හැඳින්වීම
The TFA KlimaLogg Pro 30.3039.IT is a professional thermo-hygrometer with an integrated data logger, designed for precise monitoring and recording of temperature and humidity. This device offers high accuracy sensors and a PC interface for comprehensive climate control and data evaluation. This manual provides essential information for the setup, operation, maintenance, and troubleshooting of your KlimaLogg Pro.
Figure 1: TFA KlimaLogg Pro Professional Thermo-Hygrometer.
1. පිහිටුවීම
1.1 බැටරි ස්ථාපනය
The KlimaLogg Pro requires 1 AA battery for operation. A battery is typically included with the device.
- උපාංගයේ පිටුපස බැටරි මැදිරිය සොයා ගන්න.
- බැටරි මැදිරි කවරය විවෘත කරන්න.
- නිවැරදි ධ්රැවීයතාව (+/-) සහතික කරමින් AA බැටරිය ඇතුළු කරන්න.
- බැටරි මැදිරි කවරය ආරක්ෂිතව වසා දමන්න.
1.2 මුලික බලය ක්රියාත්මක කිරීම
After battery installation, the device should power on automatically. The LCD display will show initial readings for temperature and humidity.
1.3 Connecting External Sensors (Optional)
The KlimaLogg Pro supports optional external sensors for expanded monitoring capabilities. Refer to the specific instructions provided with your external sensor for connection details. Once connected, the device will automatically detect and display data from these sensors.
1.4 PC Connection and Software Installation
To utilize the data logging and evaluation features, connect the KlimaLogg Pro to a PC via the provided USB interface. Install the accompanying PC software from the manufacturer's website or included media. This software allows for detailed configuration, data retrieval, and analysis.
2. මෙහෙයුම් උපදෙස්
2.1 ප්රදර්ශනය අවසන්view
The LCD display provides real-time readings for internal temperature and humidity. If external sensors are connected, their readings will also be shown, often cycling through different channels or accessible via specific buttons on the device.
2.2 දත්ත ලොග් කිරීමේ කාර්යය
The KlimaLogg Pro continuously logs temperature and humidity data. The logging interval can be configured via the PC software. The device has internal memory to store recorded data, which can then be transferred to a computer for long-term storage and analysis.
2.3 PC මෘදුකාංගය භාවිතා කිරීම
The PC software is crucial for advanced operation. It enables:
- වින්යාසය: Set recording intervals, alarm thresholds for temperature and humidity, and name individual sensors.
- දත්ත ලබා ගැනීම: Download logged data from the device to your computer.
- Data Evaluation: View historical data in graphical format, analyze trends, and export data (e.g., to CSV format) for further processing.
රූපය 2: උදාample of the KlimaLogg Pro PC software interface for data evaluation.
3. නඩත්තු කිරීම
3.1 බැටරි ප්රතිස්ථාපනය
When the battery indicator appears on the display, replace the AA battery promptly to ensure continuous operation and data logging. Follow the battery installation steps outlined in Section 1.1.
3.2 පිරිසිදු කිරීම
Clean the device with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the display or casing. Ensure no moisture enters the device.
3.3 ගබඩා කිරීම
If storing the device for an extended period, remove the battery to prevent leakage and potential damage. Store in a cool, dry place away from direct sunlight.
4. දෝශ නිරාකරණය
- සංදර්ශකයක්/උපාංගයක් ක්රියාත්මක නොවේ:
Check battery installation and ensure correct polarity. Replace with a fresh AA battery if necessary. Ensure the battery compartment is closed securely.
- වැරදි කියවීම්:
Ensure the device is placed in a location free from direct heat sources, drafts, or excessive moisture. Allow sufficient time for the sensors to stabilize after placement or power-on. Calibrate if possible via software (refer to software manual).
- PC Software Not Detecting Device/Data Transfer Issues:
Verify the USB connection. Ensure the device is within range of the USB receiver if using a wireless connection (for external sensors, if applicable). Close other applications that might interfere with USB communication. Reinstall the PC software if problems persist. Ensure the device is not too far from the USB receiver and there are not too many walls in between, as this can prolong data transfer.
- External Sensor Not Displaying Data:
Check the connection of the external sensor. Ensure the sensor has its own power source (if required) and is within the operational range of the main unit.
5. පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| ආදර්ශ අංකය | 30.3039.IT |
| වෙළඳ නාමය | ටීඑෆ් |
| බලශක්ති ප්රභවය | Battery Powered (1 AA battery required, included) |
| සම්බන්ධතා තාක්ෂණය | USB |
| නිෂ්පාදන මානයන් (D x W x H) | 0.98" x 3.86" x 5.39" (25මි.මී. x 98මි.මී. x 137මි.මී.) |
| අයිතමයේ බර | අවුන්ස 5.2 (ග්රෑම් 147) |
| උෂ්ණත්ව නිරවද්යතාව | ±0.5 °C |
| ඉහළ උෂ්ණත්ව ශ්රේණිගත කිරීම | 50 සෙල්සියස් අංශක |
| සංවේදක තාක්ෂණය | Capacitive/Thermal (Humidity), Thermocouple/RTD (Temperature) |
| සංදර්ශක වර්ගය | LCD |
| වර්ණය | සුදු |
| නිෂ්පාදකයා | TFA Dostmann GmBH + Co. KG |
| විශේෂ ලක්ෂණය | Hygrometer, Data Logger |
6. වගකීම් සහ සහාය
The TFA KlimaLogg Pro is a product of German engineering, known for its quality and precision. For specific warranty information, please refer to the documentation included with your purchase or contact TFA Dostmann directly. For technical support or inquiries, please visit the official TFA Dostmann webවෙබ් අඩවිය හෝ ඔවුන්ගේ පාරිභෝගික සේවා දෙපාර්තමේන්තුව අමතන්න.
