෙක්ට්‍රොනික 996004005

TC Electronic VoiceTone D1 Vocal Effects Processor User Manual

මාදිලිය: 996004005

හැඳින්වීම

The TC Electronic VoiceTone D1 is a compact vocal effects processor designed to enhance live vocals with realistic doubling, octave, and detune effects. This pedal provides studio-quality vocal thickening in an easy-to-use format, making it ideal for live performances.

Key features include bringing studio doubling to live performance, Mic-Control for remote on/off via TC-Helicon MP-75 microphone, and offering a classic hit vocal effect.

නිෂ්පාදනය අවසන්view

ඉදිරිපස view of the TC Electronic VoiceTone D1 pedal, showing the TIGHT/LOOSE and DRY/WET knobs, the footswitch, and the D1 Doubling & Detune label.

ඉදිරිපස view of the VoiceTone D1, highlighting the main controls and effect indicator.

කෝණික view of the TC Electronic VoiceTone D1 pedal, showing the top surface with controls and the right side with the Mic Gain knob.

කෝණික view of the pedal, showcasing its compact design and the Mic Gain control on the side.

තවත් කෝණික view of the TC Electronic VoiceTone D1 pedal, showing the top surface with controls and the left side with the Mic Control input.

Alternate angled view, providing a clear look at the Mic Control input on the left side.

පසුපස view of the TC Electronic VoiceTone D1 pedal, displaying the USB port, power input, XLR OUT, and XLR MIC input.

Rear panel of the D1, detailing the various input and output connections for audio and power.

Bottom label of the TC Electronic VoiceTone D1 pedal, showing compliance information, manufacturer details, and power requirements (12V 400mA).

Product label with regulatory compliance and power specifications.

සැලසුම

අසුරනවා

Carefully remove the VoiceTone D1 from its packaging. Retain the packaging for future transport or storage. Inspect the unit for any signs of damage that may have occurred during shipping.

බල සම්බන්ධතාවය

Connect the included 9V DC power adapter to the 'POWER' input on the rear of the VoiceTone D1. Plug the power adapter into a suitable electrical outlet. Ensure the power source provides stable voltage to prevent damage to the unit.

ශ්රව්ය සම්බන්ධතා

  • MIC ආදානය: Connect your microphone to the 'MIC' XLR input on the rear panel using a standard XLR 3-pin cable.
  • OUT Output: Connect the 'OUT' XLR output to your mixer, audio interface, or next pedal in your signal chain using a standard XLR 3-pin cable.

USB සම්බන්ධතාවය

The VoiceTone D1 features a USB port for firmware updates and potential future software integration. Connect a standard USB cable from the pedal to your computer if required for these purposes. This connection is not necessary for basic operation.

මෙහෙයුම් උපදෙස්

පාලනය කරයිview

  • TIGHT/LOOSE Knob: This rotary knob selects the doubling effect type. Rotate it to choose between various doubling and detune styles.
  • DRY/WET Knob: This knob controls the blend between your original (dry) vocal signal and the processed (wet) effect signal. Turn clockwise to increase the effect level.
  • පා මාරුව: The large footswitch on the front of the pedal toggles the effect on and off. The LED indicator will illuminate when the effect is active.
  • MIC GAIN Knob: Located on the side, this knob adjusts the input sensitivity for your microphone. Set it to an appropriate level to avoid clipping or low signal.
  • MIC CONTROL Input: This input allows for remote control of the effect via a compatible TC-Helicon MP-75 microphone.

බලපෑම් මාතයන්

The TIGHT/LOOSE knob offers a range of doubling and detune effects:

  • තද: Creates a precise, in-unison doubling effect, ideal for a clean, layered sound.
  • ලිහිල්: Produces a more natural, slightly offset doubling, simulating two distinct vocalists.
  • කණ්ඩායම: Simulates multiple voices, adding depth and presence to your lead vocal.
  • ඉවත් කරන්න: Adds a slight pitch shift to the doubled voice for a thicker, chorused sound.
  • THICK: Combines doubling with a subtle detune for a rich, full vocal texture.
  • OCT UP: Adds a voice an octave higher than your original vocal.
  • OCT DN: Adds a voice an octave lower than your original vocal.
  • SHOUT: Provides a powerful, layered vocal effect, often used for anthemic or impactful sections.

Footswitch භාවිතා කිරීම

Press the footswitch to engage or bypass the selected effect. The LED will light up when the effect is active. For hands-free control, connect a TC-Helicon MP-75 microphone to the MIC CONTROL input, allowing you to toggle the effect directly from your microphone.

නඩත්තු කිරීම

To ensure the longevity and optimal performance of your VoiceTone D1, follow these maintenance guidelines:

  • පිරිසිදු කිරීම: Keep the unit clean and free from dust. Use a soft, dry cloth to wipe down the exterior. Do not use liquid cleaners, abrasive materials, or solvents, as these can damage the finish and internal components.
  • පරිසරය: Avoid exposing the pedal to extreme temperatures, high humidity, direct sunlight, or excessive vibrations. Operate the unit in a well-ventilated area.
  • ගබඩා: When not in use for extended periods, disconnect the power adapter and store the unit in a cool, dry place, preferably in its original packaging or a protective case.
  • බලය: සෑම විටම නිශ්චිත 9V DC බල ඇඩැප්ටරය භාවිතා කරන්න. වැරදි බල සැපයුමක් භාවිතා කිරීමෙන් ඒකකයට හානි විය හැකි අතර වගකීම් අවලංගු විය හැකිය.

දෝෂගවේෂණය

If you encounter issues with your VoiceTone D1, refer to the table below for common problems and their solutions.

ගැටලුවවිය හැකි හේතුවවිසඳුම
ශබ්ද ප්‍රතිදානයක් නැත.Incorrect cable connections, power issue, DRY/WET knob set to dry.Verify all XLR cables are securely connected to the MIC input and OUT output. Ensure the power adapter is properly connected and the unit is powered on. Increase the DRY/WET knob setting.
Effect is too subtle or too strong.DRY/WET knob setting is not optimal.Adjust the DRY/WET knob to achieve the desired balance between your original vocal and the effect.
ඒකකය බලය සක්රිය නොවේ.Power supply issue, faulty outlet.Ensure the power adapter is correctly plugged into both the pedal and a working electrical outlet. Confirm the power adapter is the correct 9V DC type.
විකෘති හෝ ඝෝෂාකාරී ශබ්දය.Input gain too high, faulty cables.Adjust the MIC GAIN knob to a lower setting. Test with different XLR cables to rule out cable issues.

පිරිවිතර

  • වෙළඳ නාමය: ටීසී ඉලෙක්ට්රොනික
  • ආකෘතිය: 996004005
  • අයිතමයේ බර: Approximately 1.23 pounds (560 Grams)
  • නිෂ්පාදන මානයන්: ආසන්න වශයෙන් 6 x 7 x 3.5 අඟල්
  • බලශක්ති ප්රභවය: රැහැන්ගත විදුලි
  • වෙළුමtage: 9 Volts DC
  • Ampකෝපය: 0.01 මිලිamps (typical operating current)
  • දෘඪාංග අතුරුමුහුණත: USB
  • සංඥා ආකෘතිය: ඇනලොග්
  • මුලින්ම ලබා ගත හැකි: 11 ජනවාරි 2011

වගකීම් සහ සහාය

Specific warranty details for the TC Electronic VoiceTone D1 are not provided within this manual. Please refer to the warranty information included with your product packaging or visit the official TC Electronic webවඩාත්ම යාවත්කාලීන වගකීම් නියමයන් සහ කොන්දේසි සඳහා අඩවිය.

For technical support, service, or further assistance with your VoiceTone D1, please contact TC Electronic customer support through their official website or authorized service centers. Provide your product model number and serial number when seeking support.

අදාළ ලියකියවිලි - 996004005

පෙරview TC ඉලෙක්ට්‍රොනික M100 ඉක්මන් ආරම්භක මාර්ගෝපදේශය
TC ඉලෙක්ට්‍රොනික් M100 ස්ටීරියෝ බහු-ප්‍රයෝග සකසනය සඳහා ඉක්මන් ආරම්භක මාර්ගෝපදේශය, එහි විශේෂාංග, පාලන, ප්‍රයෝග සහ ආරක්ෂක තොරතුරු විස්තර කරයි.
පෙරview TC ඉලෙක්ට්‍රොනික PLETHORA X3 ඉක්මන් ආරම්භක මාර්ගෝපදේශය: TonePrint pedalboard
TC ඉලෙක්ට්‍රොනික් PLETHORA X3 TonePrint Pedalboard එක සැකසීම සහ භාවිතා කිරීම සඳහා සංක්ෂිප්ත මාර්ගෝපදේශය, පුවරු 127ක්, පැඩල් ස්ලොට් 3ක්, MASH පාද ස්විච සහ ටේප් ඩෙක් ලූපර් ඇතුළත් වේ. පුවරු නිර්මාණය කිරීම, TonePrints භාවිතා කිරීම සහ බ්ලූටූත් සම්බන්ධතාවය ගැන ඉගෙන ගන්න.
පෙරview TC Electronic PLETHORA X5 Quick Start Guide: TonePrint Pedalboard with MASH Footswitches
Get started quickly with the TC Electronic PLETHORA X5, a versatile TonePrint pedalboard featuring five MASH footswitches. Learn about its controls, features, specifications, and how to transfer TonePrints.
පෙරview TC ඉලෙක්ට්‍රොනික ඩිටෝ X4 ලූපර් පරිශීලක අත්පොත - ගිටාර් ප්‍රයෝග පැඩල් මාර්ගෝපදේශය
ද්විත්ව ධාවන ගිටාර් ලූපර් පැඩලයක් වන TC ඉලෙක්ට්‍රොනික් ඩිටෝ X4 ලූපර් සඳහා සවිස්තරාත්මක පරිශීලක අත්පොත. එහි විශේෂාංග, පාලන, බලපෑම්, සැකසුම, සම්බන්ධක රූප සටහන් සහ ලූප නිර්මාණය කිරීම සහ කළමනාකරණය කිරීම සඳහා උසස් කාර්යයන් ගැන ඉගෙන ගන්න.
පෙරview TC ඉලෙක්ට්‍රොනික IMPULSE IR LOADER ඉක්මන් ආරම්භක මාර්ගෝපදේශය
TC ඉලෙක්ට්‍රොනික IMPULSE IR LOADER සඳහා ඉක්මන් ආරම්භක මාර්ගෝපදේශය, විස්තර කරන පාලන, මාතයන්, අභිරුචි IR පැටවීම සහ FCC අනුකූලතා තොරතුරු.
පෙරview TC ඉලෙක්ට්‍රොනික හයිපර්ග්‍රැවිටි කුඩා සම්පීඩක පරිශීලක අත්පොත
TC ඉලෙක්ට්‍රොනික් හයිපර්ග්‍රැවිටි මිනි සම්පීඩකය සඳහා පරිශීලක අත්පොත, එහි විශේෂාංග, සැකසුම, පාලනයන්, ටෝන්ප්‍රින්ට් ක්‍රියාකාරිත්වය, ස්ථිරාංග යාවත්කාලීන කිරීම් සහ පිරිවිතර විස්තර කරයි. එහි අති නවීන බහු කලාප සම්පීඩනය සමඟ වෘත්තීයමය වශයෙන් ඔප දැමූ නාද ලබා ගන්නේ කෙසේදැයි ඉගෙන ගන්න.